ACTi R21CF-3x Quick start guide

ACTi
Brand
ACTi
Model
R21CF-3x
Type
Quick start guide

ACTi R21CF-3x is the latest face recognition reader from ACTi Corporation. It is a powerful and versatile device that can be used for a wide range of applications, including access control, time and attendance, and visitor management.

The R21CF-3x uses advanced facial recognition technology to identify individuals with a high degree of accuracy. It can store up to 30,000 face templates and can recognize faces even in low-light conditions. The device also features a built-in keypad and display, making it easy to use and configure.

The R21CF-3x is a standalone device, meaning that it does not require a network connection to operate. It can be easily installed and configured using the included software. The device also supports a variety of optional accessories, such as a card reader and a fingerprint scanner.

ACTi R21CF-3x is the latest face recognition reader from ACTi Corporation. It is a powerful and versatile device that can be used for a wide range of applications, including access control, time and attendance, and visitor management.

The R21CF-3x uses advanced facial recognition technology to identify individuals with a high degree of accuracy. It can store up to 30,000 face templates and can recognize faces even in low-light conditions. The device also features a built-in keypad and display, making it easy to use and configure.

The R21CF-3x is a standalone device, meaning that it does not require a network connection to operate. It can be easily installed and configured using the included software. The device also supports a variety of optional accessories, such as a card reader and a fingerprint scanner.

Face Recognition Reader
Quick Start Guide
R21CF-30, R21CF-31, R21CF-32, R21CF-33
2019/08/02
www.acti.com
Quick Start Guide
2
Thank you for using ACTi Face Recognition Reader. This documentation contains information on
the quickest way to enroll users on your device.
NOTE: The accuracy of the analytics algorithm may be affected by different environmental
factors or inappropriate installation. Please follow the procedures in this guide. ACTi will
not be held liable for inaccuracies resulting from the aforesaid causes.
Standalone Mode Enrollment
Face Enrollment
In Standalone Mode, you can use touch screen to perform enrollment and system configuration
without the need of network connection.
1. Once powered up, the device shows below the screen below.
Current date and time
Standalone Mode
button
Current Operating Mode:
1:N Identification
(1 to Many)
Keypad to enter User ID
for 1:1 verification
www.acti.com
Quick Start Guide
3
2. Press the Standalone Mode button, then enter Root Passcode (default:
1234, followed by Enter Key) to enter.
3. Once authenticated, point to the “User” page to start “User Manager”.
Default Root Passcode:
1234 Mode button
Select “User” page
Start “User Manager”
www.acti.com
Quick Start Guide
4
4. Select the Enrollment page and fill in user information. Steps are:
Enter User ID from on-screen keypad or badge a card to read card ID
User Name and Alias ID are optional
For security purposes, it is suggested to enroll at least one Root User
For user who wears glasses, check “Wear Glasses”
Click “Start Enrollment” to start
“Enrollment” page
Click button to open
on-screen keyboard for
user ID/name editing
www.acti.com
Quick Start Guide
5
5. The system now goes into Enrollment mode and start a 3-second countdown.
The user is required to stand in front of the device and position the face
properly.
6. During the enrollment, gently tile the face up and down, then gently move
closer and farther. If you wear glasses, you will be asked to remove the glasses
half way through the enrollment.
7. Follow the screen message and voice instructions to complete the enrollment.
When face is locked in green square box,
enrollment proceeds
www.acti.com
Quick Start Guide
6
Quick Recognition Test
1. Only enrolled user can be recognized. If user has not been enrolled, please refer to
Section B and perform user enrollment.
2. If the device is set to 1:N mode, simply approach to the machine to start authentication.
Like enrollment, recognition will occur only when the face is locked at Green square
box. User who is identified will be granted with a green check and a voice welcome.
Green bar shows how
close the user to be
identified
Passed
score
Enrolled
picture with
user info
www.acti.com
Quick Start Guide
7
3. If the device is set to 1:1 mode, user must scan a card or enter user ID from the touch
screen first before the device could perform facial recognition.
4. If face is not locked at green square box, please move a little closer or farther from the
device and gently nod head up and down. Recognition should occur.
Under 1:1 mode, enter
User ID and Enter key to
start verification
www.acti.com
Quick Start Guide
8
Accessing the Configurations
1. Press the Standalone Mode button, and enter root passcode to enter Standalone Mode.
If a root user is already registered, you need the root user face to be verified before
entering.
2. Select the Settings page, then press “Configurations” button
Select “Settings” page
Press “Configurations”
www.acti.com
Quick Start Guide
9
3. Configurations are divided into multiple pages, for instance, you can configure operating
mode (1:N or 1:1 mode) and recognition threshold at Facial Recognition page.
4. Press “Submit” button for the changes to take effect.
5. Then press the upper-right arrow to leave Standalone Mode.
Select Operating Mode:
1:N or 1:1 here
Adjust Threshold of facial
recognition if necessary
Press to leave
Standalone Mode
Copyright © 2018, ACTi Corporation All Rights Reserved
7F, No. 1, Alley 20, Lane 407, Sec. 2, Ti-Ding Blvd., Neihu District, Taipei, Taiwan 114, R.O.C.
TEL : +886-2-2656-2588 FAX : +886-2-2656-2599
Email: [email protected]om
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10

ACTi R21CF-3x Quick start guide

ACTi
Brand
ACTi
Model
R21CF-3x
Type
Quick start guide

ACTi R21CF-3x is the latest face recognition reader from ACTi Corporation. It is a powerful and versatile device that can be used for a wide range of applications, including access control, time and attendance, and visitor management.

The R21CF-3x uses advanced facial recognition technology to identify individuals with a high degree of accuracy. It can store up to 30,000 face templates and can recognize faces even in low-light conditions. The device also features a built-in keypad and display, making it easy to use and configure.

The R21CF-3x is a standalone device, meaning that it does not require a network connection to operate. It can be easily installed and configured using the included software. The device also supports a variety of optional accessories, such as a card reader and a fingerprint scanner.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents