Features
•
Compression molded from our exclusive solid Vikrell
®
material
•
Allows for future attachment of grab bars
•
Modular 4-piece design
•
Pivot ″snap together″ installation
•
Wall surround available with smooth finish or glazed
tile appearance
•
10-year consumer/3-year commercial limited warranty
•
Not recommended for bath only installation
•
Caulkless seam installation
•
15″ (38.1 cm) bath depth (floor to top of threshold)
•
60-1/4″ (153 cm) x 31-1/4″ (79.4 cm) x 73-1/4″
(186.1 cm) complete unit rough-in dimensions include
flanges
•
60″ (152.4 cm) x 30″ (76.2 cm) x 72″ (182.9 cm)
complete unit finished dimensions
Codes/Standards Applicable
Specified model meets or exceeds the following:
•
ANSI Z124.1.2
•
ASTM E162
•
ASTM E662
•
CSA B45
60″ (152.4 cm) BATH AND WALL
SURROUND WITH BACKER BOARDS
71140116
ALSO 71140126, 71240116, 71240126
Colors/Finishes
•
0: White
•
Other: Refer to Price Book for additional colors/finishes
Specified Model
Model Complete Unit Description Colors/Finishes
71140116 60″ (152.4 cm) bath and wall surround, tile wall, backer boards, left drain ❑ 0 ❑ Other_____
71140118 60″ (152.4 cm) AFD bath and wall surround, tile wall, backer boards, left
drain
❑ 0 ❑ Other_____
71140126 60″ (152.4 cm) bath and wall surround, tile wall, backer boards, right
drain
❑ 0 ❑ Other_____
71140128 60″ (152.4 cm) AFD bath and wall surround, tile wall, backer boards,
right drain
❑ 0 ❑ Other_____
71240116 60″ (152.4 cm) bath and wall surround, smooth wall, backer boards, left
drain
❑ 0 ❑ Other_____
71240118 60″ (152.4 cm) AFD bath and wall surround, smooth wall, backer boards,
left drain
❑ 0 ❑ Other_____
71240126 60″ (152.4 cm) bath and wall surround, smooth wall, backer boards, right
drain
❑ 0 ❑ Other_____
71240128 60″ (152.4 cm) AFD bath and wall surround, smooth wall, backer boards,
right drain
❑ 0 ❑ Other_____
ACCORD
®
Page 1 of 2
1067280-4-
F
For more information
visit SterlingPlumbing.com
or call 1-800-STERLING
Technical Information
Fixture*:
Basin area:
Bathing well 46-1/4″ (117.5 cm) x 20-1/2″ (52.1 cm)
Top area 52-1/4″ (132.7 cm) x 22-1/2″ (57.2 cm)
To overflow:
Water depth 11″ (27.9 cm)
Capacity 34 gal (128.7 L)
* Approximate measurements for comparison only.
Model door maximum
width
door maximum
height
71140116
71140118
71140126
71140128
71240116
71240118
71240126
71240128
56-3/4″ (144.1 cm) 56-1/2″ (143.5 cm)
Installation Notes
Install this product according to the installation guide.
Product is designed to be used with a single-handle mixer
valve with an escutcheon cover not to exceed 7-3/4″ (19.7
cm) in width.
Size the drain cutout to fit the drain assembly that will be
used.
Studs should be positioned roughly as shown.
Bath cannot be installed without the wall surround.
The width of the module gets 5/8″ (1.6 cm) narrower at the
back. Furring strips (approximately 1/4″ (6 mm)) should be
used at the back corner studs if the drywall will overlap the
nailing flange.
Overflow Detail
30" (76.2 cm)
14" (35.6 cm)
4" (10.2 cm)
16" (40.6 cm)
Back Wall
End Wall
Drain Cutout
3-1/8" (7.9 cm)
31-1/4" (79.4 cm)
30" (76.2 cm)
59-3/8"
(150.8 cm)
1-1/4"
(3.2 cm)
22-1/4"
(56.5 cm)
55"
(139.7 cm)
73-1/4"
(186.1 cm)
8"
(20.3 cm)
6" (15.2 cm)
(Typical)
31-1/4"
(79.4 cm)
3-1/2"
(8.9 cm)
2" (5.1 cm) D.
Drain
10"
(25.4 cm)
15"
(38.1 cm)
17"
(43.2 cm)
19"
(48.3 cm)
1" (2.5 cm)
7-15/16"
(45.6 cm)
41"
(104.1 cm)
60"
(152.4 cm)
22"
(55.9 cm)
15-1/4"
(38.7 cm)
8"
(20.3 cm)
16"
(40.6 cm)
Dimensions are taken from
the center of the grout lines.
11/16"
(1.7 cm)
Backer board
11/16" (1.7 cm)
3-3/4" (9.5 cm)
12-7/8"
(32.7 cm)
2" (5.1 cm)
60-1/8" (152.7 cm) Min
60-1/4" (153 cm) Max
Product Diagram
ACCORD
®
ACCORD
®
60″ (152.4 cm) BATH AND WALL SURROUND WITH BACKER BOARDS
Page2of2
1067280-4-
F
/