Sterling 71140112 Specification Sheet

Type
Specification Sheet

This manual is also suitable for

Features
Compression molded from our exclusive solid Vikrell
®
material
Above-floor-drain (AFD) rough-in
Durable high-gloss finish
Modular 4-piece design
Pivot snap together installation
Wall surround available with smooth finish or glazed
tile appearance
10-year consumer/3-year commercial limited warranty
Caulkless seam installation
17-1/4 (43.8 cm) bath depth (floor to top of
threshold)
60-1/4 (153 cm) x 31-1/4 (79.4 cm) x 75-1/2
(191.8 cm) complete unit rough-in dimensions include
flanges
60 (152.4 cm) x 30 (76.2 cm) x 74-1/4 (188.6 cm)
complete unit finished dimensions
Codes/Standards Applicable
Specified model meets or exceeds the following:
ANSI Z124.1.2
ASTM E162
ASTM E662
CSA B45.5
60 (152.4 cm) AFD BATH AND WALL
SURROUND
71140112
ALSO 71140122, 71240112, 71240122
Colors/Finishes
0: White
Other: Refer to Price Book for additional colors/finishes
Specified Model
Model Complete Unit Description Colors/Finishes
71140112 60 (152.4 cm) AFD bath and wall surround, tile wall, left drain 0 Other_____
71140122 60 (152.4 cm) AFD bath and wall surround, tile wall, right drain 0 Other_____
71240112 60 (152.4 cm) AFD bath and wall surround, smooth wall, left drain 0 Other_____
71240122 60 (152.4 cm) AFD bath and wall surround, smooth wall, right drain 0 Other_____
Model ADA Adaptive Component Description Colors/Finishes
71140118 AFD complete unit with age in place backers, left drain 0 Other_____
71140128 AFD complete unit with age in place backers, right drain 0 Other_____
71240118 AFD complete unit with age in place backers, left drain 0 Other_____
71240128 AFD complete unit with age in place backers, right drain 0 Other_____
ACCORD
®
Page 1 of 2
1067279-4-
F
For more information
visit SterlingPlumbing.com
or call 1-800-STERLING
Technical Information
Fixture*:
Basin area:
Bathing well 46-1/4 (117.5 cm) x 20-1/2 (52.1 cm)
Top area 52-1/4 (132.7 cm) x 22-1/2 (57.2 cm)
To overflow:
Water depth 11 (27.9 cm)
Capacity 34 gal (128.7 L)
* Approximate measurements for comparison only.
Model door maximum
width
door maximum
height
71140112
71140122
71240112
71240122
56-3/4 (144.1 cm) 56-1/2 (143.5 cm)
Installation Notes
Install this product according to the installation guide.
Product is designed to be used with a single-handle mixer
valve with an escutcheon cover not to exceed 7-3/4 (19.7
cm) in width.
Size the drain hole clearance to fit the drain assembly that will
be used.
Studs should be positioned roughly as shown.
Bath cannot be installed without the wall surround.
The width of the module gets 5/8 (1.6 cm) narrower at the
back. Furring strips (approximately 1/4 (6 mm)) should be
used at the back corner studs if the drywall will overlap the
nailing flange.
30" (76.2 cm)
15-1/4"
(38.7 cm)
8"
(20.3 cm)
8"
(20.3 cm)
14"
(35.6 cm)
60-1/8" (152.7 cm) Min
60-1/4" (153 cm) Max
4" (10.2 cm)
16" (40.6 cm)
55"
(139.7 cm)
75-1/2"
(191.8 cm)
1-1/4" (3.2 cm)
3-1/8" (7.9 cm)
Overflow Detail
3-1/2"
(8.9 cm)
2" (5.1 cm) D.
Drain
10"
(25.4 cm)
31-1/4"
(79.4 cm)
6" (15.2 cm)
(Typical)
21-1/4"
(54 cm)
20-1/4"
(51.4 cm)
2" (5.1 cm)
Minimum Drain
Hole Clearance
Through Wall
22-1/4"
(56.5 cm)
59-3/8"
(150.8 cm)
31-1/4"
(79.4 cm)
30"
(76.2 cm)
17-1/4"
(43.8 cm)
60"
(152.4 cm)
3" (7.6 cm) Drain
Bottom to Floor
Product Diagram
ACCORD
®
ACCORD
®
60 (152.4 cm) AFD BATH AND WALL SURROUND
Page2of2
1067279-4-
F
  • Page 1 1
  • Page 2 2

Sterling 71140112 Specification Sheet

Type
Specification Sheet
This manual is also suitable for

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI