ITC 696T-FF-XXX User manual

696T-FF-XXX
ITC
Brand
ITC
Model
696T-FF-XXX
Type
User manual
3030 Corporate Grove Dr.
Hudsonville, MI 49426
Phone: 616.396.1355
itc-us.com
For warranty information please visit www.itc-us.com/warranty-return-policy
DOC #: 710-00219 • Rev B • 11/02/2022
1. Determine the installation location for your light and mark
the location of the holes needed. Center the wire exit hole
between two screw holes.
PARTS/TOOLS NEEDED:
Tread Step Light Drill & Drill Bit Screws (Included)
IMPORTANT SAFETY INSTRUCTIONS. READ CAREFULLY FOR YOUR PROTECTION AND SAVE ALL INSTRUCTIONS.
• Disconnect power before installing, adding or changing any component.
• To avoid a hazard to children, account for all parts and destroy all packing materials.
• It is recommended that fuse protection be added to the positive (+) input.
4. Wire the light following the wiring diagram below.
+12V
White (+)
Black (-)
Incoming
12V DC
Power
Fuse
2. Pre-drill a 1/4” hole for the wires.1 Pre-Drill 2 1/8” holes 2
3. Use the screws to attach the light housing to the desired
location.
5. Snap the bezel on the light housing.
INSTALLATION INSTRUCTIONS
Tread Step Light
Part#: 696T-FF-XXX
Page 1 of 1
12
  • Page 1 1

ITC 696T-FF-XXX User manual

696T-FF-XXX
ITC
Brand
ITC
Model
696T-FF-XXX
Type
User manual
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents