Pelco DX8100 PC Keyboard PTZ Control User manual

Brand: Pelco

Model: DX8100 PC Keyboard PTZ Control

Type: User manual

DX8100 PC KEYBOARD PTZ CONTROL REFERENCE

DX8100_PC_KBD_PTZ_CONTROL

Pelco and the Pelco logo are registered trademarks of Pelco.

Information subject to change without notification.

World Headquarters

3500 Pelco Way, Clovis, California 93612 USA

USA & Canada Tel: 866/587-2503 Fax: 800/289-9150

International Tel: 1-559/348-5504 Fax: 1-559/348-1120

www.pelco.com

DX8100 PC KEYBOARD PTZ CONTROL REFERENCE

To use the keyboard (+) and (-) keys to control camera pan and tilt speed:

1. On the DX8100 toolbar, click .

2. Select a PTZ-enabled camera from the Site tree.

3. Click the mouse pointer in the camera’s view panel.

4. Press and hold the up/down and left/right arrows to pan and tilt the camera.

5. Press the plus (+) key once or more to increase the pan and tilt speed. Press the minus (-) key once or more to decrease the pan and tilt

speed.

Key Description

Insert and Delete These keys provide the following functionality:

• On-screen display, preset and pattern modes: Insert increases and Delete decreases focus,

performing the same actions as the focus control on the PTZ keypad.

• Remote camera programming mode: Insert and Delete perform the same actions as the PTZ keypad

focus (+) and (-) buttons, navigating up and down the camera menu choices.

Home and End These keys provide the following functionality:

• On-screen display, preset and pattern modes: The Home key opens and the End key closes the iris,

performing the same actions as the PTZ keypad iris (+) and (-) buttons.

• Remote camera programming mode: The Home key selects an option from the camera’s on-screen

menu. The End key cancels an option or exit a menu. These keys perform the same actions as the PTZ

keypad iris (+) and (-) buttons.

Page Up and Page Down These keys perform the same functionality in the on-screen display and the preset and pattern modes as the

PTZ keypad zoom (+) and (-) buttons. Page Up zooms in; Page Down zooms out.

Up and Down Arrows These keys provide the following functionality:

• On-screen display, preset and pattern modes: The up arrow key raises the camera and the down

arrow key lowers the camera. The keys perform the same actions as the mouse to move the camera.

• Remote camera programming mode: The arrow keys navigate up and down the camera menu

choices. The keys perform the same actions as the PTZ keypad focus (+) and (-) buttons.

Left and Right Arrows These keys provide the same actions as using the mouse to move the camera. The left arrow key pans the

camera to the left and the right arrow key pans the camera to the right.

+ and - These keys perform similar actions as using the mouse to change the speed of camera movement. The plus

(+) key, pressed once increases the camera’s pan and tilt speed. The minus (-) key pressed once decreases the

camera’s pan and tilt speed. Each time the plus (+) key is pressed the pan and tilt speed is increased toward

the maximum speed. Each time the minus (-) key is pressed, the pan and tilt speed is decreased toward the

minimum speed.

Users with PTZ access rights (Standard User by default) and higher can use a PC keyboard to operate PTZ and

lens functions of cameras that supportsuch features.

PTZ and lens functions can be controlled in Live mode using the keyboard.

The following table describes the keyboard buttons that you use to control PTZ and lens functions.

Rotate the mouse wheel forward to zoom in and backward to zoom out.

Pelco DX8100 PC Keyboard PTZ Control User manual

Pelco DX8100 PC Keyboard PTZ Control User manual

Pelco DX8100 PC Keyboard PTZ Control User manual

Related papers

Other documents