Contec SPF10SQ1700 Reference guide

Reference Manual

CONTENTS

Wall mount type Solution-ePC series

SPF10SQ1700

Introduction .................................................................. 5

Safety Precautions .................................................... 11

Product Nomenclature and Function ............... 18

Hardware Setup ........................................................ 28

BIOS Set up ................................................................. 39

Software RAID Setup ............................................... 68

Hardware RAID Setup ............................................. 82

Driver & Utility ........................................................ 101

Appendix ................................................................... 105

Customer Support and Inquiry ......................... 115

-

2

-

Table of Contents

Introduction ...................................................................... 5

1. Related Manuals ......................................................................................................................................................6

2. About the Product ..................................................................................................................................................7

3. Features ......................................................................................................................................................................8

4. Supported OS ...........................................................................................................................................................9

5. Product Configuration List ............................................................................................................................... 10

Safety Precautions ......................................................... 11

1. Safety Information ............................................................................................................................................... 12

2. Handling Precautions ......................................................................................................................................... 13

1. FCC PART 15 Class A Notice ...................................................................................................................... 15

2. EN55032 Class A Notice ............................................................................................................................. 15

3. KC Class A Notice .......................................................................................................................................... 15

4. BSMI Notice ..................................................................................................................................................... 16

3. Security Warning .................................................................................................................................................. 17

1. Information security risks ........................................................................................................................... 17

2. Security measures – e.g. ............................................................................................................................. 17

Product Nomenclature and Function ........................... 18

1. Nomenclature of Product Components ..................................................................................................... 19

2. Description of Product Components ........................................................................................................... 20

1. LED: PWR, HDD, LAN ................................................................................................................................... 20

2. Power Switch: POWER SW ......................................................................................................................... 20

3. Reset Switch: RESET SW .............................................................................................................................. 20

4. Storage bay: 5-inch bay .............................................................................................................................. 20

5. Serial Port Interface: SERIAL ...................................................................................................................... 21

6. DVI-I Interface: DVI-I .................................................................................................................................... 22

7. USB 3.2 Gen1 Ports: USB3.2 Gen1 (USB3.0) ........................................................................................ 23

8. USB 2.0 Ports: USB2.0 .................................................................................................................................. 23

9. Giga bit-Ethernet: LAN ................................................................................................................................ 24

10. Expansion Slot ................................................................................................................................................ 25

11. Connector on motherboard ...................................................................................................................... 27

Hardware Setup ............................................................. 28

1. Before Using the Product for the First Time ............................................................................................. 29

2. Hardware Setup .................................................................................................................................................... 30

1. Installing an Expansion Card .................................................................................................................... 31

2. Installing an HDD/SSD (When Using a Removable Case) ............................................................. 33

3. Installing the Mounting Brackets ............................................................................................................ 36

4. Installation Requirements .......................................................................................................................... 37

-

3

-

Table of Contents

BIOS Set up ..................................................................... 39

1. Introduction ........................................................................................................................................................... 40

1. Starting Setup ................................................................................................................................................. 40

2. Using Setup ..................................................................................................................................................... 41

3. Getting Help .................................................................................................................................................... 41

4. In Case of Problems ..................................................................................................................................... 41

2. Main Menu ............................................................................................................................................................. 42

1. Setup Items ...................................................................................................................................................... 42

3. Main .......................................................................................................................................................................... 43

4. Configuration ........................................................................................................................................................ 44

1. CPU Configuration ........................................................................................................................................ 46

2. Chipset Configuration ................................................................................................................................. 47

3. LAN Configuration ........................................................................................................................................ 48

4. Graphic Configuration ................................................................................................................................. 49

5. PCI/PCIE Configuration ............................................................................................................................... 50

6. SATA Configuration ...................................................................................................................................... 51

7. USB Configuration ........................................................................................................................................ 52

8. Power Control Configuration ................................................................................................................... 53

9. TPM Configuration ....................................................................................................................................... 54

10. Super IO Configuration ............................................................................................................................... 55

11. H/W Monitor ................................................................................................................................................... 57

12. Serial Port Console Redirection ............................................................................................................... 58

13. Intel(R) I210 Gigabit Network Connector ............................................................................................ 59

5. Security .................................................................................................................................................................... 60

6. Boot Configuration ............................................................................................................................................. 62

7. Save & Exit .............................................................................................................................................................. 64

1. Boot Device Setting ...................................................................................................................................... 65

2. Setting to Turn On Power (AT operation) with AC Power On ...................................................... 66

Software RAID Setup ..................................................... 68

1. Outline ..................................................................................................................................................................... 69

2. Software RAID Setting in the BIOS ............................................................................................................... 70

3. Delete RAID Volume ........................................................................................................................................... 75

4. Software RAID Monitoring Tool ..................................................................................................................... 76

1. Rapid storage technology install ............................................................................................................ 76

2. Starting the rapid storage technology ................................................................................................. 76

3. Exiting the rapid storage technology .................................................................................................... 78

4. Rebuild mirroring .......................................................................................................................................... 79

5. For the error .................................................................................................................................................... 80

6. Confirming the error log ............................................................................................................................ 81

7. RAID setup when replacing the storage (OS) .................................................................................... 81

Hardware RAID Setup .................................................... 82

1. Outline ..................................................................................................................................................................... 83

2. Function Specifications ...................................................................................................................................... 84

-

4

-

Table of Contents

1. Mirror card product specifications ......................................................................................................... 84

2. Switch and connector positions and settings .................................................................................... 85

3. Switch settings ............................................................................................................................................... 86

3. Mirror Card Operation ....................................................................................................................................... 88

1. Operation flow ............................................................................................................................................... 88

2. Error occurrence ............................................................................................................................................ 89

3. RAID setup during HDD replacement ................................................................................................... 90

4. Hot-swapping ................................................................................................................................................. 92

4. OS Recovery Settings ......................................................................................................................................... 93

5. FAQ / Troubleshooting ...................................................................................................................................... 94

1. FAQ ..................................................................................................................................................................... 94

2. Troubleshooting............................................................................................................................................. 95

Driver & Utility ............................................................. 101

1. Outline ...................................................................................................................................................................102

2. Driver & Utility Directory ................................................................................................................................103

3. Various Drivers ....................................................................................................................................................104

Appendix ...................................................................... 105

1. System Reference...............................................................................................................................................106

1. Specifications ................................................................................................................................................106

2. Physical Dimensions .........................................................................................................................................109

3. Commodity Model ............................................................................................................................................110

4. Battery Disposal..................................................................................................................................................112

1. Battery Specification ..................................................................................................................................112

2. Dispose of the Battery ...............................................................................................................................113

Customer Support and Inquiry ................................... 115

1. Services ..................................................................................................................................................................116

-

5

-

Introduction

This section provides necessary information of the product

such as the outline, bundled items and manuals before

actual use.

—

Introduction

—

SPF10SQ1700 Reference Manual

-

6

-

1. Related Manuals

The manuals related to the product are listed below.

Read them as necessary along with this document.

 Must Read the Following Manuals.

Name

Purpose

Contents

How to get

Product Guide

Must read this after

opening the package.

This lists the product

configuration and describes the

precautions.

Included in the package

(Printed matter)

Reference Manual

(This document)

Read this when operating

the product.

This describes the hardware

aspects such as functions and

settings.

Download from

the

Contec

website (PDF)

IPC Precaution List

Read this before operating

the product.

This describes the precautions

when using the product.

Download from

the

Contec

website (PDF)

Windows Setup

Manual

*1

Must read this after

opening the package.

This describes the Windows

Setup that is required when

using the product for the first

time.

Download from

the

Contec

website (PDF)

Windows Recovery

Manual *1

Must read this after

opening the package.

This describes the procedure to

restore the factory settings

using the recovery disc, such as

when the Windows system is

damaged.

Download from

the

Contec

website (PDF)

MICROSOFT

SOFTWARE

LICENSE TERMS *1

Must read this after

opening the package.

This describes the rights and

conditions of user when using

Windows software.

Download from

the

Contec

website (PDF)

*1 Reference for pre-installed models only.

 Download MICROSOFT SOFTWARE LICENSE TERMS

Download it from the following URL.

Download

https://www.contec.com/support/useterms/

 Download Manuals

Download the manuals accordingly from the following URL.

Download

https://www.contec.com/download/

—

Introduction

—

SPF10SQ1700 Reference Manual

-

7

-

2. About the Product

This product is a compact-sized industrial computer that is compatible with 6th-generation (Skylake)

and 7th-generation (Kaby Lake) of Intel® Core™ series processors and adopts the Q170 chipset. In

addition to a wide range of interfaces, the product also includes seven PCI bus expansion slots and

one PCI Express (x16) bus expansion slot. The product adopts a reliable, Japan-made power supply

(made by Nipron).

Solution-ePC is an industrial-use computer that offers BTO (Build to Order) specifications to suit the

requests of customers.

Only carefully selected components offering high reliability and stable supply are used, making the

product suitable for industrial use.

Various selections and options are available to meet customer requests, including OS, CPU, memory,

and storage options.

—

Introduction

—

SPF10SQ1700 Reference Manual

-

8

-

3. Features

 Compatible with Intel ® Core ™ processor series

Skylake/Kaby Lake

Available with a power-saving, high-performance 6th- or 7th-generation Core processor for advanced computation and drawing

performance while minimizing power consumption.

 Compact wall-mounted design

The compact size allows for installation in spaces as small as 330 mm (W) × 408.8 mm (D) × 175 mm (H).

 CPU and chipset designed for embedded devices

The adoption of embedded CPUs and chipsets makes it possible to ensure supply stability.

 Expandable to up to eight PCI and PCI Express slots

Take advantage of seven PCI bus expansion slots and one PCI Express (x16) bus expansion slot.

 Rich variety of interfaces for freely expandable

peripherals

It has a variety of extended interface such as PCI Express (×16) x 1slot, PCI x 7, DVI-I x 1, 1000BASE-T x 2, USB3.2 Gen1 (USB3.0) x 5 (Max.),

USB2.0 x 2, serial (RS-232C) x 2 (Max.), serial (RS-232C/RS-422A/RS-485) x 2 (Max.).

 Reliable, Japan-made power supply

The power supply—an essential component of the product—is made in Japan for superior reliability and system performance.

—

Introduction

—

SPF10SQ1700 Reference Manual

-

9

-

4. Supported OS

 Windows 10 IoT Enterprise 2019 LTSC 64bit (Japanese / English / Chinese / Korean)

 Windows 7 Professional for Embedded Systems SP1 32bit (Japanese / English)

(*When selecting a 6th-generation CPU processor only)

 Windows 7 Embedded Systems 32bit (Japanese)

(*When selecting a 6th-generation CPU processor only)

—

Introduction

—

SPF10SQ1700 Reference Manual

-

10

-

5. Product Configuration List

The product consists of the items listed below.

Check, with the following list, that your package is complete.

If you discover damaged or missing items, contact your retailer.

SPF10SQ1700-Sxxxxxx0xxxxx

Name

Pcs.

The Main Body

1

Mount Bracket

2

Rubber Feet

4

COM Cable *1

1

Pan-head Screw (#6-32UNCx5)

12

Three-point Sems Screw (M3 x 6)

12

Hexagon-head Screw for Mount Bracket (M4 x 6)

4

DVI-Analog RGB Branch Cable

1

Power Cord (125VAC 3P)

1

Security Key *1

2

Keyboard *1

1

Mouse *1

1

Slot cover *2

1

Power Code (BSMI) *1

1

Product Guide (this sheet)

1

*1 Configuration differs depending on the selection.

*2 The number of included items varies depending on the selection.

-

11

-

Safety Precautions

Understand the following definitions and precautions to

use the product safely.

Never fail to read them before using the product.

—

Safety Precautions

—

SPF10SQ1700 Reference Manual

-

12

-

1. Safety Information

This document provides safety information using the following symbols to prevent accidents

resulting in injury or death and the destruction of equipment and resources.

Understand the meanings of these labels to operate the equipment safely.

DANGER

Signal word used to indicate an imminently hazardous situation which,

if not avoided, will result in death or serious injury.

WARNING

Signal word used to indicate a potentially hazardous situation which,

if not avoided, could result in death or serious injury.

CAUTION

Signal word used to indicate a potentially hazardous situation which,

if not avoided, could result in minor or moderate injury.

—

Safety Precautions

—

SPF10SQ1700 Reference Manual

-

13

-

2. Handling Precautions

WARNING

 Always check that the power supply is turned off before connecting or disconnecting AC

power cable.

 Do not use the product in locations exposed to a flammable or corrosive gas. It may cause

explosion, fire, electrical shock, or malfunction.

 Do not touch metal parts (edge connector) with your hands. Otherwise, the product may

malfunction, or cause failure.

 When transporting the product, pack it in the same condition as delivered from the Contec or

in equal packing condition to avoid applying shock, vibration, or static electricity directly to

the product.

 Do not modify the product.

 Always turn off the power before inserting or removing the cards or cables.

 This product is not intended for use in aerospace, space, nuclear power, medical equipment,

or other applications that require a very high level of reliability. Do not use the product in

such applications.

 If using this product in applications where safety is critical such as in railways, automotive, or

disaster prevention or security systems, please contact your retailer.

 Do not attempt to replace the battery as inappropriate battery replacement poses a risk of

explosion.

 For battery replacement, contact your retailer as it must be performed as a process of repair.

 When disposing of a used battery, follow the disposal procedures stipulated under the

relevant laws and municipal ordinances. For details on replacing the battery, refer to the

appendix.

 This product is connected to a socket-outlet with earthing connection by means of a power

cord.

 This product is not suitable for use in locations where children are likely to be present.

CAUTION

 Do not use or store this product in a location exposed to high or low temperature that

exceeds range of specification or susceptible to rapid temperature changes.

 e.g. - Exposure to direct sun - In the vicinity of a heat source

 Do not use this product in extremely humid or dusty locations. It is extremely dangerous to

use this product with its interior penetrated by water or any other fluid or conductive dust. If

this product must be used in such an environment, install it on a dust-proof control panel, for

example.

—

Safety Precautions

—

SPF10SQ1700 Reference Manual

-

14

-

 Avoid using or storing the product in locations subject to shock or vibration that exceeds

range of specification.

 Do not use this product in the vicinity of devices that generate strong magnetic force or

noise. Such products will cause this product to malfunction.

 Do not use or store this product in the presence of chemicals.

 To clean this product, wipe it gently with a soft cloth dampened with either water or mild

detergent. Do not use chemicals or a volatile solvent, such as benzene or thinner, to prevent

pealing or discoloration of the paint.

 CONTEC does not provide any guarantee for the integrity of data on storage.

 Always disconnect the power cable from the receptacle before mounting or removing the

expansion card, before connecting or disconnecting any connector.

 To prevent corruption of files, always shutdown the OS before turning off this product.

 CONTEC reserves the right to refuse to service a product modified by the user.

 In the event of failure or abnormality (foul smells or excessive heat generation), unplug the

power cord immediately and contact your retailer.

 Use the AC power cable that matches the power supply voltage and outlet plug that you are

using. (The supplied cable is designed for use with a 125 VAC power supply.)

 Always turn off the power before replacing storage. It is not hot-swappable. Removing the

storage during the operation may results in system damages.

 Continuously operating the product may decrease the service life of the hard disk drive, so

use the standby mode.

 Component Life:

- Power --------------The assumed life is about 4 years when the product is continuously

operated at a temperature of 40°C. However, it may be shortened

due to operating temperature.

- Battery--------------The internal calendar clock and CMOS RAM are backed by a Lithium

primary battery. The backup time at a temperature of 25°C with the

power disconnected is 7 years.

- SSD (256GB MLC) --Endurance (Terabytes Written): 370(TB)

- SSD (512GB 3D TLC) Endurance (Terabytes Written): 880(TB)

- SSD (1TB 3D TLC) --Endurance (Terabytes Written): 31,760(TB)

- System FAN --------The expected life: 5 years at a temperature of 40°C

- CPU-FAN -----------The expected life: 5 years at a temperature of 40°C

* Replacement of expendables is handled as a repair (there will be a charge).

 To connect with peripherals, use a grounded, shielded cable.

 Do not use a UPS (Uninterruptible Power Supply) that generates square waves. Connecting

the product to this type of UPS may lead to product failure.

 If you use this product in a noisy environment, attach a ferrite core to each cable (LAN, USB,

serial and DVI-I) to stabilize the operation.

 When the product power is turned on/off, undefined data may be output from the serial port.

Configure a system that can handle such a case on the receiving side.

—

Safety Precautions

—

SPF10SQ1700 Reference Manual

-

15

-

1. FCC PART 15 Class A Notice

NOTE

This equipment has been tested and found to comply with the limits for a Class A digital device,

pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection

against harmful interference when the equipment is operated in a commercial environment.

This equipment generates, uses, and can radiate radio frequency energy and, if not installed and

used in accordance with the instruction manual, may cause harmful interference to radio

communications. Operation of this equipment in a residential area is likely to cause harmful

interference in which case the user will be required to correct the interference at his own expense.

FCC WARNING

Changes or modifications not expressly approved by the party responsible for compliance could void

the user's authority to operate the equipment.

2. EN55032 Class A Notice

Warning:

Operation of this equipment in a residential environment could cause radio interference.

3. KC Class A Notice

사용자 안내문

이 기기는 업무용 환경에서 사용할 목적으로 적합성평가를 받은 기기로서 가정용 환경에서

사용하는 경우 전파간섭의 우려가 있습니다.

—

Safety Precautions

—

SPF10SQ1700 Reference Manual

-

16

-

4. BSMI Notice

警告:為避免電磁干擾,本產品不應安裝或使用於住宅環境。

商品名稱: 微型計算機

報驗義務人名稱: 台灣康泰克股份有限公司

地址:新北市中和區中正路738號9樓

CAUTION

 Refer to "Environment Requirements (P108)" for KC and BSMI configurations.

 The object of the standard of this product become only a main body.

—

Safety Precautions

—

SPF10SQ1700 Reference Manual

-

17

-

3. Security Warning

When connecting to the network, be aware of security-related problems. See the examples of

Security measures below and set up the product properly along with the network devices.

1. Information security risks

 Unauthorized access from the outside through a network could cause the system halt, data

damage, or exposure to malware. *1

 Invaded and used as a stepping stone, a device might attack the others through networks. (a

victim becomes an assailant)

 Information might leak without realizing due to the connection to the network.

 Secondary damages such as harmful rumors, liability in damages, social credibility fall, and

opportunity loss are expected led by the troubles described above.

*1: Malware (Malicious Software) is software that brings harm to a computer system and performs

unintended operations.

2. Security measures – e.g.

 Do not keep using the default password. (Refer to the product manual for the password

setting).

 Set a strong password.

Combined with upper and lowercase letters, and numbers so that it cannot be easily

analogized by others.

 Change the password periodically.

 Disable unnecessary network services and functions.

 Restrict access to the network with network devices. *2

 Restrict ports to be released on the network with network devices. *2

 Create a closed network connection using such as dedicated network or VPN*3

*2: Inquire for setting procedure to manufacturers.

*3: VPN (Virtual Private Network) a secured network that wards off unauthorized access by

protecting the communication path with authentication and encryption.

Unfortunately, there are no perfect ways to avert unauthorized access or close a security hole

that are endlessly found day and night.

Please understand that risks are always involved with the Internet connection, and we strongly

recommend a user should constantly update information security measures.

-

18

-

Product Nomenclature

and Function

This section describes product component names and their

functions, pin assignment of each connector.

—

Product Nomenclature and Function

—

SPF10SQ1700 Reference Manual

-

19

-

1. Nomenclature of Product Components

Component names of the product are shown in the figure below.

Name

Function

Front

PWR LED

Power ON display LED

HDD LED

SATA device access display LED

POWER SW

Power switch

RESET SW

System Reset switch

5-inch bay A

DVD: Super multi drive or Storage (HDD, SSD) *1

5-inch bay B

Storage (HDD, SSD) *1*3

USB2.0

USB2.0 (TYPE-A connector) 2 port (Front)

Rear

DVI-I

DVI-I 1 port

USB 1

USB3.2 Gen1 (USB3.0) (TYPE-A connector) 1 port

LAN 1

1000BASE-T/100BASE-TX/10BASE-T (RJ-45 connector)

I219-LM: Ethernet

LAN 2

1000BASE-T/100BASE-TX/10BASE-T (RJ-45 connector)

I210-AT: Ethernet 2

SERIAL 1/2 *1

RS-232C (9pin D-SUB connector (male)) 2 port COM1/COM2

SERIAL 3/4 *1 *2

RS-232C/RS-422A/RS-485 (9pin D-SUB connector (male))

2 port COM3/COM4

USB 2/3 *1*2

USB3.2 Gen1 (USB3.0) (TYPE-A connector) 2 port

USB 4/5 *1*2

USB3.2 Gen1 (USB3.0) (TYPE-A connector) 2 port

H-RAID UNIT *1*2

Hard-RAID unit

AC power SW

Main power switch

AC INLET

100 - 240VAC Power input connector

*1 These may not be installed depending on the product configuration.

*2 These are exclusively used in expansion slots.

*3 The KC/BSMI type (Type: S71-P542010502008) is a DVD (Super Multi drive) installed in 5-inch bay

B.

—

Product Nomenclature and Function

—

SPF10SQ1700 Reference Manual

-

20

-

2. Description of Product Components

Components such as connectors, switches are described.

1. LED: PWR, HDD, LAN

Five LED is equipped with the two of the product.

LED name

State (Display color)

Display content

PWR LED

Off

Power of this product Indicates that the OFF state.

ON (Green)

Power of this product Indicates that the ON state.

HDD LED

ON (Red)

It indicates that the SATA device is an access state.

2. Power Switch: POWER SW

This is the power switch.

3. Reset Switch: RESET SW

This product has a reset switch.

4. Storage bay: 5-inch bay

This product includes two 5-inch bays.

Page is loading ...

Contec SPF10SQ1700 Reference guide

Contec SPF10SQ1700 Reference guide

Related papers

Other documents