2. Computers & electronics
  3. Telecom & navigation
  4. Mobile phones
  5. Car kits
  6. Cypress Semiconductor
  7. POWERPSOC CY3267

Cypress Semiconductor POWERPSOC CY3267 Quick start guide

  • Hello! I am an AI chatbot trained to assist you with the Cypress Semiconductor POWERPSOC CY3267 Quick start guide. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
EVALUATION KIT QUICK START GUIDE
1
2
CY3267 POWERPSOC
®
LIGHTING
• Download and Install the latest kit
software and examples from
www.cypress.com/go/CY3267
3
4
• Use the GUI installed on the PC to control
LEDs. See the user guide for more
information about the GUI
5
• Connect the main board to the PC using the
USB cable provided with the kit
• Touch the ON/OFF CapSense
®
button to
toggle the LEDs. Touch the COLOR CapSense
button to cycle through colors
• Mount the optical diffuser on the LED
daughter board. Connect the power supply
to the main board
• Connect the CY3267 PowerPSoC
®
board to
the LED daughter board; see the user guide
for instructions
6
© 2011 - 2014 Cypress Semiconductor Corporation. All rights reserved.
All trademarks or registered trademarks referenced herein are the properties of their respective owners.
Doc.# 001-50556 Rev.*F
EVALUATION KIT QUICK START GUIDE
For the latest information about this kit, visit www.cypress.com/go/CY3267
CY3267 PowerPSoC Lighting Evaluation Kit Details
CY3267 POWERPSOC
®
LIGHTING
Refer to this image to connect the LED Daughter Card Interface on
the main board and the Main Board Interface on the daughter board.
Note that the Buck or Boost Topology is required for the onboard
rmware to work properly
CHANNEL
BUCK or BOOST TOPOLOGY
BUCK - BOOST TOPOLOGY
RED
(J6)
BLUE
(J7)
AMBER
(J10)
GREEN
(J11)
LED_RED+ (WHITE)
LED_RED- (ORANGE)
J6
BCK or BST
+
BCK-BST
BCK-BST
LED_BLUE+ (PINK)
LED_BLUE- (BLUE)
J7
BCK or BST
+
BCK or BST
LED_AMBER+ (YELLOW)
LED_AMBER- (GRAY)
J10
BCK-BST
+
BCK or BST
LED_GREEN+ (BROWN)
LED_GREEN- (PURPLE)
J11
BCK-BST
+
BCK-BST
LED_RED+ (WHITE)
J6
BCK or BST
+
BCK-BST
LED_BLUE+ (PINK)
LED_BLUE- (BLUE)
J7
BCK or BST
+
BCK-BST
LED_AMBER+ (YELLOW)
J10
BCK or BST
+
LED_AMBER- (GRAY)
LED_GREEN+ (BROWN)
J11
+
LED_GREEN- (PURPLE)
Main Board
Interface
Debug Interface
Power Supply Input
VDD Selection Jumper
FirstTouch RF Interface
CY8CLED04DOCD1
PowerPSoC Device
Artaex Radio
Module Interface
CapSense Buttons
Full Speed USB Interface
Programming Header
for CY8C24894
Programming Header for
CY8CLED04DOCD1
LED Daughter Board
Interface
Fan and Thermistor
Interface
Port Extension Header
Temperature
Sensor
HBLED
Module
BCK-BST
BCK or BST
LED_RED- (ORANGE)
/