ABB M22001 series User manual

Brand: ABB

Model: M22001 series

Type: User manual

This manual is also suitable for

ABB M22001 series is a high-quality range of low-energy presence detectors. They are suitable for flush-mounted installation, for example, in offices, meeting rooms, schools, hotels and residential buildings. For rooms with high ceilings, M22001 detectors offer a unique combination of a high mounting height of up to 5 meters and a compact size of only 80 mm in diameter and 28 mm in depth. The sensing area can be restricted using the enclosed segments to achieve optimum adaptation to the room situation.

VER:1.0 │ │ 31.03.2014

ABB-Welcome M

Pos: 2 /Di nA4 - Anl eitun gen Online /Inh alt /KNX /Doo rEntry /832 20-A P- xxx/Tit el blat t - 832 20-AP -xxx - AB B @ 1 9\mod_ 132 3249 806 476_15. docx @ 11 108 4 @ @ 1

M2304

Video distributor

=== Ende der List e für Tex tma rke Cov er ===

ABB

-Welcome

| — 2 —

Pos: 4 /Bus c h-Jaege r (N eust rukt ur)/Mo dul-S truk tur/Onl i ne-D oku mentati on/ Inhal tsve rzeich nis ( --> Fü r alle Doku mente <-- )/Inhal tsve rzeic hnis @ 19\ mod_13 206 490 44386_1 5.d ocx @ 109 653 @ @ 1

1 Safety .......................................................................................................... 3

2 Intended use ................................................................................................ 3

3 Environment ................................................................................................ 3

3.1 ABB devices ..................................................................................... 3

4 Operation .................................................................................................... 5

4.1 Control elements ............................................................................... 5

4.2 Operating modes .............................................................................. 5

5 Technical data ............................................................................................. 7

6 Mounting / Installation .................................................................................. 8

6.1 Requirements for the electrician......................................................... 8

6.2 General installation instructions ......................................................... 9

6.3 Mounting ......................................................................................... 10

=== E nde der Liste für Textma rke TOC == =

ABB

-Welcome

| — 3 —

Pos: 6 /Bus ch-J aege r (N eust rukt ur)/Mo dul-S truk tur/Onl i ne-D oku mentati on/Ü be rschri ften (- -> Für alle D okum ent e <--)/ 1. Eb ene/S - T/Si cherhei t @ 18\ mod _13026 127 917 90_ 15.doc x @ 103 357 @ 1 @ 1

1 Safety

Pos: 7 /Busc h-Ja ege r (Neus truk tur)/ Mo dul-St ruktu r/Onli ne-D oku ment ation /Si cherhei t (-- > Für all e Dok umente <--)/W arn hinwei se /Sicher heit - 230 V @ 18\mod_ 130 260 681675 0_15 .docx @ 1033 08 @ @ 1

Warning

Electric voltage!

Risk of death and fire due to electrical voltage of 100-240 V.

– Work on the 100-240V supply system may only be performed by

authorised electricians!

– Disconnect the mains power supply prior to installation and/or

disassembly!

Pos: 8 /Bus c h-Jaege r (N eust rukt ur)/Mo dul-S t ruktu r/Onli ne-D oku ment ation /Übe rschri ften (--> Für alle D okum ent e <--)/ 1. Eb ene/A - F/B estim mun gsge mäßer Gebrau ch @ 18\ mod_13 027 6332 1316_1 5.do cx @ 1034 83 @ 1 @ 1

2 Intended use

Pos: 9 /Di nA4 - Anl eitun gen Online /Inh alt/K NX /Doo rEntry /832 20-AP -x xx/B esti mmungs gem aess er Ge bra uch - 83 220 -AP-x xx- 500 @ 2 0\mo d_1 324561 168 699 _15. docx @ 11272 8 @ @ 1

The M2304 video distributor is an integral part of the ABB Welcome M door

communication system and operates exclusively with components from this system.

Device M2304 can be mounted easily inside flush-mounted box, or surface mounted on

the wall by one screw.

Pos: 10 /B usc h-J aeger (Neus truk tur )/Modul -S trukt ur/O nline -Doku me ntatio n/Übe rsc hrif ten ( --> Fü r alle Doku men te <-- )/1. E bene /U - Z/U mw elt @ 18\ mod _13 026 1415896 7_1 5.d ocx @ 103383 @ 1 @ 1

3 Environment

Pos: 11 /B us ch-J aeger (Neus truk tur )/M odul -Strukt ur/O nli ne-D oku mentati on/ Umw elt ( --> F ür all e Doku me nte <-- )/Hinw eis e/Hinw eis - U mwel t - Hi nweis El ektr oge räte @ 1 8\mo d_1302 763 973 434 _15. docx @ 10350 0 @ @ 1

Consider the protection of the environment!

Used electric and electronic devices must not be disposed of with

domestic waste.

– The device contains valuable raw materials which can be recycled.

Therefore, dispose of the device at the appropriate collecting

depot.

Pos: 12 /D i nA4 - A nlei tu ngen Onlin e/U eb ersc hrift en/2 ./A BB Gera ete @ 19 \mo d_1 323 162 843832_ 15. doc x @ 11 087 5 @ 2 @ 1

3.1 ABB devices

Pos: 13 /B usc h-Jaeg er (Neus truk tur )/Modul -S trukt ur/O nline -Doku me ntatio n/Umw elt ( --> F ür all e Doku me nte <-- )/Hinwei s e/Hinw ei s - Umwel t - AB B E lektro gerät e @ 19\ mo d_13231 627 458 39_15. docx @ 110 867 @ @ 1

All packaging materials and devices from ABB bear the markings and test seals for

proper disposal. Always dispose of the packaging material and electric devices and their

components via the authorized collecting depots and disposal companies.

ABB

-Welcome

| — 4 —

ABB products meet the legal requirements, in particular the laws governing electronic and

electrical devices and the REACH ordinance.

(EU-Directive 2002/96/EG WEEE and 2002/95/EG RoHS)

(EU-REACH ordinance and law for the implementation of the ordinance (EG)

No.1907/2006)

ABB

-Welcome

| — 5 —

Pos: 18 /Di nA 4 - A nleitu ngen Onlin e/U ebersc hri ft en/1 ./Bedie nun g @ 18\mod_ 130 261 392 416 5_15.doc x @ 1 033 65 @ 1 @ 1

4 Operation

Pos: 19 /D i nA4 - A nlei tu ngen O nlin e/Ueb ersc hri ft en/2 ./Nor male r Bet rieb @ 18 \mo d_1 302 768 820965_ 15. doc x @ 10 3540 @ 2 @ 1

4.1 Control elements

Pos: 20 /Di nA 4 - A nleitu ngen Onli ne/ Ueb ersc hrift en/3 ./B edie nele men te @ 20\ mod_13 232 6022 055 9_1 5.do cx @ 1 116 47 @ 3 @ 1

Pos: 21 /Di nA 4 - A nleitu ngen O nlin e/In halt/K NX/ Do orEnt ry/83 220 -AP-xx x/Be dienel eme nte - 8322 0-AP -xxx @ 18\ mod_1 3032 128 53605_ 15.d ocx @ 103 673 @ @ 1

Fig. 1: Overview of control buttons

No. Functions

1 Bus in/out

2 4 outputs for indoor stations or risers

For details see “Operating modes”.

3 Terminal resistor ON / OFF.

In video installations or combined audio- and video- installations, the

switch must be set as 'RC on' at the last device of the line.

Pos: 22 /B usch-J aeg er (N eust ruktur )/M odul -Strukt ur/O nline -Doku me ntatio n/St euer mod ule - Onli ne-Dok ume ntati on ( --> Für alle Dok ume nte <- -)/ +++++ +++++ ++ Sei ten umbruch ++++ ++++ +++ + @ 9\m od_126 8898 668 093_0. docx @ 52149 @ @ 1

ABB

-Welcome

| — 6 —

4.2 Control elements

A. In a building, a video distributor divides the video signal into 4 branches in

connection with the indoor stations.

B. For a residential complex, the video distributor can be used to divide the video signal

into 4 risers.

ABB

-Welcome

| — 7 —

Pos: 76 /D i nA4 - A nlei tu ngen Onlin e/U eb ersc hrift en/1 ./T echni sc he D aten @ 18 \mo d_1 302 615 863 001 _15. docx @ 10 341 6 @ 1 @ 1

5 Technical data

Pos: 77 /D i nA4 - A nl eitu ngen Onlin e/In hal t/KN X/Do orE nt ry/83 220 -AP -xxx/ Tech nisc he D ate n - 832 20-A P-x xx @ 1 8\m od_ 130 321 285 4559 _15. docx @ 1 037 05 @ @ 1

Designation Value

Operating temperature -25° C to +55° C

Storage temperature -40° C – +70° C

Protection IP 20

Single-wire clamps 2 x 0.28 mm² – 2 x 1 mm²

Fine-wire clamps 2 x 0.28 mm² – 2 x 1 mm²

Bus voltage 20-30 V

Pos: 78 /B usch-J aeg er (N eust ruktur )/M odul -Strukt ur/O nline -Doku me ntatio n/S teuer mod ule - Onli ne-D okume ntati on ( --> Für alle Dok ume nte <- -)/ +++++ +++++ ++ S eiten umbruch ++++ ++ +++++ + @ 9\m od_126 8898 668 093_0. docx @ 521 49 @ @ 1

ABB

-Welcome

| — 8 —

Pos: 79 /B us ch-J aeg er (Neus truk t ur)/M odul -S trukt ur/O nline -Doku me ntatio n/Ü bers ch rifte n (--> Für all e D oku mente < -- )/1. E bene /M - O/ Mont age / Ins tallat io n @ 18\ mod _13 0261 396 6111_1 5.do cx @ 1 033 73 @ 1 @ 1

6 Mounting / Installation

Pos: 80 /B usch-J aeg er (N eus trukt ur)/M odul -Strukt ur/O nli ne-Dok ume ntatio n/S iche rheit (--> Für alle D oku ment e <--) /War nhinweis e/S iche rheit - Nie ders pannun gs- und 230 V-Leit ung en @ 18\ mod _13026 178 214 91_15. docx @ 103 465 @ @ 1

Warning

Electric voltage!

Risk of death and fire due to electrical voltage of 100-240 V.

– Low-voltage and 100-240 V cables must not be installed together in

a flush-mounted socket!

In case of a short-circuit there is the danger of a 100-240 V load on

the low-voltage line.

Pos: 81 /B us ch-J aeger (Neus truk tur )/M odul -Strukt ur/O nli ne -Doku ment atio n/Si che rheit (- -> Für alle D ok ument e < --)/W ar nhinweis e/S iche rheit - Fachk ennt nisse @ 18 \mod_1 302 774 384 017_15. doc x @ 10 356 4 @ 2 @ 1

6.1 Requirements for the electrician

Warning

Electric voltage!

Install the device only if you have the necessary electrical engineering

knowledge and experience.

• Incorrect installation endangers your life and that of the user of the

electrical system.

• Incorrect installation can cause serious damage to property, e.g.

due to fire.

The minimum necessary expert knowledge and requirements for the

installation are as follows:

• Apply the "five safety rules" (DIN VDE 0105, EN 50110):

1. Disconnect from power;

2. Secure against being re-connected;

3. Ensure there is no voltage;

4. Connect to earth;

5. Cover or barricade adjacent live parts.

• Use suitable personal protective clothing.

• Use only suitable tools and measuring devices.

• Check the type supply network (TN system, IT system, TT system)

to secure the following power supply conditions (classic connection

to ground, protective earthing, necessary additional measures,

etc.).

Pos: 82 /D i nA4 - A nl eitu ngen Onlin e/In halt /KNX /Do orE nt ry/M onta ge/ Montage hi nweis e - Al lg emei n @ 1 9\m od_ 131056 367 047 8_15 .docx @ 1 077 43 @ 2 @ 1

ABB

-Welcome

| — 9 —

6.2 General installation instructions

• Terminate all branches of the wiring system via a connected bus device (e.g., indoor

station, outdoor station, system device).

• Do not install the system controller directly next to the bell transformer and other

power supplies (to avoid interference).

• Do not install the wires of the system bus together with 100-240 V wires.

• Do not use common cables for the connecting wires of the door openers and wires of

the system bus.

• Avoid bridges between different cable types.

• Use only two wires for the system bus in a four-core or multi-core cable.

• When looping, never install the incoming and outgoing bus inside the same cable.

• Never install the internal and external bus inside the same cable.

ABB

-Welcome

| — 10 —

6.3 Mounting

Pos: 85. 1 /Di nA4 - Anlei t ung en Onl ine/I nhal t/K NX /DoorE ntry/ 832 20-A P-xxx / Monta ge - Mo dule/ Mon tage - Mon tage dos e -- 83 220 -AP -xxx @ 19\ mod _132 325040 684 8_1 5.doc x @ 1 110 98 @ @ 1

Device M2304 can be easily mounted in the flush-mounted box or surface mounted on the

wall by a screw.

Mounted with flush-mounted box

Mounted on the wall

Pos: 83 /B usch-J aeg er (N eust ruktur )/M odul -Strukt ur/O nline -Doku me ntatio n/St euer mod ule - Onli ne-Dok ume ntati on ( --> Für alle Dok ume nte <- -)/ +++++ +++++ ++ Sei ten umbruch ++++ ++++ +++ + @ 9\m od_126 8898 668 093_0. docx @ 52149 @ @ 1

ABB

-Welcome

Pos: 95 /Di nA 4 - Anl eitu ngen Onl in e/In halt/K NX/D oorE nt ry/Proj ekti erung -M erkbl att/P roj ektie rPos: 9 7 /Bus ch-J aege r (N eust ruktu r)/Mo dul-S tr uktu r/Onli ne-D oku ment ation /Rücks eit en (-- > Für alle Dok um ente <--)/R ücks eit e - Bus ch-J aeger - All gemei n @ 20\ mod _13273 200 748 86_15. doc x @ 137 103 @ @ 1

Notice

=== Ende der List e für Tex tma rke Ba ckcove r ===