ABB Video indoor station M2233x-x User manual

Category
Door intercom systems
Type
User manual

This manual is also suitable for

VER:1.3 28.04.2017
ABB-Welcome
Pos: 2 /Di nA4 - Anl eitun gen Online /Inh alt /KNX /Doo rEntry /832 20-A P- xxx/Tit el blat t - 832 20-AP -xxx - ABB @ 1 9\mod_ 132 3249 806 476_15. docx @ 11 108 4 @ @ 1
M2233.-.
7" Video hands-free indoor
station
=== Ende der List e für Tex tma rke Cov er ===
ABB
-Welcome
| — 2 —
Pos: 4 /Bus c h-Jaege r (N eust rukt ur)/Mo dul-S truk tur/Onl i ne-D oku mentati on/ Inhal tsve rzeich nis ( --> Fü r alle Doku mente <--)/I nhal tsve rzeic hnis @ 19\ mod_13 206 490 44386_1 5.d ocx @ 109 653 @ @ 1
1 Safety ....................................................................................................... 4
2 Intended use ............................................................................................. 4
3 Environm ent .............................................................................................. 4
3.1 ABB devices ............................................................................. 4
4 Operation .................................................................................................. 6
4.1 Standard operations .................................................................. 6
4.1.1 Control elements ....................................................................... 6
4.1.2 Welcome screen and status bar ................................................. 8
4.2 Control actions ........................................................................ 10
4.2.1 Surveillance ............................................................................ 10
4.2.2 Intercom ................................................................................. 11
4.2.3 Calling guard unit .................................................................... 12
4.2.4 Switch actuator ....................................................................... 13
4.2.5 Setting up the voice and video connections .............................. 14
4.2.6 Opening the door .................................................................... 15
4.2.7 Muting .................................................................................... 16
4.2.8 Activating the custom function ................................................. 17
4.2.9 Event and picture memory/history ............................................ 19
4.2.10 Information.............................................................................. 23
4.2.11 Inserting an SD card................................................................ 24
4.2.12 Settings .................................................................................. 25
4.2.12.1 Overview ................................................................................ 25
4.2.12.2 Intercom ................................................................................. 28
4.2.12.3 Switch actuator ....................................................................... 31
4.2.12.4 Program button ....................................................................... 33
4.2.12.5 Leave home management ....................................................... 34
4.2.12.6 Voice message ....................................................................... 36
4.2.12.7 Setting door open password .................................................... 38
4.2.12.8 Blacklist .................................................................................. 39
4.2.12.9 Audio settings ......................................................................... 40
4.2.12.10 Auto-unlock ............................................................................. 42
4.2.12.11 Display settings ....................................................................... 44
4.2.12.12 Date and time ......................................................................... 46
4.2.12.13 Camera list ............................................................................. 48
4.2.12.14 Language ............................................................................... 49
4.2.12.15 Setup ...................................................................................... 50
4.2.12.16 Firmware update ..................................................................... 52
4.3 Cleaning ................................................................................. 53
4.4 Adjusting the device ................................................................ 54
ABB
-Welcome
| — 3 —
4.4.1 Terminal resistor ..................................................................... 54
4.4.2 Connection ............................................................................. 55
5 Technical data......................................................................................... 56
6 Mounting/Installation ............................................................................... 57
6.1 Requirements for the electrician............................................... 57
6.2 General installation instructions ............................................... 58
6.3 Mounting ................................................................................. 59
=== E nde der Li ste für Tex tmarke TOC ===
ABB
-Welcome
| — 4 —
Pos: 6 /Bus ch-J aege r (N eust rukt ur)/Mo dul-S truk tur/Onl i ne-D oku mentati on/Ü be rschri ften (- -> Für alle D okum ent e <--)/ 1. Eb ene/S - T/Si cherhei t @ 18\ mod _13026 127 917 90_ 15.doc x @ 103 357 @ 1 @ 1
1 Safety
Pos: 7 /Busc h-Ja ege r (Neus truk tur)/ Mo dul-St ruktu r/Onli ne-D oku ment ation /Si cherhei t (-- > Für all e Dok umente <--)/W arn hinwei se /Sicher heit - 230 V @ 18\mod_ 130 260 681675 0_15 .docx @ 1033 08 @ @ 1
Warning
Electric voltage!
Dangerous currents flow through the body when coming into direct or
indirect contact with live components.
This can result in electric shock, burns or even death.
Disconnect the mains power supply prior to installation and/or
disassembly!
Permit work on the 110-240 V supply system to be performed only by
specialist staff!
Pos: 8 /Bus c h-Jaege r (N eust rukt ur)/Mo dul-S t ruktu r/Onli ne-D oku ment ation /Übe rschri ften (--> Für alle D okum ent e <--)/ 1. Eb ene/A - F/B estim mun gsge mäßer Gebrau ch @ 18\ mod_13 027 6332 1316_1 5.do cx @ 1034 83 @ 1 @ 1
2 Intended use
Pos: 9 /Di nA4 - Anl eitun gen Online /Inh alt/K NX /Doo rEntry /832 20-AP -x xx/B esti mmungs gem aess er Ge bra uch - 83 220 -AP-x xx- 500 @ 2 0\mo d_1 324561 168 699 _15. docx @ 11272 8 @ @ 1
This device is an integral part of the ABB-Welcome door communication system and
operates exclusively with components from this system. The device must only be
installed in dry indoor rooms.
Pos: 10 /B usc h-J aeger (Neus truk tur )/Modul -S trukt ur/O nline -Doku me ntatio n/Übe rsc hrif ten ( --> Fü r alle Doku men te <-- )/1. E bene /U - Z/U mw elt @ 18\ mod _13 026 1415896 7_1 5.d ocx @ 103383 @ 1 @ 1
3 Environment
Pos: 11 /B us ch-J aeger (Neus truk tur )/M odul -Strukt ur/O nli ne-D oku mentati on/ Umw elt ( --> F ür all e Doku me nte <-- )/Hinw eis e/Hinw eis - U mwel t - Hi nweis El ektr oge räte @ 1 8\mo d_1302 763 973 434 _15. docx @ 10350 0 @ @ 1
Consider the protection of the environment!
Used electric and electronic devices must not be disposed of with
household waste.
The device contains valuable raw materials that can be recycled.
Therefore, dispose of the device at the appropriate recycling
facility.
Pos: 12 /D i nA4 - A nlei tu ngen Onlin e/U eb ersc hrift en/2 ./A BB Gera ete @ 19 \mo d_1 323 162 843832_ 15. doc x @ 11 087 5 @ 2 @ 1
3.1 ABB devices
Pos: 13 /B usc h-Jaeg er (Neus truk tur )/Modul -S trukt ur/O nline -Doku me ntatio n/Umw elt ( --> F ür all e Doku me nte <-- )/Hinwei s e/Hinw ei s - Umwel t - AB B E lektro gerät e @ 19\ mo d_13231 627 458 39_15. docx @ 110 867 @ @ 1
ABB
-Welcome
| — 5 —
All packaging materials and devices from ABB bear the markings and test seals for
proper disposal. Always dispose of the packaging material and electric devices and their
components via an authorized recycling facilities or disposal companies.
ABB products meet the legal requirements, in particular the laws governing electronic
and electrical devices and the REACH ordinance.
(EU-Directive 2002/96/EG WEEE and 2002/95/EG RoHS)
(EU-REACH ordinance and law for the implementation of the ordinance (EG)
No.1907/2006)
ABB
-Welcome
| — 6 —
Pos: 18 /Di nA 4 - A nleitu ngen Onlin e/U ebersc hri ft en/1 ./Bedie nun g @ 18\mod_ 130 261 392 416 5_15.doc x @ 1 033 65 @ 1 @ 1
4 Operation
Pos: 19 /D i nA4 - A nlei tu ngen O nlin e/Ueb ersc hri ft en/2 ./Nor male r Bet rieb @ 18 \mo d_1 302 768 820965_ 15. doc x @ 10 3540 @ 2 @ 1
4.1 Standard operations
Pos: 20 /Di nA 4 - A nleitu ngen Onli ne/ Ueb ersc hrift en/3 ./B edie nele men te @ 20\ mod_13 232 6022 055 9_1 5.do cx @ 1 116 47 @ 3 @ 1
4.1.1 Control elements
Pos: 21 /Di nA 4 - A nleitu ngen O nlin e/In halt/K NX/ Do orEnt ry/83 220 -AP-xx x/Be dienel eme nte - 8322 0-AP -xxx @ 18\ mod_1 3032 128 53605_ 15.d ocx @ 103 673 @ @ 1
Fig. 1 Control elements
ABB
-Welcome
| — 7 —
No. Functions
1 7" Touch screen
2 Communication button
2A For incoming call, press this button within 30 seconds to activate
communication. Press it again to end call.
2B In standby mode, press this button to set up the voice and video
connections to the default outdoor station.
3 Unlock button
3A Press this button to open the door at any time.
3B Auto-unlock: The door is automatically opened after an incoming call.
If the LED lights up, this indicates auto-unlock.
If the LED flashes rapidly, it means the door is open over the set time. (The
sensor must be connected first.)
4 Mute button
4A In standby mode, press this button to mute the ringtone for this indoor
station.
4B In standby mode, hold this button to mute the ringtone for all indoor
stations in the apartment.
4C Press this button to reject incoming call.
4D During a conversation, press this button to mute the microphone.
If the LED lights up, this indicates a mute status.
5 Program button 1
5A Release the lock connected with outdoor station (COM-NC-NO)
(default function)
5B *Programmable for additional functions, e.g. call guard unit,
intercom, etc.
6 Surveillance button
6A In standby mode, press this button to surveil the default outdoor station.
6B When video is on the screen, press this button to snapshot manually.
7 System setting button
Enter the system settings menu for various functions of the device.
*For use of this button, please contact your electrical installer.
ABB
-Welcome
| — 8 —
4.1.2 Welcome screen and status bar
Fig. 2 Welcome screen and status bar
No. Functions
1 Current date
- Click here to set the current date.
2 Time
- Click here to set the current time.
3 System information
- Click on this icon to call up the address (number of the indoor station,
default outdoor station, master or slave station) on this panel and the
current software information.
4 History
- New informations (events or picture memory) are available when this icon
flashes. This also indicates a missed call or a new voice message.
- Click on this icon to display the events and picture memory .
5 Mute function
- Icons "crossed-out handset" and "crossed-out bell" indicate the mute
status of the microphone or the loudspeaker of the panel.
6 Open entrance door
3 9
2
4
65 7 8
10
1
11
12
13
14
ABB
-Welcome
| — 9 —
- The "open door" icon is displayed when you press the door opener or
activate the function "automatic door opener".
7 SD card
- The icon shows whether or not you have inserted an SD card.
8 Switch actuator
- The icon is shown after you activate the switch actuator.
9 Cleaning blockage
- The icon is shown when the display is blocked to prevent functions being
enabled during cleaning.
10 SOS
- Hold this button for 3s to send an SOS signal to a guard unit.
11 Surveillance
- Click on this button to start to survey the default outdoor station.
12 Intercom
- Click on this button to enter the intercom call menu.
13 Guard unit
- Click on this button to call guard unit.
14 Switch actuator
- Click on this button to enter the switch actuator menu.
Pos: 29 /B usch-J aeg er (N eust ruktur )/M odul -Strukt ur/O nline -Doku me ntatio n/St euer mod ule - Onli ne-Dok ume ntati on ( --> Für alle Dok ume nte <- -)/ +++++ +++++ ++ Sei ten umbruch ++++ ++++ +++ + @ 9\m od_126 8898 668 093_0. docx @ 52149 @ @ 1
Pos: 22 /B usch-J aeg er (N eust ruktur )/M odul -Strukt ur/O nline -Doku me ntatio n/St euer mod ule - Onli ne-Dok ume ntati on ( --> Für alle Dok ume nte <- -)/ +++++ +++++ ++ Sei ten umbruch ++++ ++++ +++ + @ 9\m od_126 8898 668 093_0. docx @ 52149 @ @ 1
ABB
-Welcome
| — 10 —
Pos: 26 /Di nA 4 - A nleitu ngen Onli ne/ Ueb ersc hrift en/2 ./B edie nakti onen @ 2 0\m od_ 1323 262294 281 _15. docx @ 11 191 1 @ 2 @ 1
4.2 Control actions
Pos: 27 /Di nA 4 - A nleitu ngen O nlin e/Ueb ersc hrift en/3 ./S prec h- und Videov erbi ndu ng @ 20\mod _13 232 6236 8700_1 5.do cx @ 1119 27 @ 3 @ 1
4.2.1 Surveillance
Pos: 28 /Di nA 4 - A nleitu ngen Onlin e/In halt /KNX /Do orEnt ry/83 220 -AP -xxx/S p rech- u nd Vi deov erbi ndung - 8322 0-A P-xxx @ 20\ mo d_1 3232623 418 52_ 15.d ocx @ 111919 @ @ 1
Fig. 3 Surveillance
Click on this button to start to survey the default outdoor station. Only the video
connection appears first. Press button to activate the voice connection.
No. Function
1 Designation of camera.
2 Set volume with the "plus/minus" buttons.
3 If several outdoor stations or external cameras are connected.
- Select a camera with the “forward/back” buttons
4 Click on the button to set the display.
Saturation of the display (plus and minus).
Contrast of the display (plus and minus).
Pos: 29 /B usch-J aeg er (N eust ruktur )/M odul -Strukt ur/O nline -Doku me ntatio n/St euer mod ule - Onli ne-Dok ume ntati on ( --> Für alle Dok ume nte <- -)/ +++++ +++++ ++ Sei ten umbruch ++++ ++++ +++ + @ 9\m od_126 8898 668 093_0. docx @ 52149 @ @ 1
2
3
4
1
Surveillance
ABB
-Welcome
| — 11 —
Pos: 30 /D i nA4 - A nlei tu ngen O nlin e/Ueb ersc hri ft en/3 ./T uer oeff nen @ 2 0\mo d_1 323 263277 453 _15. docx @ 11 193 5 @ 3 @ 1
4.2.2 Intercom
Pos: 31 /Di nA 4 - A nleitu ngen Onlin e/In halt /KNX /Do orEnt ry /83220 -A P-xxx / Tuer o effne n - 832 20-AP -x xx @ 20\m od_ 132326 795 847 9_15 .docx @ 1 121 09 @ @ 1
Fig. 4 Intercom
Click on this button to enter intercom call menu, and then the following functions are available:
(Set the intercom call lists in the “system setting-intercom setting” menu first.)
No. Functions
1 The name of an intercom.
2 The address of an intercom.
3 The type of an intercom (external or internal).
means an external intercom from a different apartment.
means an internal intercom from the same apartment.
4 Click on “callbutton to make an intercom call.
5 Click on “back” button to return to the Start screen.
4
1
Intercom
5
2 3
ABB
-Welcome
| — 12 —
4.2.3 Calling guard unit
Pos: 31 /Di nA 4 - A nleitu ngen Onlin e/In halt /KNX /Do orEnt ry /83220 -A P-xxx / Tuer o effne n - 832 20-AP -x xx @ 20\m od_ 132326 795 847 9_15 .docx @ 1 121 09 @ @ 1
Fig. 5 Calling guard unit
Click on the "guard unit" button to call a guard unit, and then the following functions are
available:
No. Functions
1 Designation of a guard unit.
2 Set volume with the "plus/minus" buttons.
Call guard unit
2
1
ABB
-Welcome
| — 13 —
4.2.4 Switch actuator
Pos: 31 /Di nA 4 - A nleitu ngen Onlin e/In halt /KNX /Do orEnt ry /83220 -A P-xxx / Tuer o effne n - 832 20-AP -x xx @ 20\m od_ 132326 795 847 9_15 .docx @ 1 121 09 @ @ 1
Fig. 6 Switch actuator
Click on “switch actuator” button to enter the switch actuator menu and then the following
functions are available:
(Set actuator lists in the “system setting-switch actuator” menu first.)
No. Functions
1 The name of an actuator.
2 The address of an actuator.
3 Click on this button to activate the selected actuator.
4 Click on this button to go back to the Start screen.
Switch actuator
4
1 2
3
ABB
-Welcome
| — 14 —
4.2.5 Setting up the voice and video connections
Pos: 31 /Di nA 4 - A nleitu ngen Onlin e/In halt /KNX /Do orEnt ry /83220 -A P-xxx / Tuer o effne n - 832 20-AP -x xx @ 20\m od_ 132326 795 847 9_15 .docx @ 1 121 09 @ @ 1
Fig. 7 Setting up the voice and video connections
The following functions are available for setting up the voice and video connections:
(Press the communication button.)
No. Functions
1 Designation of the camera.
2 Set the volume with the "plus/minus" buttons.
3 If several outdoor stations or external cameras are connected, select the
camera with the “forward/back” buttons.
4 Click on the buttons to set the display.
Saturation of the display (plus and minus).
Contrast of the display (plus and minus).
Pos: 29 /B usch-J aeg er (N eust ruktur )/M odul -Strukt ur/O nline -Doku me ntatio n/St euer mod ule - Onli ne-Dok ume ntati on ( --> Für alle Dok ume nte <- -)/ +++++ +++++ ++ Sei ten umbruch ++++ ++++ +++ + @ 9\m od_126 8898 668 093_0. docx @ 52149 @ @ 1
2
3
4
1
ABB
-Welcome
| — 15 —
4.2.6 Opening the door
Pos: 31 /Di nA 4 - A nleitu ngen Onlin e/In halt /KNX /Do orEnt ry /83220 -A P-xxx / Tuer o effne n - 832 20-AP -x xx @ 20\m od_ 132326 795 847 9_15 .docx @ 1 121 09 @ @ 1
Fig. 8 Opening the door
Press the key button to activate the door opener, and then the following functions
become available:
No. Functions
1 The "open door" icon is displayed after you press the door opener or
activate the function "automatic door opener."
1
ABB
-Welcome
| — 16 —
4.2.7 Muting
Pos: 31 /Di nA 4 - A nleitu ngen Onlin e/In halt /KNX /Do orEnt ry /83220 -A P-xxx / Tuer o effne n - 832 20-AP -x xx @ 20\m od_ 132326 795 847 9_15 .docx @ 1 121 09 @ @ 1
Fig. 9 Muting
The muting menu (mute timer) has the following functions:
No. Functions
1 No call is pending:
If you press the "mute function" while no call is pending, the bell sound of
the panel will be deactivated for a certain period.
- If calls come in during this time, only the video image is displayed.
- Missed calls are displayed in the events and pictures memory .
2 A call is pending:
If you press the button "mute function" during a call, the microphone of the
panel will be deactivated until the button is pressed again.
1 2
ABB
-Welcome
| — 17 —
4.2.8 Activating the custom function
Pos: 31 /Di nA 4 - A nleitu ngen Onlin e/In halt /KNX /Do orEnt ry /83220 -A P-xxx / Tuer o effne n - 832 20-AP -x xx @ 20\m od_ 132326 795 847 9_15 .docx @ 1 121 09 @ @ 1
1 2
3
ABB
-Welcome
| — 18 —
Fig. 10 Activating the custom function
The program button can be configured with different functions, e.g. call to guard unit,
intercom call or control switch actuator. Its default function is the release of the second
lock, which is connected with terminals COM-NC-NO of an outdoor station.
If no function is assigned to the program button, there will be no action after pressing
this program button.
Only the existing intercom call list & switch actuator list can be assigned for the program
button.
No. Functions
1
If the function “release second lock” is assigned to the program button,
the "open door" icon will be displayed when you press the program button.
2 If the function “control switch actuator” is assigned to the program button,
the "actuator" icon will be displayed when you press the program button.
3 If the function “make an intercom call” is assigned to the program button,
the call will be activated directly when you press the program button.
4 If function “call guard unit” is assigned to the program button, the call will
be activated when you press the program button.
4
ABB
-Welcome
| — 19 —
4.2.9 Event and picture memory/history
Pos: 31 /Di nA 4 - A nleitu ngen Onlin e/In halt /KNX /Do orEnt ry /83220 -A P-xxx / Tuer o effne n - 832 20-AP -x xx @ 20\m od_ 132326 795 847 9_15 .docx @ 1 121 09 @ @ 1
Fig. 11 Event and picture memory/history
The panel records all events. Press the "history" button and then the last 100 events will
be displayed (prior events are overwritten).
No. Functions
1 If you have activated the function "auto snapshots activated" in the system
settings, the flashing icon in the status bar signals a newly taken snapshot.
- The symbol stops flashing when you call up the events and pictures
memory.
2 Voice message
- Press the flash button to enter the voice message settings menu.
1 2
ABB
-Welcome
| — 20 —
1 2
2
3
4
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48
  • Page 49 49
  • Page 50 50
  • Page 51 51
  • Page 52 52
  • Page 53 53
  • Page 54 54
  • Page 55 55
  • Page 56 56
  • Page 57 57
  • Page 58 58
  • Page 59 59
  • Page 60 60
  • Page 61 61
  • Page 62 62

ABB Video indoor station M2233x-x User manual

Category
Door intercom systems
Type
User manual
This manual is also suitable for

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI