Fosi Audio BT30C Bluetooth 5.0 Stereo Amplifier 2.1 Channel Class D Audio Power Receiver Amp User guide

Model: BT30C Bluetooth 5.0 Stereo Amplifier 2.1 Channel Class D Audio Power Receiver Amp

1 Please plug the power cord into the amplifier then the wall to avoid

sparkers. (The sparker is caused by wrong use way).

2 Fosi Audio BT30C 2.1 channel Bluetooth amplifier can only drive passive

speakers/subwoofer, not powered speakers/subwoofer.

3 Please plug the audio cables into the amplifier then switch on to avoid

the humming and noise.

4 Bluetooth connection has priority than RCA input. After Bluetooth is

connected, the RCA input won't work. If your device has no sound with

RCA input. please check if the Bluetooth was connected.

5 The Bluetooth input and RCA input of the Fosi Audio BT30C 2.1 channel

Bluetooth amplifier cannot be used at the same time.

6 Please turn the VOL knob to the minimum before power on to avoid

instant loud noise

7 For more troubleshooting, please read the User Guide and contact us.

Model: BT30C Bluetooth 5.0 Stereo Amplifier 2.1 Channel Class D Audio Power Receiver Amp