Kentrol Mirror Relocation Brackets Installation guide

Type
Installation guide
Installation Instructions Installation Instructions
Part No. 30542 & 50542 Part No.30542 & 50542
Mirror Relocation Brackets Mirror Relocation Brackets
Fits 2003-2006 TJ Jeep Fits 2003-2006 TJ Jeep
Carefully remove the two bolts on the lower part of the
windshield hinge. Position and mount the relocation bracket
using the 5/16” bolts provided. Remove the factory mirror
from the door and mount the mirror to the bracket using ¼”-
20nc bolts and nuts provided. Make sure all bolts are securely
tightened. With help adjust the mirrors to your needs. We
recommend that you use anti sieze on all threads of the
stainless bolts provided with your parts.
Note: The relocation brackets are designed for use with
the doors off. The doors will hit the mirror if you try to
drive the Jeep with the doors on. Remove the bottom
plastic from the mirror as it will fall off during use.
Carefully remove the two bolts on the lower part of the
windshield hinge. Position and mount the relocation bracket
using the 5/16” bolts provided. Remove the factory mirror
from the door and mount the mirror to the bracket using ¼”-
20nc bolts and nuts provided. Make sure all bolts are securely
tightened. With help adjust the mirrors to your needs. We
recommend that you use anti sieze on all threads of the
stainless bolts provided with your parts.
Note: The relocation brackets are designed for use with
the doors off. The doors will hit the mirror if you try to
drive the Jeep with the doors on. Remove the bottom
plastic from the mirror as it will fall off during use.
  • Page 1 1

Kentrol Mirror Relocation Brackets Installation guide

Type
Installation guide

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI