2. Kentrol
  3. Stainless Steel Mirror Relocation Bracket

Kentrol Stainless Steel Mirror Relocation Bracket Installation guide

  • Hello! I have analyzed the provided document which contains installation instructions for the Mirror Relocation Brackets, models 30533 and 50533, designed for Jeep YJ models. The document provides step-by-step instructions on how to install the relocation bracket and re-mount the mirrors. I'm ready to answer your questions regarding this specific document or the described product.
  • What should be done with threads of stainless bolts during installation?
    Which Jeep models are compatible with this Mirror Relocation Bracket?
    What parts should be removed from the factory mirror before installing it?
INSTALLATION INSTRUCTIONS
Part Number 30533 & 50533
Mirror Relocation Bracket
Fits 1987-1995 YJ with Half Doors or
1994-1995 with Full Doors
INSTALLATION INSTRUCTIONS
Part Number 30533 & 50533
Mirror Relocation Bracket
Fits 1987-1995 Yj with Half doors or
1994-1995 with Full Doors
With Help remove the two bolts from the front side
of the windshield hinge lower portion. Install the
relocation bracket over the lower half of the
windshield hinge and bolt in place using the stainless
bolts provided. Remove the nut from the bottom of
the factory mirror, then remove the spring and
washer. Install the mirror into the bracket with the
spacer between tabs. Install the factory washer and
nut, then adjust the mirror and tighten securely.
We recommend that you use anti-sieze on all threads
of the stainless bolts provided with your parts.
With Help remove the two bolts from the front side
of the windshield hinge lower portion. Install the
relocation bracket over the lower half of the
windshield hinge and bolt in place using the stainless
bolts provided. Remove the nut from the bottom of
the factory mirror, then remove the spring and
washer. Install the mirror into the bracket with the
spacer between tabs. Install the factory washer and
nut, then adjust the mirror and tighten securely.
We recommend that you use anti-sieze on all threads
of the stainless bolts provided with your parts.
/