2. Ghent
  3. PRS4N7440BCBEFL001

Ghent PRS4N7440BCBEFL001, Prest, PRS1M7440BCBE, PRS1N7440BCBE, PRS4M7440BCBEFL001 Operating instructions

  • Hello! I've reviewed the instruction sheet for the Ghent Prest Mobile Whiteboard. It provides a clear, step-by-step guide on assembling the whiteboard, including attaching the casters, legs, braces, and accessory holder. I'm ready to answer your questions about the assembly process or any other details mentioned in the document.
  • What is included in the package?
    What tool is needed for assembly?
    How is the accessory holder attached?
1/4"-20 X 2" SCREWS WITH WASHERS
(PAGE 1 OF 2)
(2)
Leg
(4)
Caster
(4)
Brace
(1)
Accessory Holder
(6)
1/4-20 x 7/8"
(6)
1/4-20 x 2"
(12)
WASHER
(1)
ALLEN WRENCH
Step 2:
Install the casters on the legs.
Prest Mobile Whiteboard
Instruction Sheet
Step 1:
Remove and unpack the legs, casters, braces, and hardware kit from the packaging, leaving the
whiteboard intact inside the box.
www.ghent.com/install - Lebanon, OH 800-543-0550 IS-PREST (12/19)
(1)
Whiteboard
Step 3:
Install the leg on one side of the whiteboard.
3a. Use the cardboard as a protective work area as you place the whiteboard on its side
3b. Align the legs with the pre-drilled holes on the frame.
3c. Use the screws with washers to attach the legs to the frame, hand tighten with provided allen
wrench.
A
BRACES OVERLAP
1/4"-20 X 7/8" SCREWS WITH WASHERS
Step 5:
Repeat steps 3 and 4 for the opposite side.
Step 6:
Stand the unit upright and attach the accessory holder using the provided magnets.
Step 7:
Recycle all packaging materials in accordance to local regulations.
Step 4:
Install the braces.
4a. Use the screws with washers to attach braces.
4b. Re-tighten all screws with provided wrench.
www.ghent.com/install - Lebanon, OH 800-543-0550 IS-PREST(12/19)
(PAGE 2 OF 2)
/