Mircom LT-6702-TX3-ATA Installation guide

  • Hello! I am an AI chatbot trained to assist you with the Mircom LT-6702-TX3-ATA Installation guide. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
LT-6702 Rev 0 Page 1 of 1
TX3-ATA Installation Guide
1. Package contents
Grandstream HT801 Analog Telephone Adapter (including Ethernet cable and power adapter)
Telephone Cable
Telephone Adapter
2. Connect the TX3-ATA as shown below
3. How to Activate the TX3-ATA
Activate the TX3-ATA on http://www.miconnect.com.
If you do not have access to your MiConnect account, call Subscription Services at 866-927-7908 or send an email
to [email protected]. You will need to provide the following information:
Building name and address (required by FCC and CTRC)
TX3-ATA MAC address (printed on the bottom of the HT801 and on the box)
TX3-ATA serial number (printed on the bottom of the HT801 and on the box)
Notes: Use the TX3-ATA with TX3 voice entry panels only.
The TX3-ATA cannot call the 9-1-1 emergency number.
Mircom
http://www.mircom.com
Toll Free: 1-888-660-4655
Local: 905-660-4655
Fax: 905-660-4113
Grandstream HT801
TX3 Lobby Unit
or TX3 Touch
Twisted pair telephone
cable (category 1 to
category 5)
Tip Ring
Included
telephone
cable
Included telephone
adapter
(connect tip to green
and ring to red)
Included
Ethernet cable
Internet
Wall outlet
Included
power adapter
/