Extron MPS 601 User manual

User Guide

MPS 601

HDMI Switchers

Media Presentation Switcher

68-2454-01 Rev. D

01 19

Safety Instructions

Safety Instructions • English

WARNING: This symbol, ,when used on the product, is

intended to alert the user of the presence of uninsulated dangerous

voltage within the product’s enclosure that may present a risk of electric

shock.

ATTENTION: This symbol, , when used on the product, is intended

to alert the user of important operating and maintenance (servicing)

instructions in the literature provided with the equipment.

For information on safety guidelines, regulatory compliances, EMI/EMF

compatibility, accessibility, and related topics, see the Extron Safety and

Regulatory Compliance Guide, part number 68-290-01, on the Extron

website, www.extron.com.

Sicherheitsanweisungen • Deutsch

WARNUNG: Dieses Symbol auf dem Produkt soll den Benutzer

darauf aufmerksam machen, dass im Inneren des Gehäuses dieses

Produktes gefährliche Spannungen herrschen, die nicht isoliert sind und

die einen elektrischen Schlag verursachen können.

VORSICHT: Dieses Symbol auf dem Produkt soll dem Benutzer in

der im Lieferumfang enthaltenen Dokumentation besonders wichtige

Hinweise zur Bedienung und Wartung (Instandhaltung) geben.

Weitere Informationen über die Sicherheitsrichtlinien, Produkthandhabung,

EMI/EMF-Kompatibilität, Zugänglichkeit und verwandte Themen finden Sie in

den Extron-Richtlinien für Sicherheit und Handhabung (Artikelnummer

68-290-01) auf der Extron-Website, www.extron.com.

Instrucciones de seguridad • Español

ADVERTENCIA: Este símbolo, , cuando se utiliza en el producto,

avisa al usuario de la presencia de voltaje peligroso sin aislar dentro del

producto, lo que puede representar un riesgo de descarga eléctrica.

ATENCIÓN: Este símbolo, , cuando se utiliza en el producto, avisa

al usuario de la presencia de importantes instrucciones de uso y

mantenimiento recogidas en la documentación proporcionada con el

equipo.

Para obtener información sobre directrices de seguridad, cumplimiento

de normativas, compatibilidad electromagnética, accesibilidad y temas

relacionados, consulte la Guía de cumplimiento de normativas y seguridad

de Extron, referencia 68-290-01, en el sitio Web de Extron, www.extron.com.

Instructions de sécurité • Français

AVERTISSEMENT : Ce pictogramme, , lorsqu’il est utilisé sur le

produit, signale à l’utilisateur la présence à l’intérieur du boîtier du

produit d’une tension électrique dangereuse susceptible de provoquer

un choc électrique.

ATTENTION : Ce pictogramme, , lorsqu’il est utilisé sur le produit,

signale à l’utilisateur des instructions d’utilisation ou de maintenance

importantes qui se trouvent dans la documentation fournie avec le

matériel.

Pour en savoir plus sur les règles de sécurité, la conformité à la

réglementation, la compatibilité EMI/EMF, l’accessibilité, et autres sujets

connexes, lisez les informations de sécurité et de conformité Extron, réf.

68-290-01, sur le site Extron, www.extron.com.

Istruzioni di sicurezza • Italiano

AVVERTENZA: Il simbolo, , se usato sul prodotto, serve ad

avvertire l’utente della presenza di tensione non isolata pericolosa

all’interno del contenitore del prodotto che può costituire un rischio di

scosse elettriche.

ATTENTZIONE: Il simbolo, , se usato sul prodotto, serve ad

avvertire l’utente della presenza di importanti istruzioni di funzionamento

e manutenzione nella documentazione fornita con l’apparecchio.

Per informazioni su parametri di sicurezza, conformità alle normative,

compatibilità EMI/EMF, accessibilità e argomenti simili, fare riferimento

alla Guida alla conformità normativa e di sicurezza di Extron, cod. articolo

68-290-01, sul sito web di Extron, www.extron.com.

Instrukcje bezpieczeństwa • Polska

OSTRZEŻENIE: Ten symbol, , gdy używany na produkt, ma na celu

poinformować użytkownika o obecności izolowanego i niebezpiecznego

napięcia wewnątrz obudowy produktu, który może stanowić zagrożenie

porażenia prądem elektrycznym.

UWAGI: Ten symbol, , gdy używany na produkt, jest przeznaczony do

ostrzegania użytkownika ważne operacyjne oraz instrukcje konserwacji

(obsługi) w literaturze, wyposażone w sprzęt.

Informacji na temat wytycznych w sprawie bezpieczeństwa, regulacji

wzajemnej zgodności, zgodność EMI/EMF, dostępności i Tematy pokrewne,

zobacz Extron bezpieczeństwa i regulacyjnego zgodności przewodnik, część

numer 68-290-01, na stronie internetowej Extron, www.extron.com.

Инструкция по технике безопасности • Русский

ПРЕДУПРЕЖДЕНИЕ: Д а нны й си м в о л, , е сли ук азан

на прод ук те, пре д упреж д а ет поль зов ателя о нали чи и

неи золи ров анного опасного напряж ени я в нутри к орпуса

прод ук та, к оторое мож ет при в ести к пораж ени ю

электрическим током.

ВНИМАНИЕ: Д а нны й си м в о л, , если ук а зан на прод ук те,

пр е д упре ж д ае т поль зов ате ля о на ли чи и в аж ны х и нструк ци й

по эк сплуа таци и и об служ и в а ни ю в р ук ов од ств е,

при лагаемом к д анном у оборуд ов ани ю .

Для получения информации о правилах техники безопасности,

со б лю д е ни и но р м а ти в ны х тр е б о в а ни й , эле к тр о м а гни тно й

сов мести м ости (Э М П/ Э Д С), в озмож ности д оступа и д руги х

в опросах см . рук ов од ств о по безопасности и соблю д ени ю

норм а ти в ны х тре б ов ани й E xtr on на сай те E xtr on: ,

www.extron.com, ном е р по к аталогу - 68 -29 0-01 .

安全说明 • 简体中文

警告：产品上的这个标志意在警告用户该产品机壳内有暴露的危险电压，

有触电危险。

注意：产品上的这个标志意在提示用户设备随附的用户手册中有

重要的操作和维护(维修）说明。

关于我们产品的安全指南、遵循的规范、EMI/EMF 的兼容性、无障碍

使用的特性等相关内容，敬请访问 Extron 网站 , www.extron.com，参见

Extron 安全规范指南，产品编号 68-290-01

。

안전 지침 • 한국어

경고: 이 기호 가 제품에 사용될 경우, 제품의 인클로저 내에 있는

접지되지 않은 위험한 전류로 인해 사용자가 감전될 위험이 있음을

경고합니다.

주의: 이 기호 가 제품에 사용될 경우, 장비와 함께 제공된 책자에 나와

있는 주요 운영 및 유지보수(정비) 지침을 경고합니다.

안전 가이드라인, 규제 준수, EMI/EMF 호환성, 접근성, 그리고 관련 항목에

대한 자세한 내용은 Extron 웹 사이트(www.extron.com)의 Extron 안전 및

규제 준수 안내서, 68-290-01 조항을 참조하십시오.

安全記事 • 繁體中文

警告: 若產品上使用此符號，是為了提醒使用者，產品機殼內存在著

可能會導致觸電之風險的未絕緣危險電壓。

注意若產品上使用此符號，是為了提醒使用者，設備隨附的用戶手冊中有

重要的操作和維護（維修）説明。

有關安全性指導方針、法規遵守、EMI/EMF 相容性、存取範圍和相關主題的詳細資

訊，請瀏覽 Extron 網站：www.extron.com，然後參閱《Extron 安全性與法規

遵守手冊》，準則編號 68-290-01。

安全上のご注意 • 日本語

警告: この記号が製品上に表示されている場合は、筐体内に絶縁されて

いない高電圧が流れ、感電の危険があることを示しています。

注意:この記号が製品上に表示されている場合は、本機の取扱説明書に

記載されている重要な操作と保守(整備)の指示についてユーザーの注意

を喚起するものです。

安全上のご注意、法規厳守、EMI/EMF適合性、その他の関連項目に

ついては、エクストロンのウェブサイト www.extron.com より『 Extron Safety

and Regulatory Compliance Guide』 ( P/N 68-290-01) をご覧ください。

Copyright

Trademarks

All trademarks mentioned in this guide are the properties of their respective owners.

The following registered trademarks (

®

), registered service marks (

SM

), and trademarks (

TM

) are the property of RGBSystems, Inc. or

ExtronElectronics (see the current list of trademarks on the Terms of Use page at www.extron.com):

Registered Trademarks

(

®

)

Extron, Cable Cubby, ControlScript, CrossPoint, DTP, eBUS, EDID Manager, EDID Minder, Flat Field, FlexOS, Glitch Free. Global

Configurator, GlobalScripter, GlobalViewer, Hideaway, HyperLane, IPIntercom, IPLink, KeyMinder, LinkLicense, LockIt, MediaLink,

MediaPort, NetPA, PlenumVault, PoleVault, PowerCage, PURE3, Quantum, Show Me, SoundField, SpeedMount, SpeedSwitch,

StudioStation, SystemINTEGRATOR, TeamWork, TouchLink, V-Lock, VideoLounge, VN-Matrix, VoiceLift, WallVault, WindoWall, XTP,

XTPSystems, and ZipClip

Registered Service Mark

(SM)

: S3 Service Support Solutions

Trademarks

(

™

)

AAP, AFL (Accu-RateFrameLock), ADSP(Advanced Digital Sync Processing), Auto-Image, AVEdge, CableCover, CDRS(ClassD

Ripple Suppression), Codec Connect, DDSP(Digital Display Sync Processing), DMI (DynamicMotionInterpolation), DriverConfigurator,

DSPConfigurator, DSVP(Digital Sync Validation Processing), eLink, EQIP, Everlast, FastBite, FOX, FOXBOX, IP Intercom HelpDesk,

MAAP, MicroDigital, Opti-Torque, PendantConnect, ProDSP, QS-FPC(QuickSwitch Front Panel Controller), RoomAgent, Scope-Trigger,

ShareLink, SIS, SimpleInstructionSet, Skew-Free, SpeedNav, Triple-Action Switching, True4K, Vector™ 4K , WebShare, XTRA, and

ZipCaddy

FCC Class A Notice

This equipment has been tested and found to comply with the limits for a Class A digital

device, pursuant to part15 of the FCC rules. The ClassA limits provide reasonable

protection against harmful interference when the equipment is operated in a commercial

environment. This equipment generates, uses, and can radiate radio frequency energy

and, if not installed and used in accordance with the instruction manual, may cause

harmful interference to radio communications. Operation of this equipment in a

residential area is likely to cause interference. This interference must be corrected at the

expense of the user.

NOTE: For more information on safety guidelines, regulatory compliances, EMI/

EMF compatibility, accessibility, and related topics, see the Extron Safety and

Regulatory Compliance Guide on the Extron website.

VCCI-A Notice

この装置は、クラスＡ情報技術装置です。この装置を家庭環境で使用すると、電波妨害を引き

起こすことがあります。その場合には使用者が適切な対策を講ずるよう要求されることがあります。

ＶＣＣI－Ａ

Conventions Used in this Guide

Notifications

The following notifications are used in this guide:

CAUTION: Risk of minor personal injury.

ATTENTION : Risque de blessuremineure.

ATTENTION:

• Risk of property damage.

• Risque de dommages matériels.

NOTE: A note draws attention to important information.

TIP: A tip provides a suggestion to make working with the application easier.

Software Commands

Commands are written in the fonts shown here:

^AR Merge Scene,,0p1 scene 1,1 ^B 51 ^W^C.0

[01] R 0004 00300 00400 00800 00600 [02] 35 [17] [03]

E X! *X1&* X2)* X2#* X2! CE}

NOTE: For commands and examples of computer or device responses used in

this guide, the character “0” is used for the number zero and “O” is the capital

letter “o.”

Computer responses and directory paths that do not have variables are written in the

font shown here:

Reply from 208.132.180.48: bytes=32 times=2ms TTL=32

C:\Program Files\Extron

Variables are written in slanted form as shown here:

ping xxx.xxx.xxx.xxx —t

SOH R Data STX Command ETB ETX

Selectable items, such as menu names, menu options, buttons, tabs, and field names

are written in the font shown here:

From the File menu, select New.

Click the OK button.

Specifications Availability

Product specifications are available on the Extron website, www.extron.com.

Extron Glossary of Terms

A glossary of terms is available at http://www.extron.com/technology/glossary.aspx.

Contents

Introduction ...............................................1

About this User Guide ......................................... 1

About the MPS601 ............................................. 1

Features .............................................................. 2

Installation .................................................4

Mounting the Switcher ......................................... 4

Connections ........................................................ 4

Power and Input .............................................. 5

Output ............................................................. 6

Control Devices ............................................... 6

Contact Closure and Tally Output Application

Diagrams ............................................................ 7

LockIt HDMI Cable Lacing Bracket ...................... 9

Cabling the MPS601 Switcher .......................... 10

Operation .................................................11

Front Panel Features .......................................... 11

HDCP ................................................................ 12

Audio Modes ..................................................... 12

Mode 1 (Default) ............................................ 12

Mode 2 .............................................................. 13

Mode 3 .............................................................. 13

Autodetect for Audio ...................................... 14

Auto-input Switching ......................................... 14

Front Panel Lockout (Executive Mode) ............... 14

Reset Mode ....................................................... 14

EDID Minder ...................................................... 15

Automatic Mode ............................................ 15

User Assigned EDID Mode ........................... 16

Conﬁguration Software ............................18

Installing the Software ........................................ 18

Starting the Software ......................................... 19

Device Discovery Panel .................................. 20

Ofﬂine Device Preview .................................... 21

Using the Software and Device Menus .............. 22

Device Menu.................................................. 22

Software Menu .............................................. 26

Navigating the PCS Application ......................... 28

AV Controls Panel .......................................... 28

Conﬁguration Pages .......................................... 28

Input/Output Conﬁguration ............................ 29

EDID Minder Page ......................................... 30

Image Settings Page...................................... 33

Audio Conﬁg Page ......................................... 34

General Settings Page ................................... 35

Remote Communication and Control .......37

Connection Options ........................................... 37

Remote Control Port (RS-232) ....................... 37

Front Panel Conﬁguration Port ....................... 38

Host-to-MPS Communications .......................... 39

MPS Switcher-initiated Messages .................. 39

MPS Switcher Error Responses ..................... 40

Command and Response Table ......................... 40

Using the Command and Response Table ..... 40

Reference Information ............................. 46

Mounting Options .............................................. 46

UL Rack Mounting Guidelines ........................ 46

RackMounting .............................................. 47

Table or WallMounting ................................... 47

DataViewer ........................................................ 48

Updating Firmware ............................................ 49

viiMPS 601 • Contents

MPS 601 • Contents viii

Introduction

This section describes this guide and features of the MPS601, including:

• About this User Guide

• About the MPS601

• Features

About this User Guide

This guide contains information to install, configure, and operate the Extron MPS601 Media

Presentation Switcher.

In this guide, the MPS601is referred to interchangeably as “MPS,” “MPS601,” or

“switcher.”

About the MPS601

The Extron MPS 601 is a compact six input, one-output media presentation switcher for

digital and analog sources. It offers four HDCP-compliant HDMI inputs and two RGB video

inputs with analog stereo audio. RGB video and analog audio are digitized and switched

through the HDMI output. The MPS 601 features two Extron-exclusive technologies: EDID

Minder, which maintains continuous EDID communication between connected devices and

Key Minder, which continuously authenticates and maintains HDCP encryption between

input and output devices, to ensure quick and reliable switching. The MPS 601 is ideal for

applications that require routing digital and analog sources to a single display.

Figure 1. MPS601 Application Diagram

1

MPS601 • Introduction 1

Features

• Supports computer and video resolutions up to 4K — Resolutions up to

4096x2160/30 with 4:4:4 chroma sampling at 8 bits of color, including 1080p/60 and 2K.

NOTE: 4K60 video at 4:2:0 chroma sampling is not supported.

• Presentation System Integration — Integrates HDMI, RGB, and audio sources into

presentation systems.

• Inputs — Includes four female HDMI and two female 15-pin HD connectors for video;

two female 3.5 mm TRS connectors for analog audio.

• Output — Includes one female HDMI connector.

• Four HDMI inputs and two RGB inputs — Provides switching between HDMI and

analog video sources.

• Digitizes analog video and audio signals — Provides a single video format and

cable connection to the display.

• HDMI audio embedding — Embeds analog input audio signals onto the HDMI output

signal.

• EDID Minder — Automatically manages EDID communication between connected

devices ensuring that all sources power up properly and reliably output content for

display.

• Key Minder — Continuously verifies HDCP compliance for quick, reliable switching.

• Support for computer-video to 1920x1200, including HDTV 1080p60 Hz and 2K.

• Supported HDMI specification features — Include data rates up to 6.75 Gbps,

Deep Color up to 12-bit, 3D, Lip Sync, and HD lossless audio formats.

• HDCP authentication and signal presence LED indicators — Front panel LED

indicators provide real-time feedback and monitoring of key performance parameters.

• HDMI to DVI interface format correction — Automatically reformats HDMI source

signals for output to a connected DVI display.

• Automatic input cable equalization to 50 feet (15 meters) at 1080p 60Hz with

8-bit color when used with Extron HDMI Pro Series cable — Actively conditions

incoming HDMI signals to compensate for signal loss when using long cables, low

quality cables, or source devices with poor HDMI signal output.

• Control for video and audio muting — Mutes video and audio signals by external

contact closure or RS-232 control.

• Audio input assignment — Provides integration flexibiity. In normal operation, the

analog audio inputs follow the corresponding RGB input. Alternatively, they can be

assigned to follow preset groups of RGB and digital inputs. Grouped inputs can share

a common analog audio input. The HDMI output can be set to pass incoming digital

audio, embed the analog audio, or automatically embed the analog audio when no

digital audio is detected.

• Powers on the HDMI output — Provides +5 VDC, 200 mA.

• Front panel security lockout — Prevents unauthorized use in non-secure

environments. In lockout mode, a special button combination is required to operate the

switcher from the front panel controller.

• Extron Product Configuration Software (PCS)— Can conveniently configure

multiple products using a single software application.

• Multiple control options — Includes front panel, RS-232, contact closure, and

auto-input switching.

• Auto-input switching — Switches to the highest- or lowest-numbered input

(selectable) with an active video signal.

MPS601 • Introduction 2

• RS-232 control port — Enables the use of serial commands for complete control and

configuration via the Extron Windows

®

-based control program when integrated into a

control system. Extron products use the Simple Instruction Set (SIS) protocol, a set of

basic ASCII code commands that allow quick and easy programming.

• Contact closure remote control with tally output — Used for remote selection of

an input channel. +5 VDC is provided to light an LED to indicate the current input.

• Rack-mountable, 1U, half rack width metal enclosure.

• LockIt HDMI Cable Lacing Brackets.

• Energy-efficient external universal power supply — Provides worldwide

compatibility, low power consumption, and reduced operating costs.

MPS601 • Introduction 3

Installation

This section describes the installation and the operation of the MPS601, including:

• Mounting the Switcher

• Connections

• Contact Closure and Tally Output Application Diagrams

• LockIt HDMI Cable Lacing Bracket

• Cabling the MPS601 Switcher

Mounting the Switcher

The MPS601 is housed in a 1U, full rack widerack-mountable metal enclosure. The

switchercan also be surface-mounted under a table, desk, or podium, or on a wall.

See Mounting Options on page46 for additionalmounting details.

Connections

0.5 A MAX

POWER

12V

1

2

B

A

3

4

5

6

INPUTS

MPS 601

CONTACT IN / TALLY OUT

HDMI

RGBHV

HDMI

RS-232

GC

135

246

TTCG TCG

GCT TCG T

+V

CG

Tx Rx G

OUTPUT

REMOTE

$$%%&&''(()

)*

*

++

Figure 2. MPS601 Rear Panel

Power and Input Connections Output Connection Control Device Connections

A

DC power connector

B

Two configurable analog

15-pin HD (VGA) connectors

C

Two female 3.5 mm TRS

connectors — (lettered A and B

on the rear panel) corresponding

to the two RGBHV video inputs

D

Four female HDMI connectors

— for HDMI compliant audio and

video input (numbered 3, 4, 5,

and 6 on the rear panel)

E

One female HDMI connector

F

Contact In/Tally Out — Six

3.5mm, 3-pole captive screw

connectors for automatic input

switching and tally indication

using Extron Show Me cables

G

+V Port — 3-pole 3.5mm

captive screw connector for +V

output

H

RS-232 — 3-pole, 3.5mm

captive screw connector

2

MPS601 • Installation 4

Power and Input

A

DC power — Connect to standard AC power: 100 to 240 VAC, at 50 or 60 Hz.

Ground

+12 VDC input

G

External Power Suppl

y

(12 VDC, 0.5 A max.)

Ground all

Devices

DC Power Cord

Captive Screw

Connector

3/16"

(5 mm) Max.

Figure 3. Power Supply Wiring

ATTENTION:

• Always use a power supply provided by or speciﬁed by Extron. Use of an unauthorized

power supply voids all regulatory compliance certiﬁcation and may cause damage to the

supply and the end product.

• Utilisez toujours une source d’alimentation fournie ou recommandée par Extron.

L’utilisation d’une source d’alimentation non autorisée annule toute conformité

réglementaire et peut endommager la source d’alimentation ainsi que le produit ﬁnal.

• Unless otherwise stated, the AC/DC adapters are not suitable for use in air handling

spaces or in wall cavities. The power supply is to be located within the same vicinity as

the Extron AV processing equipment in an ordinary location, Pollution Degree 2, secured

to the equipment rack within the dedicated closet, podium, or desk.

• Sauf mention contraire, les adaptateurs AC/DC ne sont pas appropriés pour une

utilisation dans les espaces d’aération ou dans les cavités murales. La source

d’alimentation doit être située à proximité de l’équipement de traitement audiovisuel

dans un endroit ordinaire, avec un degré2 de pollution, ﬁxé à un équipement de rack à

l’intérieur d’un placard, d’une estrade, ou d’un bureau.

• The installation must always be in accordance with the applicable provisions of National

Electrical Code ANSI/NFPA 70, article 725 and the Canadian Electrical Code part 1,

section 16. The power supply shall not be permanently ﬁxed to building structure or

similar structure.

• Cette installation doit toujours être en accord avec les mesures qui s’applique au

National Electrical Code ANSI/NFPA70, article725, et au Canadian Electrical Code,

partie1, section16. La source d’alimentation ne devra pas être ﬁxée de façon

permanente à une structure de bâtiment ou à une structure similaire.

• This product is intended for use with a UL Listed power source marked Class 2

or LPS and rated 12VDC, minimum 0.5 A.

• Ce produit est destiné à une utilisation avec une source d’alimentation certifiée

UL de classe 2 ou LPS et calibrée à 12 Vcc, 0,5 A minimum.

B

RGBHV video inputs — Two female 15-pin HD connectors for VGA input (numbered 1

and 2 on the rear panel). The connectors accept analog VGA signals.

NOTE: The MPS601 digitizes the RGBHV input signal. It does not scale or convert

video to a different resolution. The output signal resolution is the same as the input

resolution.

C

Analog audio inputs — Two female 3.5 mm TRS connectors for analog audio input.

By default, input A is associated with RGBHV video input 1, and input B is associated

with RGBHV video input 2. The analog input signal is digitized and embedded onto

the HDMI output. For additional audio input switching modes see Audio Modes on

page12.

3

MPS601 • Installation

5

D

HDMI video inputs — Four female HDMI connectors for HDMI compliant audio and

video input (numbered 3 through 6 on the rear panel). Connect an HDMI source device

using standard HDMI cables.

Output

E

HDMI video output — Connect an HDMI display device for output from the selected

input.

Control Devices

F

Contact In and Tally Out — Six 3.5 mm, 3-pole captive screw connectors for

automatic input switching and tally indication using Extron Show Me cables.

When a connected contact is grounded, the corresponding input is selected. At the

same time, the tally output closes causing the Show Me LED on the connected cable to

light (see Contact Closure and Tally Output Application Diagrams on page7).

NOTE: For Show Me cables, the ground pin connection is optional.

The six contacts are mutually exclusive so that only one

Ground (G)

Ta lly (NO)

Contact (NO)

TC G

Do not tin

the wires!

input is selected at a time (see the image on the right

showing Contact In and Tally Out connector wiring).

NOTE: Do not tin the leads. Tinned wires are not as

secure in the connector and could be pulled out.

G

+V Port — 3-pole, 3.5 mm captive screw connector. The

+V

Do not tin

the wires!

three pins constantly output +5 VDC, 200mA total

(shared between pins) to provide power for external tally

LEDs (see the image on the right showing +V connector

wiring).

NOTE: Do not connect “Show Me” cables to the +V

power connectors.

H

RS-232 remote — 3-pole, 3.5 mm captive screw

Ground ( _ )

Receive (Rx)

Transmit (Tx)

Bidirectional

RS-232

Device

Ground ( _ )

Receive (Rx)

Transmit (Tx)

RxTx

Do not tin

the wires!

connector for a host computer or a controller using

Simple Instruction Set (SIS) commands or the PCS

software (see the image on the right showing RS-232

connector wiring).

An IP Link driver allows Extron IPL and MediaLink

devices to control the MPS601 from the RS-232

remote connector.

c

USB configuration port (front panel) — (see Front Panel Features on page11)

Female USB mini B jack used for configuration of the switcher and firmware upgrades

(see Updating Firmware on page49).

MPS601 • Installation

6

Contact Closure and Tally Output Application Diagrams

The following diagrams show examples of various connections using the contact enclosure

and tally output feature of the MPS601.

-- A MAX

POWER

12V

1

2

B

A

3

4

5

6

INPUTS

MPS 601

CONTACT IN / TALLY OUT

HDMI

RGBHV

HDMI

RS-232

GC

135

246

TTCG TCG

GCT TCG T

+V

CG

Tx Rx G

OUTPUT

REMOTE

VGA/HDMI “Show Me” Cables

MPS 601

Display

Contact

Closure

and Tally

HDMI Video and

Embedded Audio

Figure 4. Contact Closure Application Diagram with Show Me Cables

-- A MAX

POWER

12V

1

2

B

A

3

4

5

6

INPUTS

MPS 601

CONTACT IN / TALLY OUT

HDMI

RGBHV

HDMI

RS-232

GC

135

246

TTCG TCG

GCT TCG T

+V

CG

Tx Rx G

OUTPUT

REMOTE

MPS 601

Tally

Contact Closure

Power Supply

12V 1A

Display

HDMI Video and

Embedded Audio

Laptop 1

Video 1

Audio A

Video 2

Audio B

Blu-ray Player

Laptop 2

Audio

Video

Audio

Video

Tally

Contact Closure

Blu-ray Player

CCR 4BLB

PWR

+ G

INPUTS

1 2 G 3 4 G

OUTPUTS

1 2 G 3 4 G

STANDBY/ON

PQLSHDMI OPEN/CLOSE FL OFF

USB

STANDBY/ON

PQLSHDMI OPEN/CLOSE FL OFF

USB

1324

Figure 5. Contact Closure Application Diagram with CCR 4BLB

4

5

MPS601 • Installation

7

-- A MAX

POWER

12V

1

2

B

A

3

4

5

6

INPUTS

MPS 601

CONTACT IN / TALLY OUT

HDMI

RGBHV

HDMI

RS-232

GC

135

246

TTCG TCG

GCT TCG T

+V

CG

Tx Rx G

OUTPUT

REMOTE

Display

HDMI Video and

Embedded Audio

Video

Audio

Video

Audio

CCR 306

Cable Cubby 800

Figure 6. Contact Closure Application Diagram with CCR 306

-- A MAX

POWER

12V

1

2

B

A

3

4

5

6

INPUTS

MPS 601

CONTACT IN / TALLY OUT

HDMI

RGBHV

HDMI

RS-232

GC

135

246

TTCG TCG

GCT TCG T

+V

CG

Tx Rx G

OUTPUT

REMOTE

Two Contact Closure Switch AAP

PC

Solder Cups

Normally

Closed (NC)

Normally

Open (NO)

Common

Ground (C)

LED (-)

LED (+)

MPS 601

Resistor (R)

NOTE: Determine and select the appropriate current-limiting resistor, if needed. Many

button switches have the resistor built in.

Figure 7. Contact Closure Application Diagram with Two Contact Closure

Switch

6

7

MPS601 • Installation

8

LockIt HDMI Cable Lacing Bracket

The included LockIt lacing brackets secure the HDMI cables to the rear panel connectors

as shown in figure8, below. The configuration of the HDMI connectors and supporting

fasteners on the MPS601 rear panel require using a top mount (HDMI output, see figure9,

Top) and a stacked side mount (HDMI inputs 3 and 4, and inputs5and6) installation to

secure the four inputs and single output.

To secure a single HDMI cable in HDMI inputs 3 and 5:

1. Loosen the HDMI connection mounting screw from the panel enough to allow LockIt

lacing bracket placement (see figure8,

1

).

ATTENTION:

• Do not remove the HDMI connection mounting screw.

• Ne retirez pas la vis de montage de la connexion HDMI.

• Do not overtighten the HDMI connector mounting screw. The shield it fastens to

is very thin and can easily be stripped.

• Ne serrez pas trop la vis de montage du connecteur HDMI. Le blindage auquel

elle est attachée est très ﬁn et peut facilement être dénudé.

2. Plug the HDMI cable into the panel connection (

2

).

3. Place the LockIt lacing bracket on the screw and against the HDMI connector (

3

), then

tighten the screw to secure the bracket.

4. Loosely place the included tie wrap around the HDMI connector and LockIt lacing

bracket (

4

). Hold the connector securely against the lacing bracket and tighten the tie

wrap, then remove excess length.

To secure two HDMI cables in HDMI inputs 3 and 4 or inputs 5 and 6:

1. Loosen the HDMI connection mounting screw from the panel near HDMI input 4

enough to allow LockIt lacing bracket placement.

2. Insert both HDMI cables into the panel.

3. Use a single LockIt lacing bracket to the side of the cable.

4. Secure both with the tie wrap as shown in the stacked configuration in figure8.

4

3

2

3

Side Stacked

3

Top

HDMI

1

2

3

4

Figure 8. Lockit Lacing Bracket Installation

A single LockIt bracket can be used to secure two HDMI connectors in a stacked

configuration as shown in figure 9.

4

3

2

3

Side Stacked

3

Top

HDMI

1

2

3

4

Figure 9. Lockit Lacing Bracket Examples

8

9

MPS601 • Installation

9

Cabling the MPS601 Switcher

The switcher can be connected to asmany as six input devices (RGBHV and HDMI). It can

output to one HDMI device or display. Follow the steps below and the installation example

(see figure1 on page1).

1. Turn off power to the switcher and all devices that will be connected to it.

2. Mount the switcher (see Mounting Options on page46).

3. Attach up to two analog RGBHV, and four HDMI (or DVI-D with appropriate adapters)

sources (see Connections on page4).

4. Connect the HDMI output to a compatible display device (see Connections).

5. For analog audio input, connect audio sources to the audio inputs corresponding to the

RGBHV video inputs (see Connections).

6. Connect a control PC or control device to the switcher using:

a. The rear panel RS-232 port and a 3-pole captive screw connector (see Remote

Control Port (RS-232) on page37).

b. The front panel USB configuration port (see Front Panel Configuration Port on

page38).

7. Power up the input and output devices, then connect power to the rear AC connector

of the switcher.

MPS601 • Installation

10

Operation

This section discusses how to configure and operate the MPS601. Topics that are covered

include:

• Front Panel Features

• HDCP

• Audio Modes

• Auto-input Switching

• Front Panel Lockout (Executive Mode)

• Reset Mode

• EDID Minder

Front Panel Features

MPS 601

MEDIA PRESENTATION SWITCHER

CONFIG

SIGNAL

INPUTS

OUTPUT

12 3 45 6

HDCP

1 2 3 4 5 6

AUTO

SWITCH

$$%%&

&'

'(()

)*

*

Figure 10. MPS601 Front Panel

A

Auto Switch LED — This LED lights when auto-input switching is active.

B

Config connector — One female USB mini B port connects a host computer for

configuring the switcher and upgrading firmware.

C

Input switching buttons — Six buttons with associated green LEDs. Press an input

button to switch an input to the HDMI output. Only one of the six inputs can be selected

at a time.

D

Input signal LEDs — Six green LEDs:

• The LEDs for RGB inputs 1 and 2 light when horizontal sync is detected on the

input.

• The LEDs for HDMI inputs 3 to 6 light when TMDS clock activity is detected on the

input.

NOTE: If a connected HDMI source is HDCP encrypted, the HDMI signal LED

does not light until HDCP is authenticated. If HDCP authorization is disabled, the

switcher does not display content with HDCP encryption.

E

Output signal LED — This LED lights when the HDMI output is connected to a display

or sink device.

F

HDCP input signal LEDs (inputs 3, 4, 5, and 6) — These LEDs light when the

connected source device signal is HDCP encrypted.

G

HDCP output LED — This LED lights when the signal from the currently selected input

source is HDCP encrypted and the connected output device (sink) is authenticated.

10

MPS601 • Operation 11

HDCP

The HDMI group is HDCP compliant. When EDID Minder is enabled (default), HDCP is not

supported if adapters are used to provide DVI inputs.

HDCP communication occurs between the selected input source and the output device

directly (pass-though).

Audio Modes

There are three audio modes to customize switching the digital and analog audio inputs

to the output. They are selectable using SIS commands (see Audio input mode on

page42) or the PCS software (see Audio Config Page on page34).

NOTES:

• For a 4K source connected to inputs 3 through 6, analog audio can not be

substituted for embedded audio.

• When embedded audio for a 4K source is muted via PCS or SIS command, the

corresponding 4K video is also muted.

• When video for a 4K source is muted via PCS or SIS command, the corresponding

embedded audio is also muted.

Mode 1 (Default)

When each RGBHV input has an associated audio input, the associated audio input follows

the selected input.

• Audio input A follows input 1 (yellow box in figure11).

Input 1 selected: RGBHV 1 video and audio input A switch to the HDMI output.

• Audio input B follows input 2 (green box in figure11).

Input 2 selected: RGBHV 2 video and audio input B switch to the HDMI output.

• Inputs 3 through 6 selected: the associated embedded audio switches to the output.

0.5A MAX

POWER

12V

1

2

B

A

3

4

5

6

INPUTS

MPS 601

CONTACT IN / TALLY OUT

HDMI

RGBHV

HDMI

RS-232

GC

135

246

TTCG TCG

GCT TCG T

+V

CG

Tx Rx G

OUTPUT

REMOTE

STANDBY/ON

PQLSHDMI OPEN/CLOSE FL OFF

USB

HDMI

Audio

RGBHV

Audio

RGBHV

Laptop with VGA Output

PC with VGA Output

Blu-ray Player

Flat Panel Display with Speakers

Laptop with

HDMI Output

Laptop with

HDMI Output

Laptop with

HDMI Output

Extron

MPS 601

Media Presentation

Switcher

Figure 11. Audio Mode 1 Switching (Default)

11

MPS601 • Operation 12

Page is loading ...

Extron MPS 601 User manual

Extron MPS 601 User manual

Related papers

Other documents