2. ITC
  3. 2319X-XX Whisper Latch

ITC 2319X-XX Whisper Latch User manual

  • Hello! I've reviewed the provided installation instructions for the ITC Whisper Latch, model 2319X-XX. This document details the steps to install the latch, including the necessary tools and safety precautions. I am ready to answer your questions about the installation process or the product features, like the self-latching lever on the 23199 model.
  • What tool is needed to drill the hole for installation?
    Is there anything I should do before starting the installation?
    Which models include a self-latching lever?
3030 Corporate Grove Dr.
Hudsonville, MI 49426
Phone: 616.396.1355
itc-us.com
For warranty information please visit www.itc-us.com/warranty-return-policy
DOC #: 710-00205 • Rev B • 01/31/2023
PARTS/TOOLS NEEDED:
Whisper Latch Assembly 1” Spade Bit
(Not Provided)
Power Drill
(Not Provided)
IMPORTANT SAFETY INSTRUCTIONS. READ CAREFULLY FOR YOUR PROTECTION AND SAVE ALL INSTRUCTIONS.
• Disconnect power before installing, adding or changing any component.
• To avoid a hazard to children, account for all parts and destroy all packing materials.
• It is recommended that fuse protection be added to the positive (+) input.
• Note: The 23199 (shown above) will contain a self latching lever that holds the door in place even when the lock is not engaged. The
23190 and 23193 do not include this lever.
2. Push the round knob through the hole and attach the
latch assembly with the black shim to the door using
the screws provided.
INSTALLATION INSTRUCTIONS
Whisper Latch
Part#: 2319X-XX
Page 1 of 1
1. Determine the installation location and drill a 1” hole
using a spade bit. Mark the location for the mounting
screws and pre-drill. Insert the round collar into the
hole.
3. Determine the installation location for the latch. Mark
the location and secure the latch via screws.
3. Push the switch to ensure latch is in working order.
/