KitSound KSFRESHPIEU User manual

Category
Mobile device dock stations
Type
User manual

This manual is also suitable for

1 1
kitsound.co.uk
JB. 2754 / Made in China. © KitSound
2013 Christchurch, Dorset. BH23 4FL
USER MANUAL
FRESH
CLOCK RADIO
SPEAKER DOCK
2 3
We are craftspeople. We are musicians. We are KitSound
And we all commit ourselves to achieving one shared goal: Bringing
people closer to their music. By truly understanding music we stay true
to its craft. Pure, rich, incredible sound. We’ll settle for nothing less.
4 5
At KS we believe your music deserves to be showcased on great
quality products that don’t cost the earth. We might not all share
the same taste in music (the ferocious disputes on music forums
prove that), but whether its Irish folk, death metal or any number
of obscure genres which seem to be multiplying by the minute, the
artists responsible for connecting with you through their craft have
bared their souls to do so. And we think that’s worth celebrating.
6 7
Box contents
• KS Fresh clock radio dock
• Mains adaptor
• User manual
Functions
1. Play and charge iPhone5/Touch5/Nano7
2. FM radio: save up to 10 stations
3. Dual alarm clock radio
4. 4. Wake to iPod/iPhone/FM/Buzzer
5. Bright LED display
Keys and controls
Press and hold to enter standby mode or press once to switch between
iPod/radio/aux-in modes
Volume down/Alarm 1
Volume up/Alarm 2
Previous track/down
Play/pause
Next track/up
When alarm rings, press to snooze
• ON/OFF switch button
• DC IN socket
• AUX IN socket
8 9
Turning the Fresh on
1. First, make sure the mains adaptor is connected and that the main power switch on the rear of the unit
is in the ‘ON position.
2. Press the
button to turn the unit on. The screen will now be illuminated. Wait two seconds
for the unit to boot up.
3. While the unit is turned on, press the
button to scroll through the various audio input modes,
which are: iPod, FM radio and auxiliary audio (AUX).
4. If you press and hold
again, the unit will turn off and the screen will become dim, entering
standby mode.
Setting the clock
1. Simply press the drawer on the front of the unit to eject it and dock your iPod/iPhone or alternatively:
With the Fresh in standby mode, press and hold the
button to set the time and choose between the
12 or 24 hour formats by pressing the
or
button. Press
to confirm. The hour digit will then
be flashing.
2. Press the
or
button to increase or decrease the hours and press the
button to confirm your
setting. The minute digits will now be flashing. Press the
or
button to decrease or increase the
minutes and press
to save the time.
Note: There may be up to 59 seconds time difference between your iPod/iPhone and the Fresh.
Setting alarm 1
1. Put the Fresh into standby mode.
2. Press and hold the
button. The alarm 1 icon will show up and the hour digit will be flashing.
Press the
or
button to change the hours, followed by
to confirm.
3. Press the
or
button to change the minutes, followed by
to confirm.
4. The alarm 1 icon will then flash. Press the
or
button to select between buzzer, FM or iPod to
wake you up, followed by
to confirm.
Note: If the alarm sound is set to iPod and there is no iPod or iPhone connected, the alarm sound will
automatically switch to buzzer. In order to wake to your iPod or iPhone, it must be connected. If it is
in play mode, no alarm will sound. If your iPod or iPhone has less than one hour of songs, put it in
repeat mode.
5. The alarm is now set.
10 11
Setting alarm 2
1. Put the Fresh into standby mode.
2. Press and hold the
button. The alarm 2 icon will show up and the hour digit will be flashing.
Press the
or
button to change the hours, followed by
to confirm.
3. Press the
or
to change the minutes, followed by
to confirm.
4. The alarm 2 icon will then flash. Press the
or
button to select between buzzer, FM or iPod to
wake you up, followed by
to confirm.
Note: If the alarm sound is set to iPod and there is no iPod or iPhone connected, the alarm sound
will automatically switch to buzzer. In order to wake to your iPod or iPhone, it must be connected and
powered off. If it is in play mode, no alarm will sound. If your iPod or iPhone has less than one hour of
songs, put it in repeat mode.
5. The alarm is now set.
Snoozing
Press the
button. The alarm will then go off and will resume again in nine minutes.
Note: The alarm will repeat every day until it is reset.
Turning off the alarm
Press the
button.
Cancelling the alarm(s) you have set
With the Fresh in standby mode, press the / button once until the alarm icon stops showing on
the LED display.
Playing your music
1. To listen to music, dock your iPod or iPhone, turn the Fresh on and select iPod mode. Your music will
start playing automatically.
2. To pause your music, press the
button. To resume playback, press it again.
3. To go to the next or previous track, use the
or
button. To search the current track using fast
forward or rewind, press and hold
or
while the track is playing.
4. To adjust the volume, press the
or
button.
Note: When you connect your iPod or iPhone, the time will be synchronized automatically.
12 13
Sleep
1. To enter into sleep mode, press the
button on the top of the Fresh while listening
to your iPod/iPhone or the radio.
2. Cycle through to choose from 10 minutes to 90 minutes.
3. The unit will automatically turn off after the selected time.
4. To adjust the sleep time, press
again and choose from 10 to 90 minutes.
5. To cancel the sleep time, press
repeatedly until ‘00’ flashes on the display.
6. To stop listening at any time, press and hold the
button.
Connect other audio devices
By using the aux-in jack located at the rear of the Fresh, you can listen to other audio players too.
1. Insert the plug of a 3.5 mm audio cable into the HEADPHONE or LINE-OUT socket on your audio
device, then insert the other end of the cable into the aux-in socket on the Fresh.
2. To put the Fresh into aux mode, press the
button until the aux icon appears on the display.
3. Turn your device on and press play.
Listen to the radio
For the best FM radio clarity, fully extend the wire antenna which is located at the rear of the Fresh.
It is important not to alter, obstruct or attach other antennas to this wire antenna.
1. To turn the radio on, press the
button until FM appears on the LED screen.
2. To tune in a desired station manually, press the
or
button to search.
3. To tune in a desired station using auto scan, press and hold the
or
button.
4. To save the station to a channel preset, press and hold the
button until the letters ‘ch’ with a
number next to them flash on the screen. Then press the
or
button to select a channel from
1 to 10. Press the
button to confirm.
5. To listen to a preset station when in radio mode, press the
button. The display will show the letters
‘ch’ with a number next to them. Then press the
or
button to select a channel from 1 to 10.
Press the
button to confirm.
14 15
Specifications
Frequency response: 60 Hz – 20 kHz
Sensitivity: 70 dB
S/N: 50 dB
Output RMS: 2 x 5 W @ 4 ohms + passive bass radiator
Unit size: H167 x W265 x D92 (mm)
Troubleshooting
We hope you’ve now got all the information y ou need to get started, but if you’re having problems
with anything, please feel free to contact us at: support
@
kitsound.co.uk
We apologise for any inconvenience caused by minor inconsistencies in these instructions, which may occur as a result of
product improvement and development.
Care for your Fresh
Please DONT
• Get the Fresh wet
• Drop the Fresh as this will invalidate your warranty
• Open up the Fresh. There are no user serviceable parts inside
• Use any other mains adaptor than the one supplied
• Expose the Fresh to extreme temperatures or rapid changes of hot to cold or vice versa
Please DO
• Clean the Fresh with a soft dry cloth and no detergents
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8

KitSound KSFRESHPIEU User manual

Category
Mobile device dock stations
Type
User manual
This manual is also suitable for

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI