USER MANUAL
kitsound.co.uk
AUDIO
SPORTSBAND
JB.2597 / Made in China. © KitSound™ 2013
Christchurch, Dorset. BH23 4FL
WARNING: Long-term exposure to loud music
may cause hearing damage. It is best to avoid
extreme volume when using this product,
especially for extended periods.
For your own safety, please be aware of your
surroundings when using this product.
We are craftspeople. We are
musicians. We are KitSound
™
And we all commit ourselves to
achieving one shared goal: Bringing
people closer to their music. By truly
understanding music we stay true to
its craft. Pure, rich, incredible sound.
We’ll settle for nothing less.
At KS we believe your music deserves
to be showcased on great quality
products that don’t cost the earth.
We might not all share the same taste
in music (the ferocious disputes on
music forums prove that), but
whether it’s Irish folk, death metal or
any number of obscure genres which
seem to be multiplying by the minute,
the artists responsible for connecting
with you through their craft have
bared their souls to do so. And we
think that’s worth celebrating.
Using the Audio SportsBand
When putting the Audio SportsBand on
your head, make sure the KS logo is at
the front. Then make sure the left and
right speakers sit comfortably on your
ears for the best sound quality. Plug one
of the provided cables into the Audio
SportsBand and your device. Turn the
volume on your device down, press
play and then adjust the volume to a
comfortable listening level.
Washing the Audio SportsBand
Firstly, you will need to remove the
speakers from the Audio SportsBand.
Please follow these instructions:
1. Unpeel the Velcro
®
holding the
speaker in place
2. Work the speaker out of the hole
without pulling the cable if possible
3. Complete steps 1 and 2 for the
other speaker
4. Wash the Audio SportsBand following
the guidelines (adjacent) and allow
to dry
5. With the Audio SportsBand inside
out, put each speaker back through
the hole with the Velcro
®
facing down
6 Make sure the speakers are firmly
stuck to the Velcro
®
Washing guidelines
Please see below guidelines for
washing the Audio SportsBand:
Do not dry clean
Iron on low heat
Do not bleach
Tumble dry with no heat
Wash with cold water
Specifications:
• Driver unit: 30 mm
• Frequency response: 20 Hz – 20 kHz
• Sensitivity: 106 dB
• Audio plug: 3.5 mm
• Cable lengths: 50 cm, 100 cm
• Material: 95% Terylene, 5% Spandex
Box contains:
• KS Audio SportsBand
• Connection cables x 2
Troubleshooting
We hope you’ve now got all the information
you need to get started, but if you’re
having problems with anything, please
feel free to contact us at:
support
@
kitsound.co.uk
-
1
-
2
-
3
-
4
KitSound KSSBBL User manual
- Category
- Headphones
- Type
- User manual
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI