Pottinger TERRASEM C8 FERTILIZER Operating instructions

8518.en80.V.2

Original Operating Instructions

Mulch seeder

TERRASEM C8 /CLASSIC FERTILIZER

8518 : +. . 00036

PÖTTINGER - Trust creates Affinity since 1871

"Quality pays for itself." We therefore apply the highest quality standards to our products,

which are permanently monitored by our in-house quality management team and our man-

agement board Because the safety, perfect function, highest quality and absolute reliability of

our machines in operation are the core competencies for which we stand.

Technical alterations

There may be deviations between these document and the product as we are constantly de-

veloping our products. Therefore no claims may be derived from the data, illustrations and

descriptions. Please contact your Specialist Service Centre for any binding information about

specific features of your machine.

Legal notes

Please note that only the German operating manual constitutes the original operating manual

in regards to the guidelines 2006/42/EC. Operating manuals on languages different than

German, are translations of the German original manual of operation.

We would ask you to please understand that changes to the scope of supply with regard to

form, equipment and technical specifications are possible at any time.

Any form of reprint, translation or reproduction, including excerpts, requires the written appro-

val of PÖTTINGER Landtechnik GmbH.

All rights according to copyright law are expressly reserved by PÖTTINGER Landtechnik

GmbH.

Guarantee and warranty

Please note that the statutory guarantees and warranties granted voluntarily by PÖTTINGER

Landtechnik GmbH can only be invoked for damage stemming from construction, production

or material faults.

PÖTTINGER Landtechnik GmbH cannot be held liable for damage stemming from the use of

consumables such as belts, chains, shafts, gears, tyres, knives teeth or tarpaulins or covers

made from fabric materials or for damage stemming directly or indirectly from contact with

foreign bodies (stones, metal fragments, etc.).

You can find additional information about your machine in MyPöttinger.

Are you looking for suitable accessories for your machine? No problem! All the information

you require is here at your disposal. And if we don't have what you're looking for, then your

Specialist Service Centre is there for you with help and advice.

Scan the QR code on the type plate of the machine or visit http://www.mypoettinger.com

2 | Original Operating Instructions TERRASEM C8 /CLASSIC FERTILIZER 8518.en80.V.2

Dear Customer

The Operating instructions will allow you to become acquainted with your machine and pro-

vide clear information about safe and correct handling, maintenance and care. Take the time

to read the instructions all the way through.

The operating instructions and the supplement to the operating instructions for USA / CANA-

DA are an integral part of the machine. They must be stored in an accessible location at the

workplace for the entire service life of the machine. The user must independently supplement

the instructions regarding national regulations on accident prevention, traffic safety and envi-

ronment protection.

All persons that are entrusted with the operation, maintenance or transport of the machine

must read and understand these instructions, in particular the safety instructions, before be-

ginning work. Any warranty claims lapse on non-observance of these Instructions.

If you have any questions regarding the contents of these Operating instructions or further

questions regarding the machine, please contact your PÖTTINGER service partner.

Correct maintenance and care according to the defined maintenance intervals will ensure the

operational and traffic safety, as well as the reliability of your machine.

Use only original spare parts or spare parts and accessories that are approved by PÖTTING-

ER Landtechnik GmbH. Only original spare parts that are approved by us have been tested

and accordingly are appropriate for use in your machine. The use of any unapproved parts

forfeits any guarantee or guarantee claim. Even after the end of the warranty period we rec-

ommend using original spare parts to ensure the performance of your machine.

The Product Liability Law obligates manufacturers/dealers to transfer operating instructions

when selling machines, as well as to instruct clients regarding the safety, operation and

maintenance regulations concerning the machine. Confirmation in the form of a declaration

of transfer is required to verify that the implement and Instructions have been transferred cor-

rectly. The declaration of transfer is delivered together with the machine.

Every self-employed person and farmer is an entrepreneur within the meaning of the product

liability legislation. Therefore corporate property damage according to the Product Liability

Law is excluded from the liability of PÖTTINGER. Corporate property damage according to

the Product Liability Law refers to damage caused by the machine. Damage to the machine

is not property damage according to the Product Liability Law.

The operating instructions are a part of the machine, therefore you must transfer them when

selling/transferring the machine to a new user. Train and instruct the new owner in the regu-

lations stated.

The PÖTTINGER service team wishes you the best of luck.

8518.en80.V.2 Original Operating Instructions TERRASEM C8 /CLASSIC FERTILIZER | 3

You will find the following representations in this operating manual

DANGER

If you do not follow the instructions in a text section with this marking, there is a risk

of fatal or life-threatening injury.

► All instructions in such text sections must be followed!

WARNING

If you do not follow the instructions in a text section with this marking, there is a risk

of severe injury.

► All instructions in such text sections must be followed!

CAUTION

If you do not follow the instructions in a text section with this marking, there is a risk

of injury.

► All instructions in such text sections must be followed!

NOTICE

If you do not follow the instructions in a text section with this marking, there is a risk

of damage to property.

► All instructions in such text sections must be followed!

TIP

Marked text sections contain recommendations and advice on handling the machine.

ENVIRONMENT

Marked text sections contain advice on the subject of environmental protection.

Equipment marked as optional is available only for certain machine models or in certain

countries.

Images may differ in detail to your machine and should only be considered as indicative.

4 | Original Operating Instructions TERRASEM C8 /CLASSIC FERTILIZER 8518.en80.V.2

Instructions for product handover

Please verify the listed items in accordance with the product liability obligation

Please, tick off where appropriate.

Machine checked according to delivery note. All packing materials removed, all

safety devices, cardan shafts and control elements present.

Machine operation, commissioning and maintenance discussed with and explained

to the clients using the operational instructions.

Tyre air pressure verified.

Tightness of wheel nuts verified.

Reference to correct p.t.o. speed and direction of rotation.

Adaptation to tractor complete; three point adjustment, drawbar height, attachment

of handbrake lever in tractor cab, forced steering set, compatibility of all necessary

electrical, hydraulic and pneumatic connectors to tractor checked and established.

Cardan shaft correctly cut to length.

Test run of all machine functions in addition to parking brake and operating brake

completed and no defects noted.

Function explanation during test run.

Tilting to transport and working position explained.

Information regarding optional equipment provided.

References made to compulsory reading of the operational instructions.

Confirmation is required as evidence that the machine and the operating instructions (with a

supplement to the operating instructions for North America depending on the country of des-

tination) have been delivered properly. For this purpose you have received a confirmation e-

mail from PÖTTINGER. If you have not received this mail, please contact your local dealer.

Your dealer can fill in the handover declaration online.

Austria

PÖTTINGER Landtechnik GmbH

Industriegelände 1

4710 Grieskirchen

Phone+43 7248 600-0

Fax+43 7248 600-2513

[email protected]

8518.en80.V.2 Original Operating Instructions TERRASEM C8 /CLASSIC FERTILIZER | 5

Amendment index

Date Index Amendment reason Amended chapter

20.07.2020 8518.en.80U.0 Amendment notice 8504/1197 Maintenance369

Operation283

6 | Original Operating Instructions TERRASEM C8 /CLASSIC FERTILIZER 8518.en80.V.2

Factory standard tightening torques

Tightening torque.............................................................................................................. 18

Layout and function

Functional elements.......................................................................................................... 19

Tegosem function elements.............................................................................................. 23

Electrical controls.............................................................................................................. 24

Hydraulic controls.............................................................................................................. 25

Sensors and fitting position............................................................................................... 25

Accessories included in the scope of delivery................................................................... 26

Upgrade program.............................................................................................................. 26

At a glance

Identification...................................................................................................................... 27

Type plate with CE marking......................................................................................... 27

Description

EU - declaration of conformity........................................................................................... 29

Intended use..................................................................................................................... 30

Non-approved useage....................................................................................................... 30

Technical data

Dimensions....................................................................................................................... 31

Coupling / lower link.......................................................................................................... 31

Tyres................................................................................................................................. 31

Weights............................................................................................................................. 31

Power requirements.......................................................................................................... 32

Machine operation limits................................................................................................... 32

Load limits......................................................................................................................... 32

Seed placement................................................................................................................ 32

Brake system.................................................................................................................... 33

Setting the brakes........................................................................................................ 33

Electrics............................................................................................................................. 34

POWER CONTROL Terminal........................................................................................... 34

EXPERT 75 Terminal (Option).......................................................................................... 35

EXPERT 100 CCI Terminal (Option)................................................................................. 36

Contents

8518.en80.V.2 Original Operating Instructions TERRASEM C8 /CLASSIC FERTILIZER | 7

Noise emission.................................................................................................................. 36

Safety and the environment

Safety advice..................................................................................................................... 37

Qualification of personnel............................................................................................ 37

Performing maintenance work..................................................................................... 37

Organisational measures............................................................................................. 37

Maintaining operational safety..................................................................................... 37

Special hazards........................................................................................................... 38

Safety devices................................................................................................................... 39

Safety devices............................................................................................................. 39

Warning signs.............................................................................................................. 40

Traffic safety equipment.............................................................................................. 44

Environmental protection.................................................................................................. 48

Handling hazardous substances................................................................................. 48

Fuel efficiency and soil protection............................................................................... 48

Disposal of the machine.............................................................................................. 48

Power-Control Terminal operation

Overview of the POWER CONTROL terminal.................................................................. 50

Input - Keypad............................................................................................................. 50

Basic functions.................................................................................................................. 52

Control variants........................................................................................................... 52

Turning terminal on/off and “START” menu................................................................ 52

System Menu............................................................................................................... 55

“WORK” menu (operating mode)...................................................................................... 56

Turning the damp drill operation on and off................................................................. 58

Start and stop sowing operation.................................................................................. 59

Adjusting sowing rate.................................................................................................. 60

Track marker configuration.......................................................................................... 60

Adjusting the tramline counter..................................................................................... 61

Turning lighting on and off........................................................................................... 61

Emergency shutdown.................................................................................................. 62

“DATA” menu (Operating data)......................................................................................... 62

Menu: "DATA - Day counter" (display and reset)........................................................ 62

Menu: "DATA - Year counter (display and reset)........................................................ 64

“SET” menu (basic settings).............................................................................................. 66

Contents

8 | Original Operating Instructions TERRASEM C8 /CLASSIC FERTILIZER 8518.en80.V.2

100-meter calibration................................................................................................... 67

Seed Library settings................................................................................................... 69

Dosing wheel calibration.............................................................................................. 73

Tramline rhythm settings............................................................................................. 80

Adjusting the tramline rhythm............................................................................................ 83

Adjust seed predosing (seed drilling).......................................................................... 86

Adjusting the waiting time for seed................................................................................... 88

Adjust machine functions monitoring........................................................................... 89

Menu "Manual operation" / "Damp drilling".................................................................. 90

“Seed Flow Monitoring” menu..................................................................................... 92

Allocation of seed flow monitoring sensors to tramline..................................................... 96

“CONFIG” menu (machine configuration)......................................................................... 98

Open the “Machine data" menu................................................................................... 98

“Compatibility” menu.................................................................................................... 99

"TEST" menu.................................................................................................................... 101

Open the “Dosing Wheel Calibration Area Trial” menu............................................... 101

“Motor test" menu........................................................................................................ 103

“Fill Level and Speed Signal" menu............................................................................. 104

“Error list” menu........................................................................................................... 105

EXPERT 75 ISOBUS-Terminal

EXPERT 75 Terminal overview......................................................................................... 107

Input keypad................................................................................................................ 107

CCI ISOBUS-Terminal

CCI 100 Terminal overview............................................................................................... 109

Input keypad................................................................................................................ 109

CCI 1200 Terminal overview....................................................................................... 111

ISOBUS operation

Input masks....................................................................................................................... 112

Selection masks................................................................................................................ 113

Terminal on /off - "START" menu...................................................................................... 114

Open “WORK” menu (operating mode)............................................................................ 115

Damp drill operation settings....................................................................................... 118

Turning manual operation on and off........................................................................... 118

Start and stop sowing operation.................................................................................. 118

Contents

8518.en80.V.2 Original Operating Instructions TERRASEM C8 /CLASSIC FERTILIZER | 9

Adjusting sowing amount............................................................................................. 119

Operating the tram line counter................................................................................... 119

Turning lighting on and off........................................................................................... 120

Emergency shutdown.................................................................................................. 120

"DATA" menu.................................................................................................................... 120

"DATA" menu, total counter......................................................................................... 120

"DATA" Daily Part-counter menu................................................................................. 121

"DATA" Year Counter menu........................................................................................ 122

“SET” menu (basic settings).............................................................................................. 123

“SET” menu overview.................................................................................................. 124

"SET" menu: Settings for butterfly valves.................................................................... 125

Butterfly valve calibration............................................................................................. 126

Adjust butterfly valves individually............................................................................... 129

"IDS Sensor Test" menu.............................................................................................. 129

Butterfly Valve distributor head.................................................................................... 131

"Manual operation" / "Damp drilling" menu.................................................................. 132

"100-metre calibration" menu...................................................................................... 134

Seed Library setting..................................................................................................... 135

“Seed File” Menu............................................................................................................... 136

"Seed file" menu settings.................................................................................................. 137

“Dosing Wheel Suggestion” menu.................................................................................... 138

Dosing wheel calibration................................................................................................... 139

Tramline rhythm settings................................................................................................... 146

Key prioritization................................................................................................................ 151

“Seed flow monitoring” menu....................................................................................... 152

Allocation of seed flow monitoring sensors to tramline..................................................... 155

Automatically adjust butterfly valves:................................................................................ 157

"CONFIG" menu (machine configuration)......................................................................... 157

“CONFIG” 1 menu....................................................................................................... 158

"Module Information" menu......................................................................................... 159

"Serial Number" menu................................................................................................. 160

Menu: "Butterfly valve assignment"............................................................................. 161

Compatibility Mode menu............................................................................................ 162

“TEST” Menu (Sensor Test).............................................................................................. 163

Open the "TEST" menu............................................................................................... 167

"TEST" menu screen 2 - Sensors 2 ............................................................................ 168

"TEST" menu screen 3 - Fill level and Speed signals................................................. 169

"TEST" menu mask 4 - Error list.................................................................................. 169

Contents

10 | Original Operating Instructions TERRASEM C8 /CLASSIC FERTILIZER 8518.en80.V.2

“Motor test" menu........................................................................................................ 170

"Seed flow monitoring indicator" menu........................................................................ 171

"IDS Sensor Test" menu.............................................................................................. 172

Open the “Dosing Wheel Calibration Area Trial” menu............................................... 174

Seed Complete (Option)

Seed Complete................................................................................................................. 177

Attaching to tractor............................................................................................................ 178

Seed drill control system................................................................................................... 179

Seed drill general control system................................................................................ 179

Seed drill control: variable sowing rate............................................................................. 180

Manually changing the distribution amount dosing 1 / dosing 2 (only with fertilizer ma-

chines):.............................................................................................................................. 181

Switching the output quantities on/off transmission.......................................................... 181

CCI command.............................................................................................................. 182

General............................................................................................................................. 182

3. Tab Geometry............................................................................................................... 183

Check the values adopted from the seed drill control:...................................................... 185

Fields:................................................................................................................................ 185

Section Control.................................................................................................................. 185

Operating with CCI.Command.......................................................................................... 187

Seed drill control: with part-width control..................................................................... 191

Preparation for CCI.Control............................................................................................... 196

First steps.................................................................................................................... 196

First steps.......................................................................................................................... 197

Producing a job file with the application map.................................................................... 197

Generating a job file with two application maps................................................................ 198

Generating an order file without application maps............................................................ 198

Exporting the job file from FMIS to the Isobus terminal.................................................... 198

Import the order data from CCI.Control....................................................................... 198

Unlocking apps.................................................................................................................. 198

Switching between apps.............................................................................................. 200

Seed Complete wiring diagram................................................................................... 201

Operation of the functional elements

Machine functions............................................................................................................. 203

Turn blower on and off................................................................................................. 203

Activate / deactivate / override functions (ARTIS)....................................................... 203

Contents

8518.en80.V.2 Original Operating Instructions TERRASEM C8 /CLASSIC FERTILIZER | 11

Valves / cover / auxiliary equipment

Opening / closing cover and valves.................................................................................. 206

Seed hopper rolling cover............................................................................................ 206

Seed hopper seed discharge....................................................................................... 207

Seed hopper gate valve............................................................................................... 207

Dosing wheel housing................................................................................................. 209

Fit / remove dosing wheel............................................................................................ 210

Dosing system............................................................................................................. 212

Distributor head with half-machine shut-off................................................................. 212

Distributor head without half-machine shut-off............................................................ 214

Shut off distributor head outlets per tramline motor..................................................... 214

Auxiliary and special functions.......................................................................................... 215

Collection bag.............................................................................................................. 215

Telescopic drawbar..................................................................................................... 216

Extend the telescopic drawbar.......................................................................................... 216

Retract the telescopic drawbar.......................................................................................... 217

Climbing aids to the operating or loading platform...................................................... 218

Loading platform ladder.................................................................................................... 218

Steps for the side loading platform.................................................................................... 219

Transport guard

Transport safeguards........................................................................................................ 222

Locking hooks and securing pins................................................................................ 222

Stopcock for hydraulic functions.................................................................................. 224

Operation

Initial operation.................................................................................................................. 227

Brief instructions.......................................................................................................... 227

Adapting the tractor hydraulics.................................................................................... 228

Emergency-brake adjustment bolt position (hydraulic single pipe brake H1L)............ 228

Breakaway cable attachment (emergency brake valve hydraulic single pipe brake

H1L)............................................................................................................................. 229

Attaching the machine................................................................................................. 230

Determine tractor ballast............................................................................................. 232

Determine the required tractor ballast weights using the weighing method...................... 232

Determine the required tractor ballast weights using calculation...................................... 234

Contents

12 | Original Operating Instructions TERRASEM C8 /CLASSIC FERTILIZER 8518.en80.V.2

Adjusting and retrofitting................................................................................................... 235

Track looseners (option).............................................................................................. 236

Track marker (Optional)............................................................................................... 237

Track marker marking disc................................................................................................ 237

Settings for the distributor head inserts....................................................................... 240

Distributor head insert for 75cm row spacing ................................................................... 240

Distributor head insert for 50cm row spacing ................................................................... 243

Distributor head insert for 37.5cm row spacing ................................................................ 246

Distributor head insert for 25cm row spacing ................................................................... 249

Dismounting the distributor head insert............................................................................. 251

Hydraulic blower drive................................................................................................. 252

Basic setting...................................................................................................................... 252

Blower drive nominal speed for coarse seed (blower drive without Load-Sensing opera-

tion)................................................................................................................................... 253

Blower drive nominal speed for fine seed (blower drive without Load-Sensing opera-

tion)................................................................................................................................... 254

Blower drive basic settings (with Load-Sensing control (optional))................................... 256

Adjusting seed dosage................................................................................................ 259

Distributor unit and tramlines (machines with no electric butterfly valves)........................ 262

Distribution unit and tramlines (machines with electric butterfly valves)........................... 264

Sowing tables for electric dosing....................................................................................... 265

Dosing wheel overview..................................................................................................... 270

Adapt coulter system................................................................................................... 272

Seed sowing depth............................................................................................................ 273

Setting the coulter pressure rollers................................................................................... 276

Hydraulic coulter pressure................................................................................................ 278

Contact pressure (ground adaptation) of the folding sections..................................... 281

Seed drill Fertilizer PRO (option) setting..................................................................... 283

Front board (option)..................................................................................................... 285

Disc-System................................................................................................................ 286

Levelling board............................................................................................................ 290

Settings for the edge plates......................................................................................... 291

Setting the harrow (optional)....................................................................................... 294

Levelling harrow settings............................................................................................. 297

Levelling harrow add-on.................................................................................................... 300

Adjusting the tramline marker (optional)...................................................................... 302

Additional tank (option)................................................................................................ 304

Tramlines: for example, for laying..................................................................................... 306

Contents

8518.en80.V.2 Original Operating Instructions TERRASEM C8 /CLASSIC FERTILIZER | 13

Coupling............................................................................................................................ 308

Compressed air braking system (option)..................................................................... 309

Disconnect air pressure-braking system connecting lines................................................ 311

Connect hydraulic hoses............................................................................................. 311

Connect cable.............................................................................................................. 312

Mounting the POWER CONTROL terminal................................................................. 313

Fit EXPERT 75 ISOBUS terminal ............................................................................... 314

Fit EXPERT 100 (CCI-100) Terminal ......................................................................... 315

Connect the tractor terminal........................................................................................ 315

Work assignment.............................................................................................................. 316

Transport run............................................................................................................... 317

Transport on loading surfaces........................................................................................... 317

Turning manoeuvres on slopes......................................................................................... 318

Fill the seed hopper..................................................................................................... 318

Switch machine from road transport position to working position (ARTIS).................. 319

Switch machine from road transport position to working position (ARTIS +).............. 321

Sowing with POWER CONTROL Terminal / ISOBUS Terminal.................................. 323

Switch machine from working position to transport position (ARTIS).......................... 324

Switch machine from working position to transport position (ARTIS +)....................... 326

Empty the seed hopper............................................................................................... 328

Decommissioning ............................................................................................................. 329

Empty the dosing wheel/dosing wheel housing........................................................... 329

Empty the seed hopper............................................................................................... 331

Uncouple the machine from the tractor....................................................................... 332

Uncoupling........................................................................................................................ 332

Dismounting the POWER CONTROL terminal............................................................ 333

Remove EXPERT 75 Terminal.................................................................................... 334

Remove EXPERT 100 Terminal.................................................................................. 335

Separate the tractor terminal....................................................................................... 335

Unplug cable................................................................................................................ 335

Disconnect the hydraulic hoses................................................................................... 336

Attach anti-theft device................................................................................................ 336

Care and maintenance

Ensure operational readiness........................................................................................... 338

General tips....................................................................................................................... 338

Daily maintenance............................................................................................................. 339

Cleaning the dust feedback......................................................................................... 339

Contents

14 | Original Operating Instructions TERRASEM C8 /CLASSIC FERTILIZER 8518.en80.V.2

Brake fluid fill level....................................................................................................... 340

Check the brake hoses and hose couplings................................................................ 341

Air tank........................................................................................................................ 341

Check hydraulic system............................................................................................... 343

Check / change lighting of lamps................................................................................. 343

Check / replace warning signs, warning triangles, warning sheets............................. 345

After every season............................................................................................................ 346

Clean the dosing wheel housing and the dosing wheel............................................... 346

Clean detachable dosing wheels................................................................................. 348

Clean inside the seed hopper...................................................................................... 354

Clean outside of machine............................................................................................ 355

Sowing coulter scrapers.............................................................................................. 355

Dust guard (option)...................................................................................................... 357

As required........................................................................................................................ 359

Clean the dosing wheel housing and the dosing wheel............................................... 359

Clean inside the seed hopper...................................................................................... 362

Clean terminal............................................................................................................. 363

Clean outside of the machine...................................................................................... 363

Front board wearing parts........................................................................................... 364

Harrow tines wear limit................................................................................................ 365

Replace the track loosener chisel coulter ................................................................... 367

Thrust roller replacement............................................................................................. 367

Seeding unit Fertilizer PRO (option) shear bolt........................................................... 369

After service life................................................................................................................. 370

After first 10 hours of operation................................................................................... 370

Retighten the axle bolts and nuts...................................................................................... 370

Check the brake pads.................................................................................................. 370

Every 20 operating hours............................................................................................ 372

Lubricate feeler wheel swivel bearing............................................................................... 372

Lubricate filling auger swivel mechanism.......................................................................... 373

Initially after 100 hours, then every 500 hours or every 2 years.................................. 374

Hydraulic-oil filter............................................................................................................... 374

PTO shaft plug-in pump hydraulic oil................................................................................ 374

Every 2 years............................................................................................................... 375

Change brake fluid............................................................................................................ 375

Every 8000 hectares.................................................................................................... 376

Check / replace tyre packer wheel bearing....................................................................... 376

Every 4 years............................................................................................................... 376

Contents

8518.en80.V.2 Original Operating Instructions TERRASEM C8 /CLASSIC FERTILIZER | 15

Check and adjust hydraulic pressure accumulator........................................................... 376

Hydraulic hoses........................................................................................................... 377

Every 6 years.................................................................................................................... 377

Lubrication chart................................................................................................................ 377

Operating materials

Equipment specification.................................................................................................... 379

Operating materials and fill quantities............................................................................... 379

Help and advice

What to do if...................................................................................................................... 380

Alarm messages at the Power Control and CCI-ISOBUS Terminal............................ 380

Messages at the CCI terminal / tractor terminal................................................................ 395

Indicated value / indicated symbol incorrect................................................................ 401

Seed delivery faulty..................................................................................................... 402

Terminal deactivated................................................................................................... 403

Lighting........................................................................................................................ 403

Hydraulic emergency actuation in the event of an electrical failure (Artis plus).......... 404

Sensors

Sensor troubleshooting..................................................................................................... 406

Status of IDS motor sensors............................................................................................. 406

Status of seed flow sensors.............................................................................................. 406

Plans

Wiring diagrams................................................................................................................ 408

Electric......................................................................................................................... 408

Cable harness................................................................................................................... 408

Artis plus cable tree hydraulic extension........................................................................... 410

Hydraulic circuit diagrams........................................................................................... 412

Terrasem C8 Artis hydraulic plan...................................................................................... 412

Terrasem C8 Artis plus hydraulic plan.............................................................................. 414

Supplement to USA / CANADA operating instructions

Warning signs English USA / CANADA............................................................................ 416

Secure towing of loads...................................................................................................... 423

Contents

16 | Original Operating Instructions TERRASEM C8 /CLASSIC FERTILIZER 8518.en80.V.2

Index 424

Contents

8518.en80.V.2 Original Operating Instructions TERRASEM C8 /CLASSIC FERTILIZER | 17

Tightening torque

This factory standard applies to all metric bolts for which no special tightening torque is

specified in the drawing/manual. The relevant grade is visible on the bolt head.

• The values given are nominal and are valid for a head friction rate of IJ=0.14 and a

thread friction of IJ=0.125 Slight tensioning force differences can exist through differing

friction rates. The values given are to be kept to a tolerance of ± 10%.

• By using the given tightening torque and the existing friction rate used, then up to 90%

of the minimum yield strength of the bolt material is used in accordance with DIN ISO

898 .

• If a specific tightening torque is given for a bolt connection, then all these bolt connec-

tions are to be tightened to the specified tightening torque using a torque wrench.

Thread Grade 8.8 Grade 10.9

Tightening tor-

que in Nm

Tensioning force

in N

Tightening tor-

que in Nm

Tensioning force

in N

M 4 3.1 4000 4.4 5700

M 5 6.2 6600 8.7 9300

M 6 10.5 9300 15 13000

M 8 25 17000 36 24000

M 10 50 27000 70 38000

M 12 86 39500 121 56000

M 14 135 54000 195 76000

M 16 215 75000 300 105000

M 20 410 117000 580 164000

M24 710 168000 1000 237000

M 30 1400 270000 2000 380000

M 8 x 1 27 18700 38 26500

M 10 x 1.25 53 29000 74 41000

M 12 x 1.25 95 44500 130 63000

M 14 x 1.5 150 60000 210 85000

M 16 x 1.5 230 81000 320 115000

M 20 x 1.5 460 134000 650 189000

M 24 x 2 780 188000 1090 265000

Factory standard tightening torques

18 | Original Operating Instructions TERRASEM C8 /CLASSIC FERTILIZER 8518.en80.V.2

Functional elements

Names and functions

Pos. Element Function

1 The drawbar / tele-

scopic drawbar with

attached rocker

enables tight curve turning on headlands. During transporta-

tion; telescopic (optional).

Drawbar with towing eye; telescopic (optional)

2 Support stand Ensures stability when the machine is parked.

3 The loading plat-

form with a ladder

Access platform with fold-out ladder for filling the seed hopper,

and for care and maintenance work.

4 Seed hopper Seed hopper

5 Side loading plat-

form

Access platform with ladder and steps, for cleaning and main-

tenance work.

The side platform is only to be used when machine is in the

operating position.

6 Dosing wheel hous-

ing with dosing

wheel

The electrically driven dosing wheel regulates the sowing rate

for the seed drill.

7 Seed distributor For even seed distribution into the sowing hoses that lead to

the coulter system. Mechanically or electrically controlled

valves on the outlets allow the sowing hoses to be shut off as

required.

8 Track marker (Op-

tional)

The track marker indicates the track to be driven. Hydraulic

drive, automatic control.

9 Right rear warning

sign with rear lights

Rear lights and warning signs (depending on country of desti-

nation)

10 Tramline marker

(optional)

Tramline markers indicate the tramlines that are kept free of

seed for machines that follow. Hydraulic drive, automatic or

semi-automatic control.

11 Harrow The harrow closes the sowing lines and evenly covers the

seed with soil.

12 Coulter pressure

rollers

Coulter pressure rollers ensure safe soil closure by re-com-

pacting the furrow.

13 DUAL DISC dou-

ble-disc coulters

The coulter system deposits the seed in the sowing furrow.

14 Tyre packer The tyre packer ensures controlled and uniform recompacting

ahead of the coulters and serves as a chassis for road trans-

portation.

15 Left edge plate For a uniformly even working pattern, the edge plates are

standard and multi-adjustable on both sides .

16 Disc system (Disc

harrow)

The maintenance-free, rubber-mounted discs loosen the soil

over the entire surface.

17 Rolling cover Rollable cover made from tarpaulin is dust and rainproof.

18 Front left warning

sign with side lights

Side lights and warning signs, depending on country of desti-

nation.

Layout and function

8518.en80.V.2 Original Operating Instructions TERRASEM C8 /CLASSIC FERTILIZER | 19

Pos. Element Function

19 Radar sensor Measuring the speed

20 Blower The hydraulically powered blowers provide the air flow re-

quired for the pneumatic delivery of the seed.

21 Right edge plate For a uniformly even working pattern, the edge plates are

standard and multi-adjustable on both sides .

Layout and function

20 | Original Operating Instructions TERRASEM C8 /CLASSIC FERTILIZER 8518.en80.V.2

Page is loading ...

Pottinger TERRASEM C8 FERTILIZER, TERRASEM C8 FERTILIZER CLASSIC Operating instructions

Related papers

Other documents