Pottinger TERRASEM R3 FERTILIZER Operating instructions

8514.en80.V.2

Original Operating Instructions

Mulch seeder

TERRASEM R3 FERTILIZER

8514 : +. . 00031

PÖTTINGER - Trust creates Affinity since 1871

"Quality pays for itself." We therefore apply the highest quality standards to our products,

which are permanently monitored by our in-house quality management team and our man-

agement board Because the safety, perfect function, highest quality and absolute reliability of

our machines in operation are the core competencies for which we stand.

Technical alterations

There may be deviations between these document and the product as we are constantly de-

veloping our products. Therefore no claims may be derived from the data, illustrations and

descriptions. Please contact your Specialist Service Centre for any binding information about

specific features of your machine.

Legal notes

Please note that only the German operating manual constitutes the original operating manual

in regards to the guidelines 2006/42/EC. Operating manuals on languages different than

German, are translations of the German original manual of operation.

We would ask you to please understand that changes to the scope of supply with regard to

form, equipment and technical specifications are possible at any time.

Any form of reprint, translation or reproduction, including excerpts, requires the written appro-

val of PÖTTINGER Landtechnik GmbH.

All rights according to copyright law are expressly reserved by PÖTTINGER Landtechnik

GmbH.

Guarantee and warranty

Please note that the statutory guarantees and warranties granted voluntarily by PÖTTINGER

Landtechnik GmbH can only be invoked for damage stemming from construction, production

or material faults.

PÖTTINGER Landtechnik GmbH cannot be held liable for damage stemming from the use of

consumables such as belts, chains, shafts, gears, tyres, knives teeth or tarpaulins or covers

made from fabric materials or for damage stemming directly or indirectly from contact with

foreign bodies (stones, metal fragments, etc.).

You can find additional information about your machine in MyPöttinger.

Are you looking for suitable accessories for your machine? No problem! All the information

you require is here at your disposal. And if we don't have what you're looking for, then your

Specialist Service Centre is there for you with help and advice.

Scan the QR code on the type plate of the machine or visit http://www.mypoettinger.com

2 | Original Operating Instructions TERRASEM R3 FERTILIZER 8514.en80.V.2

Dear Customer

The Operating instructions will allow you to become acquainted with your machine and pro-

vide clear information about safe and correct handling, maintenance and care. Take the time

to read the instructions all the way through.

The operating instructions and the supplement to the operating instructions for USA / CANA-

DA are an integral part of the machine. They must be stored in an accessible location at the

workplace for the entire service life of the machine. The user must independently supplement

the instructions regarding national regulations on accident prevention, traffic safety and envi-

ronment protection.

All persons that are entrusted with the operation, maintenance or transport of the machine

must read and understand these instructions, in particular the safety instructions, before be-

ginning work. Any warranty claims lapse on non-observance of these Instructions.

If you have any questions regarding the contents of these Operating instructions or further

questions regarding the machine, please contact your PÖTTINGER service partner.

Correct maintenance and care according to the defined maintenance intervals will ensure the

operational and traffic safety, as well as the reliability of your machine.

Use only original spare parts or spare parts and accessories that are approved by PÖTTING-

ER Landtechnik GmbH. Only original spare parts that are approved by us have been tested

and accordingly are appropriate for use in your machine. The use of any unapproved parts

forfeits any guarantee or guarantee claim. Even after the end of the warranty period we rec-

ommend using original spare parts to ensure the performance of your machine.

The Product Liability Law obligates manufacturers/dealers to transfer operating instructions

when selling machines, as well as to instruct clients regarding the safety, operation and

maintenance regulations concerning the machine. Confirmation in the form of a declaration

of transfer is required to verify that the implement and Instructions have been transferred cor-

rectly. The declaration of transfer is delivered together with the machine.

Every self-employed person and farmer is an entrepreneur within the meaning of the product

liability legislation. Therefore corporate property damage according to the Product Liability

Law is excluded from the liability of PÖTTINGER. Corporate property damage according to

the Product Liability Law refers to damage caused by the machine. Damage to the machine

is not property damage according to the Product Liability Law.

The operating instructions are a part of the machine, therefore you must transfer them when

selling/transferring the machine to a new user. Train and instruct the new owner in the regu-

lations stated.

The PÖTTINGER service team wishes you the best of luck.

8514.en80.V.2 Original Operating Instructions TERRASEM R3 FERTILIZER | 3

You will find the following representations in this operating manual

DANGER

If you do not follow the instructions in a text section with this marking, there is a risk

of fatal or life-threatening injury.

► All instructions in such text sections must be followed!

WARNING

If you do not follow the instructions in a text section with this marking, there is a risk

of severe injury.

► All instructions in such text sections must be followed!

CAUTION

If you do not follow the instructions in a text section with this marking, there is a risk

of injury.

► All instructions in such text sections must be followed!

NOTICE

If you do not follow the instructions in a text section with this marking, there is a risk

of damage to property.

► All instructions in such text sections must be followed!

TIP

Marked text sections contain recommendations and advice on handling the machine.

ENVIRONMENT

Marked text sections contain advice on the subject of environmental protection.

Equipment marked as optional is available only for certain machine models or in certain

countries.

Images may differ in detail to your machine and should only be considered as indicative.

4 | Original Operating Instructions TERRASEM R3 FERTILIZER 8514.en80.V.2

Instructions for product handover

Please verify the listed items in accordance with the product liability obligation

Please, tick off where appropriate.

Machine checked according to delivery note. All packing materials removed, all

safety devices, cardan shafts and control elements present.

Machine operation, commissioning and maintenance discussed with and explained

to the clients using the operational instructions.

Tyre air pressure verified.

Tightness of wheel nuts verified.

Reference to correct p.t.o. speed and direction of rotation.

Adaptation to tractor complete; three point adjustment, drawbar height, attachment

of handbrake lever in tractor cab, forced steering set, compatibility of all necessary

electrical, hydraulic and pneumatic connectors to tractor checked and established.

Cardan shaft correctly cut to length.

Test run of all machine functions in addition to parking brake and operating brake

completed and no defects noted.

Function explanation during test run.

Tilting to transport and working position explained.

Information regarding optional equipment provided.

References made to compulsory reading of the operational instructions.

Confirmation is required as evidence that the machine and the operating instructions (with a

supplement to the operating instructions for North America depending on the country of des-

tination) have been delivered properly. For this purpose you have received a confirmation e-

mail from PÖTTINGER. If you have not received this mail, please contact your local dealer.

Your dealer can fill in the handover declaration online.

Austria

PÖTTINGER Landtechnik GmbH

Industriegelände 1

4710 Grieskirchen

Phone+43 7248 600-0

Fax+43 7248 600-2513

[email protected]

8514.en80.V.2 Original Operating Instructions TERRASEM R3 FERTILIZER | 5

Amendment index

Date Index Amendment reason Amended chapter

20.07.2020 8514.en.80U.0 Amendment notice 8504/1197 Maintenance351

Operation261

6 | Original Operating Instructions TERRASEM R3 FERTILIZER 8514.en80.V.2

Factory standard tightening torques

Tightening torque.............................................................................................................. 17

Layout and function

Function elements............................................................................................................. 18

Electrical controls.............................................................................................................. 23

Hydraulic controls.............................................................................................................. 24

Sensors and fitting position............................................................................................... 24

Accessories included in the scope of delivery................................................................... 25

Upgrade program.............................................................................................................. 25

At a glance

Identification...................................................................................................................... 26

Type plate with CE marking......................................................................................... 26

Description

EU - declaration of conformity........................................................................................... 28

Intended use..................................................................................................................... 29

Non-approved useage....................................................................................................... 29

Technical data

Dimensions....................................................................................................................... 30

Coupling / lower link.......................................................................................................... 30

Tyres................................................................................................................................. 30

Weights............................................................................................................................. 30

Power requirements.......................................................................................................... 31

Machine operation limits................................................................................................... 31

Load limits......................................................................................................................... 31

Seed placement................................................................................................................ 31

Hydraulics ........................................................................................................................ 32

Brake system.................................................................................................................... 32

Setting the brakes........................................................................................................ 32

Electrics............................................................................................................................. 33

POWER CONTROL Terminal........................................................................................... 34

EXPERT 75 Terminal (Option).......................................................................................... 35

EXPERT 100 CCI Terminal (Option)................................................................................. 35

Contents

8514.en80.V.2 Original Operating Instructions TERRASEM R3 FERTILIZER | 7

Noise emission.................................................................................................................. 36

Safety and the environment

Safety advice..................................................................................................................... 37

Qualification of personnel............................................................................................ 37

Performing maintenance work..................................................................................... 37

Organisational measures............................................................................................. 37

Maintaining operational safety..................................................................................... 37

Special hazards........................................................................................................... 38

Safety devices................................................................................................................... 39

Safety devices............................................................................................................. 39

Warning signs.............................................................................................................. 40

Traffic safety equipment.............................................................................................. 44

Environmental protection.................................................................................................. 48

Handling hazardous substances................................................................................. 48

Fuel efficiency and soil protection............................................................................... 48

Disposal of the machine.............................................................................................. 48

Power-Control Terminal operation

Overview of the POWER CONTROL terminal.................................................................. 50

Input - Keypad............................................................................................................. 50

Basic functions.................................................................................................................. 52

Control variants........................................................................................................... 52

Turning terminal on/off and “START” menu................................................................ 52

System Menu............................................................................................................... 55

“WORK” menu (operating mode)...................................................................................... 56

Turning the damp drill operation on and off................................................................. 58

Start and stop sowing operation.................................................................................. 59

Adjusting sowing rate.................................................................................................. 60

Track marker configuration.......................................................................................... 60

Adjusting the tramline counter..................................................................................... 61

Turning lighting on and off........................................................................................... 61

Emergency shutdown.................................................................................................. 62

“DATA” menu (Operating data)......................................................................................... 62

Menu: "DATA - Day counter" (display and reset)........................................................ 62

Menu: "DATA - Year counter (display and reset)........................................................ 64

“SET” menu (basic settings).............................................................................................. 66

Contents

8 | Original Operating Instructions TERRASEM R3 FERTILIZER 8514.en80.V.2

100-meter calibration................................................................................................... 67

Seed Library settings................................................................................................... 69

Dosing wheel calibration.............................................................................................. 73

Tramline rhythm settings............................................................................................. 80

Adjusting the tramline rhythm............................................................................................ 83

Adjust seed predosing (seed drilling).......................................................................... 86

Adjusting the waiting time for seed................................................................................... 88

Adjust machine functions monitoring........................................................................... 89

Menu "Manual operation" / "Damp drilling".................................................................. 90

“Seed Flow Monitoring” menu..................................................................................... 92

Allocation of seed flow monitoring sensors to tramline..................................................... 96

“CONFIG” menu (machine configuration)......................................................................... 98

Open the “Machine data" menu................................................................................... 98

“Compatibility” menu.................................................................................................... 99

"TEST" menu.................................................................................................................... 101

Open the “Dosing Wheel Calibration Area Trial” menu............................................... 101

“Motor test" menu........................................................................................................ 103

“Fill Level and Speed Signal" menu............................................................................. 104

“Error list” menu........................................................................................................... 105

EXPERT 75 ISOBUS-Terminal

EXPERT 75 Terminal overview......................................................................................... 107

Input keypad................................................................................................................ 107

CCI ISOBUS-Terminal

CCI 100 Terminal overview............................................................................................... 109

Input keypad................................................................................................................ 109

CCI 1200 Terminal overview....................................................................................... 111

ISOBUS operation

Input masks....................................................................................................................... 112

Selection masks................................................................................................................ 113

Terminal on /off - "START" menu...................................................................................... 114

Radar sensor (Optional).................................................................................................... 116

Open “WORK” menu (operating mode)............................................................................ 116

Damp drill operation settings....................................................................................... 119

Turning manual operation on and off........................................................................... 119

Contents

8514.en80.V.2 Original Operating Instructions TERRASEM R3 FERTILIZER | 9

Start and stop sowing operation.................................................................................. 119

Adjusting sowing amount............................................................................................. 120

Operating the tram line counter................................................................................... 120

Turning lighting on and off........................................................................................... 121

Emergency shutdown.................................................................................................. 121

"DATA" menu.................................................................................................................... 121

"DATA" Daily Part-counter menu................................................................................. 121

"DATA" Year Counter menu........................................................................................ 122

“SET” menu (basic settings).............................................................................................. 123

"Manual operation" / "Damp drilling" menu.................................................................. 124

"100-metre calibration" menu...................................................................................... 125

Seed Library setting..................................................................................................... 126

“Seed File” Menu............................................................................................................... 128

"Seed file" menu settings.................................................................................................. 129

“Dosing Wheel Suggestion” menu.................................................................................... 130

Dosing wheel calibration................................................................................................... 131

Tramline rhythm settings................................................................................................... 138

Key prioritization................................................................................................................ 142

“Seed flow monitoring” menu....................................................................................... 143

Allocation of seed flow monitoring sensors to tramline..................................................... 146

"CONFIG" menu (machine configuration)......................................................................... 147

“CONFIG” 1 menu....................................................................................................... 148

"Module Information" menu......................................................................................... 149

"Serial Number" menu................................................................................................. 150

Menu: "Butterfly valve assignment"............................................................................. 151

Compatibility Mode menu............................................................................................ 152

“TEST” Menu (Sensor Test).............................................................................................. 153

"Seed flow monitoring indicator" menu........................................................................ 157

"IDS Sensor Test" menu.............................................................................................. 158

Seed Complete (Option)

Seed Complete................................................................................................................. 160

Attaching to tractor............................................................................................................ 161

Seed drill control system................................................................................................... 162

Seed drill general control system................................................................................ 162

Seed drill control: variable sowing rate............................................................................. 163

Manually changing the distribution amount dosing 1 / dosing 2 (only with fertilizer ma-

chines):.............................................................................................................................. 164

Contents

10 | Original Operating Instructions TERRASEM R3 FERTILIZER 8514.en80.V.2

Switching the output quantities on/off transmission.......................................................... 164

CCI command.............................................................................................................. 165

General............................................................................................................................. 165

3. Tab Geometry............................................................................................................... 166

Check the values adopted from the seed drill control:...................................................... 168

Fields:................................................................................................................................ 168

Section Control.................................................................................................................. 168

Operating with CCI.Command.......................................................................................... 170

Seed drill control: with part-width control..................................................................... 174

Preparation for CCI.Control............................................................................................... 179

First steps.................................................................................................................... 179

First steps.......................................................................................................................... 180

Producing a job file with the application map.................................................................... 180

Generating a job file with two application maps................................................................ 181

Generating an order file without application maps............................................................ 181

Exporting the job file from FMIS to the Isobus terminal.................................................... 181

Import the order data from CCI.Control....................................................................... 181

Unlocking apps.................................................................................................................. 181

Switching between apps.............................................................................................. 183

Seed Complete wiring diagram................................................................................... 184

Operation of the functional elements

Machine functions............................................................................................................. 186

Turn blower on and off................................................................................................. 186

Activate / deactivate / override functions (ARTIS)....................................................... 186

Valves / cover / auxiliary equipment

Opening / closing cover and valves.................................................................................. 189

Seed hopper rolling cover............................................................................................ 189

Seed hopper seed discharge....................................................................................... 190

Seed hopper gate valve............................................................................................... 190

Dosing wheel housing................................................................................................. 192

Fit / remove dosing wheel............................................................................................ 193

Dosing system............................................................................................................. 195

Distributor head with half-machine shut-off................................................................. 195

Distributor head without half-machine shut-off............................................................ 197

Shut off distributor head outlets per tramline motor..................................................... 197

Contents

8514.en80.V.2 Original Operating Instructions TERRASEM R3 FERTILIZER | 11

Auxiliary and special functions.......................................................................................... 198

Collection bag.............................................................................................................. 198

Telescopic drawbar..................................................................................................... 199

Extend the telescopic drawbar.......................................................................................... 199

Retract the telescopic drawbar.......................................................................................... 200

Climbing aids to the operating or loading platform...................................................... 201

Loading platform ladder.................................................................................................... 201

Steps for the side loading platform.................................................................................... 202

Transport guard

Transport safeguards........................................................................................................ 205

Securing bolts.............................................................................................................. 205

Stopcock for hydraulic functions.................................................................................. 206

Operation

Initial operation.................................................................................................................. 209

Brief instructions.......................................................................................................... 209

Adapting the tractor hydraulics.................................................................................... 210

Emergency-brake adjustment bolt position (hydraulic single pipe brake H1L)............ 210

Breakaway cable attachment (emergency brake valve hydraulic single pipe brake

H1L)............................................................................................................................. 211

Attaching the machine................................................................................................. 212

Determine tractor ballast............................................................................................. 214

Determine the required tractor ballast weights using the weighing method...................... 214

Determine the required tractor ballast weights using calculation...................................... 216

Adjusting and retrofitting................................................................................................... 217

Track looseners (option).............................................................................................. 218

Track marker marking disc.......................................................................................... 219

Settings for the distributor head inserts....................................................................... 221

Distributor head insert for row spacing 50cm.................................................................... 222

Distributor head insert for row spacing 25cm.................................................................... 225

Dismounting the distributor head insert............................................................................. 227

Hydraulic blower drive................................................................................................. 228

Basic setting...................................................................................................................... 228

Blower drive nominal speed for coarse seed (blower drive without Load-Sensing opera-

tion)................................................................................................................................... 229

Blower drive nominal speed for fine seed (blower drive without Load-Sensing opera-

tion)................................................................................................................................... 230

Contents

12 | Original Operating Instructions TERRASEM R3 FERTILIZER 8514.en80.V.2

Blower drive basic settings (with Load-Sensing control (optional))................................... 232

Air amount distribution with side-dressing................................................................... 234

Blockage of sowing tubes................................................................................................. 236

Adjusting seed dosage................................................................................................ 238

Distributor unit and tramlines (machines with no electric butterfly valves)........................ 241

Distribution unit and tramlines (machines with electric butterfly valves)........................... 243

Sowing tables for electric dosing....................................................................................... 244

Dosing wheel overview..................................................................................................... 249

Adapt coulter system................................................................................................... 250

Seed sowing depth............................................................................................................ 251

Setting the coulter pressure rollers................................................................................... 254

Hydraulic coulter pressure................................................................................................ 256

Contact pressure (ground adaptation) of the folding sections..................................... 259

Seed drill Fertilizer PRO (option) setting..................................................................... 261

Front board (option)..................................................................................................... 263

Disc-System................................................................................................................ 264

Levelling board............................................................................................................ 268

Settings for the edge plates......................................................................................... 269

Setting the harrow (optional)....................................................................................... 272

Levelling harrow settings............................................................................................. 275

Levelling harrow add-on.................................................................................................... 278

Adjusting the tramline marker (optional)...................................................................... 280

Additional tank (option)................................................................................................ 282

Tramlines: for example, for laying..................................................................................... 284

Coupling............................................................................................................................ 286

Compressed air braking system (option)..................................................................... 287

Disconnect air pressure-braking system connecting lines................................................ 289

Connect hydraulic hoses............................................................................................. 289

Connect cable.............................................................................................................. 290

Mounting the POWER CONTROL terminal................................................................. 291

Fit EXPERT 75 ISOBUS terminal ............................................................................... 292

Fit EXPERT 100 (CCI-100) Terminal ......................................................................... 293

Connect the tractor terminal........................................................................................ 293

Work assignment.............................................................................................................. 294

Transport run............................................................................................................... 295

Transport on loading surfaces........................................................................................... 295

Turning manoeuvres on slopes......................................................................................... 296

Fill the seed hopper..................................................................................................... 296

Contents

8514.en80.V.2 Original Operating Instructions TERRASEM R3 FERTILIZER | 13

Switch machine from road transport position to working position (ARTIS).................. 297

Switch Terrasem “R” from road transport position to working position (ARTIS).......... 299

Switch machine from road transport position to working position (ARTIS +).............. 300

Switch Terrasem “R” from road transport position to working position (ARTIS +)....... 302

Sowing with POWER CONTROL Terminal / ISOBUS Terminal.................................. 303

Switch machine from working position to transport position (ARTIS).......................... 305

Switch Terrasem “R” working position to transport position (ARTIS).......................... 306

Switch machine from working position to transport position (ARTIS +)....................... 308

Switch Terrasem “R” working position to transport position (ARTIS +)....................... 309

Empty the seed hopper............................................................................................... 310

Decommissioning ............................................................................................................. 311

Empty the dosing wheel/dosing wheel housing........................................................... 311

Empty the seed hopper............................................................................................... 313

Uncouple the machine from the tractor....................................................................... 314

Uncoupling........................................................................................................................ 314

Dismounting the POWER CONTROL terminal............................................................ 315

Remove EXPERT 75 Terminal.................................................................................... 316

Remove EXPERT 100 Terminal.................................................................................. 317

Separate the tractor terminal....................................................................................... 317

Unplug cable................................................................................................................ 317

Disconnect the hydraulic hoses................................................................................... 318

Attach anti-theft device................................................................................................ 318

Care and maintenance

Ensure operational readiness........................................................................................... 320

General tips....................................................................................................................... 320

Daily maintenance............................................................................................................. 321

Cleaning the dust feedback......................................................................................... 321

Brake fluid fill level....................................................................................................... 322

Check the brake hoses and hose couplings................................................................ 323

Air tank........................................................................................................................ 323

Check hydraulic system............................................................................................... 325

Check / change lighting of lamps................................................................................. 325

Check / replace warning signs, warning triangles, warning sheets............................. 327

After every season............................................................................................................ 328

Clean the dosing wheel housing and the dosing wheel............................................... 328

Clean the demountable dosage wheels...................................................................... 330

Clean inside the seed hopper...................................................................................... 336

Contents

14 | Original Operating Instructions TERRASEM R3 FERTILIZER 8514.en80.V.2

Clean outside of machine............................................................................................ 337

Sowing coulter scrapers.............................................................................................. 337

Dust guard (option)...................................................................................................... 339

As required........................................................................................................................ 341

Clean the dosing wheel housing and the dosing wheel............................................... 341

Clean inside the seed hopper...................................................................................... 344

Clean terminal............................................................................................................. 345

Clean outside of the machine...................................................................................... 345

Front board wearing parts........................................................................................... 346

Harrow tines wear limit................................................................................................ 347

Replace the track loosener chisel coulter ................................................................... 349

Thrust roller replacement............................................................................................. 349

Seeding unit Fertilizer PRO (option) shear bolt........................................................... 351

After service life................................................................................................................. 352

After first 10 hours of operation................................................................................... 352

Retighten the axle bolts and nuts...................................................................................... 352

Every 20 operating hours............................................................................................ 353

Lubricate filling auger swivel mechanism.......................................................................... 353

Initially after 100 hours, then every 500 hours or every 2 years.................................. 354

Hydraulic-oil filter............................................................................................................... 354

PTO shaft plug-in pump hydraulic oil................................................................................ 354

Every 200 operating hours.......................................................................................... 355

Check the brake pads....................................................................................................... 355

Every 2 years............................................................................................................... 356

Change brake fluid............................................................................................................ 356

Every 3000 hectares.................................................................................................... 357

Check / replace tyre packer wheel bearing....................................................................... 357

Every 4 years............................................................................................................... 357

Check and adjust hydraulic pressure accumulator........................................................... 357

Every 6 years............................................................................................................... 358

Hydraulic hoses................................................................................................................. 358

Lubrication chart................................................................................................................ 358

Operating materials

Equipment specification.................................................................................................... 360

Operating materials and fill quantities............................................................................... 360

Contents

8514.en80.V.2 Original Operating Instructions TERRASEM R3 FERTILIZER | 15

Help and advice

What to do if...................................................................................................................... 361

Alarm messages at the Power Control and CCI-ISOBUS Terminal............................ 361

Messages at the CCI terminal / tractor terminal.......................................................... 376

Indicated value / indicated symbol incorrect................................................................ 382

Seed delivery faulty..................................................................................................... 383

Terminal deactivated................................................................................................... 384

Lighting........................................................................................................................ 384

Hydraulic emergency actuation in the event of an electrical failure (Artis plus).......... 385

Sensors

Sensor troubleshooting..................................................................................................... 387

Status of IDS motor sensors............................................................................................. 387

Status of seed flow sensors.............................................................................................. 387

Plans

Wiring diagrams................................................................................................................ 389

Electric......................................................................................................................... 389

Cable harness................................................................................................................... 389

Artis plus cable tree hydraulic extension........................................................................... 391

Hydraulic circuit diagrams........................................................................................... 393

Terrasem C6 Artis hydraulic plan...................................................................................... 393

Terrasem C6 Artis plus hydraulic plan ............................................................................. 395

Index 397

Contents

16 | Original Operating Instructions TERRASEM R3 FERTILIZER 8514.en80.V.2

Tightening torque

This factory standard applies to all metric bolts for which no special tightening torque is

specified in the drawing/manual. The relevant grade is visible on the bolt head.

• The values given are nominal and are valid for a head friction rate of IJ=0.14 and a

thread friction of IJ=0.125 Slight tensioning force differences can exist through differing

friction rates. The values given are to be kept to a tolerance of ± 10%.

• By using the given tightening torque and the existing friction rate used, then up to 90%

of the minimum yield strength of the bolt material is used in accordance with DIN ISO

898 .

• If a specific tightening torque is given for a bolt connection, then all these bolt connec-

tions are to be tightened to the specified tightening torque using a torque wrench.

Thread Grade 8.8 Grade 10.9

Tightening tor-

que in Nm

Tensioning force

in N

Tightening tor-

que in Nm

Tensioning force

in N

M 4 3.1 4000 4.4 5700

M 5 6.2 6600 8.7 9300

M 6 10.5 9300 15 13000

M 8 25 17000 36 24000

M 10 50 27000 70 38000

M 12 86 39500 121 56000

M 14 135 54000 195 76000

M 16 215 75000 300 105000

M 20 410 117000 580 164000

M24 710 168000 1000 237000

M 30 1400 270000 2000 380000

M 8 x 1 27 18700 38 26500

M 10 x 1.25 53 29000 74 41000

M 12 x 1.25 95 44500 130 63000

M 14 x 1.5 150 60000 210 85000

M 16 x 1.5 230 81000 320 115000

M 20 x 1.5 460 134000 650 189000

M 24 x 2 780 188000 1090 265000

Factory standard tightening torques

8514.en80.V.2 Original Operating Instructions TERRASEM R3 FERTILIZER | 17

Function elements

Names and functions

Pos. Element Function

1 The drawbar with drawbar

eye / telescopic drawbar

with attached rocker

allows for narrower curves on a headland. Telescopic

when transporting (Optional)

2 Support stand Ensures stability when the machine is parked.

3 Loading platform with a

ladder

Cabin platform with foldable ladder for filling the seed

hopper as well as for maintenance work.

4 Seed hopper Seed hopper

5 Side loading platform Cabin platform with ladder and steps for maintenance

work.

The side platform is only to be used when machine is

in the operating position.

6 Dosing wheel housing with

dosing wheel

The electrically driven dosing wheel regulates the sow-

ing rate for the seed drill.

7 Seed distributor For even seed distribution into the sowing hoses that

lead to the coulter system. Mechanically or electrically

controlled valves at the outputs allow the sowing hose

to be blocked when required.

8 Track marker (Optional) The track marker indicates the track to be driven. Hy-

draulic drive, automatic control.

9 Right rear warning sign

with rear lights

Rear lights and warning signs (depending on country

of destination)

10 Tramline marker (Optional) Tramline markers denote the tramlines that are kept

free of seed for machines that follow. Hydraulic drive,

automatic or semi-automatic control.

11 Harrow tines The harrow closes the sowing lines and evenly covers

the seed with soil.

12 Coulter thrust rollers Coulter thrust rollers ensure safe soil closure by re-

compacting the furrow.

13 DUAL DISC double-disc

coulters

The coulter system deposits the seed in the sowing

furrow.

14 Tyre packer The tyre packer ensures controlled and uniform recom-

pacting ahead of the coulters and serves as a chassis

for road transportation.

15 Left edge plate For a uniformly even working pattern, the edge plates

are standard and multi-adjustable on both sides .

16 Disc system (Disc harrow) The maintenance-free, rubber-mounted discs loosen

the entire soil surface.

17 Rolling cover Rolling cover made from tarpaulin fabric; dust and rain-

proof.

18 Front left warning sign with

side lights

Front position lights and warning signs, depending on

country of destination.

Layout and function

18 | Original Operating Instructions TERRASEM R3 FERTILIZER 8514.en80.V.2

Pos. Element Function

19 Radar sensor Speed measurement

20 Fan The hydraulically powered blowers provide the air flow

required for pneumatic seed delivery.

21 Right edge plate For a uniformly even working pattern, the edge plates

are standard and multi-adjustable on both sides .

Layout and function

8514.en80.V.2 Original Operating Instructions TERRASEM R3 FERTILIZER | 19

Layout and function

20 | Original Operating Instructions TERRASEM R3 FERTILIZER 8514.en80.V.2

Page is loading ...

Pottinger TERRASEM R3 FERTILIZER Operating instructions

Pottinger TERRASEM R3 FERTILIZER Operating instructions

Related papers

Other documents