Arduino MKR IoT Carrier Full Pinout

Arduino
Brand
Arduino
Model
MKR IoT Carrier
Type
Full Pinout
This work is licensed under the Creative Commons
Attribution-ShareAlike 4.0 International License. To view
a copy of this license, visit http://creativecommons.
org/licenses/by-sa/4.0/ or send a letter to Creative
Commons, PO Box 1866, Mountain View, CA 94042, USA.
Ground
Power
LED
Internal Pin
SWD Pin
Digital Pin
Analog Pin
Other Pin
Header Connector
Default
Last update: 24/11/2021
STORE.ARDUINO.CC/MKR-IOT-CARRIER
POWER LIMITS
Depends on the Board used
+5V
VIN
+3V3
GND
RESET
D14
D13
D12
D11
D10
D9
D8
D7
INT
BUZZER
COPI
SCK
CIPO
SDA
SCL
RELAY2
RELAY1
DISP_RST
D6
AREF
Power
D0
D1
D2
D3
D4
D5
D15A0
D16A1
D17A2
D18A3
D19A4
D20A5
D21A6
ABT461RC
BUZZER
D7
LED_SDI
LED_CKI
DL1-A
DISP_BL
DISP_CS
DISP_DC
SD_CS
GROVE_AN6
GROVE_AN5
TOUCH4
TOUCH3
TOUCH2
TOUCH1
TOUCH0
LPS22HB Pressure sensor
HTS221 Temperature sensor
APDS9306065 Light sensor
LSM6DSOX IMU sensor
NOTE: CIPO/COPI have previously
been referred to as MISO/MOSI
This work is licensed under the Creative Commons
Attribution-ShareAlike 4.0 International License. To view
a copy of this license, visit http://creativecommons.
org/licenses/by-sa/4.0/ or send a letter to Creative
Commons, PO Box 1866, Mountain View, CA 94042, USA.
Ground
Power
LED
Internal Pin
SWD Pin
Digital Pin
Analog Pin
Other Pin
Header Connector
Default
Last update: 24/11/2021
STORE.ARDUINO.CC/MKR-IOT-CARRIER
POWER LIMITS
Depends on the Board used
18650 Li-Ion 3.7 V
1
GROVE I2C
MKR Board
SCL
D12
2
SDA
D11
RLY_2
RELAY2
D13
GND
-BAT
VBAT
+BAT
3
+5V
4
GND
1
GROVE A5
GROVE_AN5
3
+5V
4
GND
A5 D20
1
GROVE A6
GROVE_AN6
3
+5V
4
GND
A6 D21
SD Card reader
3CMD/COPI D8
6CLK/SCK D9
7DAT0/CIPO D10
2CD/DAT3/SS D0
DL3-L2
RLY_1
RELAY1
D14DL2-L1
To supply with battery, plug the battery
connector over the MKR board to the
battery connector over the IoT Carrier
MAXIMUM voltage of 30V
for each Relay Connector
NOTE: CIPO/COPI have previously
been referred to as MISO/MOSI
This work is licensed under the Creative Commons
Attribution-ShareAlike 4.0 International License. To view
a copy of this license, visit http://creativecommons.
org/licenses/by-sa/4.0/ or send a letter to Creative
Commons, PO Box 1866, Mountain View, CA 94042, USA.
Ground
Power
LED
Internal Pin
SWD Pin
Digital Pin
Analog Pin
Other Pin
Header Connector
Default
Last update: 24/11/2021
STORE.ARDUINO.CC/MKR-IOT-CARRIER
POWER LIMITS
Depends on the Board used
BOTTOM
FH26W
1
LEDA
LV52204MTTBG
SW
3
LEDK
FB
10
CIPO
D10
29
COPI
D8
35
DISP_DC
D1
36
SCK
D9
37
DISP_CS
D2
38
DISP_RST
RESET
DISP_BL
5-SWIRE D3
IMU 6-AXIS
LSM6DSOX
9INT D6
13 SCL D12
14 SDA D11
SFV24R
24 LEDA
LV52204MTTBG
SW
23 LEDK FB
13 COPI D8
15 DISP_DC D1
16 SCK D9
17 DISP_CS D2
18 DISP_RST RESET
DISP_BL 5-SWIRE
D3
A0 D15
TOUCH1
Y1
A1 D16
TOUCH2
Y2
A2
TOUCH3
D17 Y3
A3D18
TOUCH4
Y4
A4D19
TOUCH5
Y5
The connector FH26W works
with the square LCD screen.
It is present in the Explore
IoT Kit version (AKX00027)
JAX133T-IF05
The connector SFV24R works
with the round LCD screen.
It is present in the Oplà IoT
Kit (AKX00026) and MKR IoT
Carrier (ABX00047) version.
KD013QVFMD002-01
X
Y
Z
NOTE: CIPO/COPI have previously
been referred to as MISO/MOSI
This work is licensed under the Creative Commons
Attribution-ShareAlike 4.0 International License. To view
a copy of this license, visit http://creativecommons.
org/licenses/by-sa/4.0/ or send a letter to Creative
Commons, PO Box 1866, Mountain View, CA 94042, USA.
Ground
Power
LED
Internal Pin
SWD Pin
Digital Pin
Analog Pin
Other Pin
Header Connector
Default
Last update: 24/11/2021
STORE.ARDUINO.CC/MKR-IOT-CARRIER
POWER LIMITS
Depends on the Board used
BOTTOM
L2
D13DL3-L2
L1
RLY_2
RELAY2
RLY_1
RELAY1 D14
D11
DL2-L1
1
SDA
D6 2
INT
D12 7
SCL
APDS9306065
Light sensor
D12 2
SCL
D6 3
INT
D11 4
SDA
HTS221
Temperature sensor
D12 2
SCL
D11 4
SDA
D6 7
INT1
LPS22HB
Pressure sensor
00 01 02 03 04
LED_CKI D4 CK0
LED_SDI D5 SDO0
CK1
SDO1
CK2
SDO2
CK3
SDO3
CK4
SDO4
00 01
04 03
02
NOTE: CIPO/COPI have previously
been referred to as MISO/MOSI
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4

Arduino MKR IoT Carrier Full Pinout

Arduino
Brand
Arduino
Model
MKR IoT Carrier
Type
Full Pinout
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents