WWW.ZIPPITY-OUTDOOR.COM
1
ASSEMBLY
INSTRUCTIONS ZP19024
WWW.ZIPPITY-OUTDOOR.COM
VER. 062221
ZP19024
ASSEMBLY
INSTRUCTIONS
5 HRS
Approximate assembly and installaon me
Want to see a video on how to
assemble this product?
Scan the QR code
OCEANSIDE
OUTDOOR VINYL
SHOWER KIT
WWW.ZIPPITY-OUTDOOR.COM
2
ASSEMBLY
INSTRUCTIONS
ZP19024
kCheck the inside of the larger pieces in your box for other
materials packed inside.
kWhen assembling components, place on a non-abrasive
surface (i.e. shipping box) to avoid scratching.
k
unobstructed assembling.
kYou should not need to use excessive force when assembling
components.
VISIT OUR WEBSITE FIRST,
SO WE CAN HELP YOU RIGHT AWAY!
Although great care has been taken to ensure proper packaging
and handling of this product, occasionally problems occur. If you
our website to order replacement parts. If you experience any
further trouble with your product, please contact our customer
service department.
parts.nychbrands.com
support@zippity-outdoor.com
704-892-5222 / 877-234-6196
Customer service agents are available to take calls weekdays from 9am-
5pm EST. If you call outside of business hours, please leave a voicemail.
To help you quickly and accurately, please have reference item
number ZP19024
on page 4. It is helpful if you can provide the batch lot which is a
stamped number inside the box.
this product, we are happy to assist you with the process, so
please give us a call at 704-892-5222 / 877-234-6196.
If for some reason you need to return this product, please
return the product, you will need to iniate the return from the
company you originally purchased from.
GENERAL
INFORMATION
MISSING
OR
DAMAGED
PARTS?
NEED
ASSEMBLY
HELP?
NEED TO
RETURN?
IMPORTANT
WWW.ZIPPITY-OUTDOOR.COM
3
ASSEMBLY
INSTRUCTIONS ZP19024
37 1/8 in
35 5/8 in
48 1/8 in
41 in
Top View
Side View
10 in
60 in
46 5/8 in
35 1/8 in
39 1/8 in
Front View
77 in
80 in
88 3/4 in
61 5/8 in
35 1/4 in
42 1/8 in
WWW.ZIPPITY-OUTDOOR.COM
4
ASSEMBLY
INSTRUCTIONS
ZP19024
STEP 1:
LAY OUT MATERIALS
Post A (1)
Post B (1)
Post C (1)
Post D (1)
Rail Bracket
Post Cap (4) Decorave
End Cap (4)
1¼” Self-Drilling Stainless
Steel Screw (46)
¾” Self-Drilling Stainless
Steel Screw
Shade Slat (9) Vinyl Weld
Glue (1)
O
P
N
MA
E
I
B
F
J
C
G
K
D
H
L
Privacy Board (6)
Horizontal Rail (4)
Beam (2)
U-Channel (4)
Shower Rod (2)
A
A
B
B
C
C
D
D
WWW.ZIPPITY-OUTDOOR.COM
5
ASSEMBLY
INSTRUCTIONS ZP19024
NOT INCLUDED WITH PURCHASE:
Sold Separately
For wood or concrete
surface mounng
For in-ground mounng Only needed if installed
on concrete
Only needed if installed
on wood
Only needed if installed
in ground
Sold Separately
(ZP19011) Zippity
Surface Mount
2-pack (2)
(ZP19012)
Zippity Post
Extension (1)
¼” x 3” Concrete
Wedge Anchor (16)
¼” x 4” Hex Head
Bolt w/ Nut and
Washer (16)
80 lb Concrete
Mix (2)
STEP 2:
INSTALLING MOUNTING ACCESSORIES
Concrete or wood surface mounng: Insert (4) Surface Mounts
(ZP19011)
mounts will be secured in the next step.
In-ground installaon: Insert (4) Post Extensions (ZP19012) into the
STEP 2.1A
STEP 2.1B
ZP19011
ZP19012
28”
WWW.ZIPPITY-OUTDOOR.COM
6
ASSEMBLY
INSTRUCTIONS
ZP19024
STEP 3:
INSTALL BRACKETS
STEP 3.1
STEP 3.2
Lay out Post A (A)(M) with the pre-drilled holes
(O).
(B), C (C), and D (D).
Ensure that the surface mount
(or post extension) is fully
inserted prior to securing the
brackets to post A.
A
D
C
B
O
M
WWW.ZIPPITY-OUTDOOR.COM
7
ASSEMBLY
INSTRUCTIONS ZP19024
Repeat step 4.1 for the rest of
the posts.
STEP 4:
INSTALL
STEP 4.1
STEP 5.1
STEP 4.2
STEP 5:
ASSEMBLE SIDE PANELS
H
N
Note: Push the horizontal rail
ght into the back of the rail
bracket. The screw head may
cause some diculty, but with
enough force, the horizontal
rail should pop into the rail
bracket.
Post B
Post A
K
1.(H) between the two
rail brackets. Ensure the open groove of the
U-channel is centered with the brackets.
2.
Screws (N) through the pre-drilled holes in the
U-channel.
1
2
1.(K) into the rail brackets.
Ensure the groove in the rail faces up.
2.
12
WWW.ZIPPITY-OUTDOOR.COM
8
ASSEMBLY
INSTRUCTIONS
ZP19024
Slide the middle privacy board in
STEP 5.2 STEP 5.3
Note: Make sure
the horizontal rail is
inserted fully over
the privacy boards
and rests inside the
rail brackets.
G
STEP 5.4
(G) into the horizontal
rail then insert the privacy board into the U-channel.
Angle the privacy board as illustrated. This will make
it easier to get the privacy board into the U-channel.
Insert the last privacy board in the same fashion.
1. Slide another horizontal rail down over the privacy boards.
2.
3. Repeat steps 5.1 through 5.4 to assemble the second wall panel.
Open groove
Open groove
WWW.ZIPPITY-OUTDOOR.COM
9
ASSEMBLY
INSTRUCTIONS ZP19024
STEP 6:
INSTALL SHOWER RODS AND BEAMS
(E) onto each
post as shown.
Slide (2) Shower Rods (L) into the
they hit the back wall of the posts.
STEP 7.1
STEP 6.1
STEP 7:
INSTALL POST CAPS
STEP 6.2
Apply a small amount of Vinyl Weld Glue (P) to the
(F)
STEP 7.2
L
E
Align
The side of the beam with (9) pre-drilled
holes should face up.
F
P
1. Slide (2) Beams (I) into the larger routed holes in the posts
2.
the pre-drilled holes in the posts to secure the beams.
I
12
WWW.ZIPPITY-OUTDOOR.COM
10
ASSEMBLY
INSTRUCTIONS
ZP19024
9” diameter
36” deep
A hammer drill will be needed for this step.
STEP 8:
SQUARE AND SECURE POSTS
Square the unit in the space where you plan to install your shower. The diagonal distance
between your posts must be equal for your unit to be square.
STEP 8.1
Surface Mount install:
concrete wedge anchors (NOT INCLUDED),
or similar sized lag screws (NOT INCLUDED) if
STEP 8.2A
Post Extension install: Mark the post
INCLUDED). Use support blocks to hold the
unit while the concrete cures.
STEP 8.2B
y
x
Note: If your concrete is not level, insert
galvanized steel washers under the lower side
of the surface mount unl it is level. Then,
secure the surface mount with wedge anchors.
WWW.ZIPPITY-OUTDOOR.COM
11
ASSEMBLY
INSTRUCTIONS ZP19024
STEP 9:
INSTALL SHADE SLATS
STEP 9.1
STEP 9.2
J
1.
Shade Slat (J)
2.
holes on each beam, and drive the screws in.
12
WWW.ZIPPITY-OUTDOOR.COM
12
ASSEMBLY
INSTRUCTIONS
ZP19024
WWW.ZIPPITY-OUTDOOR.COM
704-892-5222
877-234-6196
support@zippity-outdoor.com
6935 Reames Rd. Ste. K.
Charloe, NC 28216
/
