10 11
Bluetooth setup
Pairing a Bluetooth device for the first time
1. Turn on the unit by pressing the ‘Power’ button
2. The ‘Pairing Indicator’ will flash blue quickly
Note: When pairing, remain within 3 feet of the unit.
3. Using the controls on your Bluetooth device, select the ‘Podium’ in your Bluetooth settings to pair
Note: If your device requests a password, enter ‘0000’.
Note: Refer to your device’s user manual for instructions on pairing and connecting Bluetooth devices.
4. When successfully paired and connected, the ‘Pairing Indicator’ will display a solid blue light and the
unit will beep
Note: After initial pairing, the unit will stay paired unless it is unpaired manually by the user or erased
due to a reset of the device.
Note: If your device should become unpaired, follow the directions in the ‘Re-pairing or pairing new
devices’ section.
Re-pairing or pairing new devices
1. Turn on the unit by pressing the ‘Power’ button
2. Press and hold the ‘Pair’ button until the ‘Pairing Indicator’ flashes blue
Note: When pairing, remain within 3 feet of the unit.
3. Using the controls on your Bluetooth device, select ‘Podium’ in your Bluetooth settings to pair
Note: If your device requests a password, enter the default password ‘0000’.
Note: Refer to your device’s user manual for instructions on pairing and connecting Bluetooth devices.
4. When successfully paired and connected, the ‘Pairing Indicator’ will display a solid blue light and the
unit will beep
Note: After initial pairing, the unit will stay paired unless unpaired manually by the user or erased due to
a reset of the device.