1 1
kitsound.co.uk
JB. 3083 / Made in China. © KitSound
™
2014. Christchurch, Dorset. BH23 4FL
USER MANUAL
SLAM
WIRELESS SPEAKER
3
We are craftspeople. We are musicians. We are KitSound
™
And we all commit ourselves to achieving one shared goal: Bringing
people closer to their music. By truly understanding music we stay true
to its craft. Pure, rich, incredible sound. We’ll settle for nothing less.
4
At KS we believe your music deserves to be showcased on great
quality products that don’t cost the earth. We might not all share
the same taste in music (the ferocious disputes on music forums
prove that), but whether it’s Irish folk, death metal or any number
of obscure genres which seem to be multiplying by the minute, the
artists responsible for connecting with you through their craft have
bared their souls to do so. And we think that’s worth celebrating.
6 7
Like the musicians we’re honouring, we’re obsessed with our craft;
fine-tuning and tweaking our products to make sure we constantly
deliver full-bodied, symphonic sound. So from a single note played
on a piano, to the full impact of a bass guitar, you can rest assured
that you’ll always be doing justice to your music.
8 9
Please read this manual carefully before use.
Box contents
• Slam portable speaker
• Mains AC adaptor
• Aux cable
• User manual
Functions
On the front:
1. Power light (red/green)
2. Bluetooth light (blue)
3. Volume down button (
)
4. Volume up button (
)
5. Bluetooth/Play/Pause button (
)
6. Power button (
)
On the back:
7. DC 5 V input
8. Aux-in
9. USB 1 A output
10. Battery door
11. DC/BATT switch
Model no.: KSSLAM
Bluetooth speaker
DC Output: 5 V
DC input: 5 V / 3 A
Made in China
SLAM
1
7 9
2
11 8
3 4 5 6
10
Instructions for use
• Firstly, you will need to plug the Slam into the mains using the supplied power adaptor. Make sure the
mains plug is connected to the DC 5 V input (7)
• Alternatively, the Slam can be powered by 3 x C size batteries. Slide open the battery door and insert
the batteries, observing the correct polarity, then re-fit the battery door
• Please make sure the DC/BATT switch (11) is in the correct position depending on whether you wish
to use mains or battery power
• When you have finished using the Slam in battery mode, ensure you slide the switch to DC power,
otherwise the batteries will drain when not in use
Note: Please use only non-rechargeable C size batteries. Rechargeable C size batteries may not provide
a high enough voltage to power the Slam. Also, they cannot be recharged by the Slam.
10 11
Bluetooth setup
Pairing a Bluetooth device for the first time
With the mains plug connected and/or batteries inserted:
1. Press (don’t hold) the power button (6)
2. The power light (1) will turn from red to green and the Bluetooth light (2) will flash slowly
3. Press and hold the Bluetooth/Play/Pause button (5) for up to 5 seconds and the Bluetooth light (2)
will flash quickly
4. Using the controls on your Bluetooth device, select the ‘Slam’ in your Bluetooth settings to pair
Note: If your device requests a password, enter ‘0000’.
Note: Refer to your device’s user manual for instructions on pairing and connecting Bluetooth devices.
5. When connected, the Slam will beep and the Bluetooth light (2) will turn solid
Note: After initial pairing, the unit will stay paired unless it is unpaired manually by the user or
erased due to a reset of the device. If your device should become unpaired, follow the directions
in the ‘Re-pairing or pairing new devices’ section.
Re-pairing or pairing new devices
1. Make sure Bluetooth is turned off on any previously paired devices
2. Press (don’t hold) the power button (6) on the Slam
3. After 5 seconds, press and hold the Bluetooth/Play/Pause button (5) for up to 5 seconds and the
Bluetooth light (2) will flash quickly
4. Using the controls on your Bluetooth device, select the ‘Slam’ in your Bluetooth settings to pair
Note: If your device requests a password, enter ‘0000’.
5. When connected, the Slam will beep and the Bluetooth light (2) will turn solid
Using Bluetooth
Playing audio wirelessly
1. Follow the instructions in the ‘Pairing a Bluetooth device’ section
2. Use the controls on your device to select a track
3. To play, pause or skip the selected track, use the controls on your device or press the
Bluetooth/Play/Pause (5) button on the Slam
4. To skip a track, you will have to do so on your device
5. Audio played on the connected Bluetooth device will now be heard through the speakers
6. The volume can be adjusted on both your device and the Slam
12 13
Charging
Charging a device
1. Make sure the Slam is plugged into the mains, as this function will not work when using battery power
to operate the Slam
2. Using the appropriate USB charge cable, connect one end to the device and the other to the USB port
on the Slam
Note: The USB output is not suitable for use with any device that requires more than 1 amp to charge
3. Your device will now be charging
Aux audio input
Using the aux audio input
1. Plug one end of an aux cable (not included) into the aux input on the Slam
2. Plug the other end of the cable into the audio output/headphone output on an MP3 player
or other audio source
3. Press (don’t hold) the Power button (6) to turn the unit on (if not on already)
4. The power light will be green and the Bluetooth light (2) should not be flashing
5. Audio played on the connected device will now be heard through the speaker
6. The volume can be adjusted on both your device and on the Slam
Note: Any audio being played on a connected Bluetooth device will cease once the aux audio
source is connected.
Note: The play/pause function on the Slam will not operate in aux mode.
PLEASE NOTE:
Your device will have an internal amplifier and if it is playing digital files like MP3s it will also have
an integrated DAC (Digital Audio Converter). If you turn up the volume to 100%, your device will be
sending distorted signals to the Slam. To avoid this and to get the best sound quality from the speaker,
we recommend that you do not run your device any higher than 95% volume.
14 15
Specifications
Troubleshooting
We hope you’ve now got all the information you need to get started, but if you’re having problems
with anything, please feel free to contact us at: support
@
kitsound.co.uk
Bluetooth V2.1 A2DP, AVRCP
Bluetooth range up to 10 m
Aux input 3.5 mm
Output RMS 6 W x 2
Frequency response 100 Hz – 20 kHz
S/N 40 dB
USB output 1 A
DC input 5 V – 3 A
Battery type 3 x C size (1.5 V per cell)
Play time up to 20 hours (depending on battery)
We apologise for any inconvenience caused by minor inconsistencies in these instructions, which may occur as a result of
product improvement and development.
Care for your Slam
Please DON’T
• Get the Slam wet
• Drop the Slam as this will invalidate your warranty
• Open up the Slam. There are no user serviceable parts inside
• Use any other mains adaptor than the one supplied
• Expose the Slam to extreme temperatures or rapid changes of hot to cold or vice versa
Please DO
• Clean the Slam with a soft dry cloth and no detergents
-
1
-
2
-
3
-
4
-
5
-
6
-
7
-
8
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
Other documents
-
argon audio SOUL Owner's manual
-
iON Slam Jam Quick start guide
-
Creative ZIISOUND T6 - User manual
-
-
CONTINENTAL EDISON Enceinte HC-605M User manual
-
Nokia 130 User guide
-
-
ZoraBots JAMES User manual
-
CONTINENTAL EDISON CETB100B User manual
-
