TMI Products 55-57 Chevy Sedan Rear Seat Installation guide

Brand: TMI Products

Model: 55-57 Chevy Sedan Rear Seat

Type: Installation guide

Sedan Rear Seat Install

A professional is recomened for

all TMI Products installs

Chevy Bel Air 55-57

Tools needed:

Page 1

PN 99-0157-000

QP 09-329 Rev. 01

Step 1: Installing the back rest of your rear seat. The back rest attaches

with rear substrait hooks (pointed out with arrows in Picture 1)

You will have to hook the seat onto the hooks at an angle

then lower the backrest into position using a hinge type of motion.

Step 2: Screwing in the backrest. Once the backrest is in and laying on

rear seat sub structure you will run the self tapping screws into the rear

seat tabs. The screws go through two tabs located on the bottom of the

backrest this is what will hold seat in place.

1

2

DRILL

Rear Seat Install

A professional is recomened for

all TMI Products installs

Chevy Bel Air 55-57

Page 2

Step 3: Installing the bottom of your rear seat. For this step

you will need to note key features on your oor pan and

rear seat bottom. On the oor pan note the two holes that

are circled in picture 3A. On the bottom rear seat look at

the underside and note the bottom mount tabs

underneath illustrated in picture 3B.

Then follow Picture 3C. Slide the bottom of your rear seat

into place. This will take alot of moving and shifting of the

rear seat bottom as it is a tight t. You will push the rear seat

bottom all the way in untill you feel the previously mentioned

posts (3B) fall into the oor pan holes (3A).

3A

3B

3C

1
2

TMI Products 55-57 Chevy Sedan Rear Seat Installation guide

Brand: TMI Products

Model: 55-57 Chevy Sedan Rear Seat

Type: Installation guide

Download PDF

Related papers

Other documents