FireWire & USB Combo Drive Enclosure
Installation Guide
No. 42758
© LINDY ELECTRONICS LIMITED & LINDY-ELEKTRONIK GMBH - FIRST
EDITION (
FireWire & USB Combo Drive Enclosure
English
EDITION (
DECEMBER 2010)
Specification
• Internal Connection: SATA I/II 22 Pin Data & Power
• External Connectors: FireWire 800, FireWire 400 & USB 2.0
• Aluminium housing and 40mm Fan for heat dissipation and
cooling
Package Contents
• FireWire & USB Combo Drive Enclosure for 3.5” SATA
Drives
• Plastic Stand
• USB 2.0 Cable – 1m
• FireWire 800 Cable – 1.5m
• FireWire 400 Cable – 1.5m
• Philips Screwdriver
• 12V ≥2A UK Power Supply
Installation
1. Remove the two screws from the back panel
2. Slide the back panel out of the enclosure to reveal the drive
tray
3. Place your HDD into the tray, and then slide it into position
so that the SATA connection is made between the HDD and
the 22 Pin SATA interface
4. The screw holes on the underside of your HDD will be
aligned to the slots in the tray. Use the supplied screws to
attach your HDD to the tray
5. Slide the tray back into the enclosure and fix it in position
using the screws which were previously removed
6. The enclosure is now ready to be used, simply connect the
supplied power supply and your choice of computer
connection cable
Important Note:
Only one of the available connections may be connected/used
at a time. Connection of multiple interfaces will result in the
failure of this enclosure and void your warranty
3
4
Certifications
CE Statement
This equipment complies with the relevant EC
IT Equipment
Recycling Information
WEEE (Waste of Electrical and Electronic Equipment),
Recycling of Electronic Products
In 2006 the European Union introduced regulations (WEEE) for
the collection and recycling of all waste electrical a
electronic equipment. The Wheelie bin symbol shown indicates
that this product must not be disposed of with household
waste. Instead the product must be recycled in a manner that
is environmentally friendly. For more information on how to
dispose of thi
s product, please contact your local recycling
centre or your household waste disposal service. Each
individual EU member state has implemented the WEEE
regulations into national law in slightly different ways. Please
follow your national law when you want
to dispose of any
electrical or electronic products.
LINDY No. 42758
www.lindy.com
This equipment complies with the relevant EC
Regulations for
WEEE (Waste of Electrical and Electronic Equipment),
In 2006 the European Union introduced regulations (WEEE) for
the collection and recycling of all waste electrical a
nd
electronic equipment. The Wheelie bin symbol shown indicates
that this product must not be disposed of with household
waste. Instead the product must be recycled in a manner that
is environmentally friendly. For more information on how to
s product, please contact your local recycling
centre or your household waste disposal service. Each
individual EU member state has implemented the WEEE
regulations into national law in slightly different ways. Please
to dispose of any
LINDY No. 42758
www.lindy.com
/
