2. Computers & electronics
  3. Computer components
  4. Chassis components
  5. HDD/SSD enclosures
  6. Lindy
  7. 20966

Lindy 20966 User manual

  • Hello, I am a chat assistant and I've read the LINDY user manual for the Multimedia Storage Box 20966. This user manual describes features of the storage box, such as fitting in any 5.25” bay, accommodating a 12.7mm slim optical drive, and a 2.5” SATA HDD (9.5mm height). I see it also has 2 USB ports, and it has tool-less design. I am ready to answer your questions.
  • What type of optical drive does this storage box accommodate?
    What is the maximum height of the 2.5" HDD that can be installed?
    What kind of ports are included in the storage box?
    What interfaces are used for the optical drive?
    What kind of interface is used for the 2.5" HDD?
© LINDY ELECTRONICS LIMITED & LINDY-ELEKTRONIK GMBH - FIRST EDITION (May 2011)
Multimedia Storage Box
User Manual English
LINDY No. 20966
www.LINDY.com
Features
• Fits in any 5.25” bay
• Accommodates 12.7mm Slim Optical Drive
• For use with a 2.5” SATA HDD (9.5mm height)
• 2 additional USB 2.0 ports
• Tool-less, screw-less and tray-less 2.5” HDD enclosure
• Interfaces: SATA/PATA for Slim ODD, SATA for 2.5” HDD
• Extremely efficient use of space, provides multiple functions in a single unit
• Material: metal with black, plastic front panel design
• LED indicators on front panel: Blue (ON when power cable is connected and hard drive is
installed) and orange LED (flashes when reading/writing data)
Package Contents
• Multimedia Storage Module
• SATA data cable
• SATA power cable
• Mounting screws
• This manual
Installation
Push the 12.7mm slim optical drive into the slim drive bay.
Then use a magnetic screwdriver to secure 2 screws to
the optical drive.
Place the Multimedia Storage Box into an available 5.25”
bay and fix it with screws.
English Manual English 3
Connection
1. Connect the SATA power cable (SATA 15pin and
4pin LED wire connector) to the back of the module
and the four pin 5.25" power connector to your
computer.
2. Connect the SATA 7pin data cable to the back of the
module and to your computer’s motherboard or
SATA Raid Card.
3. Connect your optical drive’s data cable (SATA or
PATA, not included!) and power cable into your
motherboard and power supply.
4. Connect the internal USB cable connector to the
motherboard and power supply.
Inserting the 2.5” Hard Drive
Pull the key of the 2.5” HDD
gently from left to the right to
eject the panel.
Put the 2.5” HDD into the module, with the SATA port facing
the back of the enclosure.
Close the front panel.
English Manual English 4
Removing the Hard Drive
Pull the key from left to right to eject the panel and take out the 2.5” hard drive.
Do not eject the hard drive while it is busy!
Herstellergarantie
LINDY gewährt für dieses Produkt über die gesetzliche Regelung hinaus eine zweijährige Herstellergarantie ab
Kaufdatum. Die detaillierten Bedingungen dieser Garantie finden Sie auf der LINDY Website aufgelistet bei den
AGBs.
LINDY No 20966
1st Edition, May 2011
www.lindy.com
/