Page is loading ...
DOUBLE ROW WHEEL WELL
AURA PRO
TM
INSTALLATION GUIDE
AURA BLUETOOTH CONTROL BOX
LIGHT STRIPS
HARDWIRE POWER HARNESS
MOUNTING KIT
ZIPTIES Y-SPLITTERS
VARIOUS EXTENSION WIRES FUSE TAPSCIGARETTE LIGHTER POWER SUPPLY
V1.4 022021
COMPONENTS
Inspect kit to ensure all contents was included.
STEP 1
OPTION A
OPTION B
AUXILIARY WIRE EXTENSION WIRE
AUXILIARY WIRE EXTENSION WIRE
Decide where to locate the
light strips and ensure wiring
has enough length for
control box to be installed in
desired location
STEP 2
FUSE
BOX
GROUND
(+)
(-)
INSTALLATION
INSTALLATION
Scan the QR code on the back of the
control box to download the app.
STEP 3
Secure Control box in desired
location with Velcro or zipties.
* The control box is NOT waterproof.
Tuck it away from the elements.
Clean the area where the light strip will be
mounted. The brake rotor dust cover is a
commonly used installation area.
STEP 4
CONNECTED
ON
WHITE
RANDOM
BRIGHTNESS
SOLID
DOOR
ASSIST
OFF
Secure the light strips using the
zip ties to tie all the wiring away
from the moving components.
STEP 5
Open the OPT7 AURA App, pair
your smart device to the control
box, and pick your desired color!
STEP 6
* IMPORTANT:
The LED connectors are not waterproof.
You will need to use HEAT SHRINK TUBE
(not included) or ELECTRICAL TAPE
around the LED connectors to ensure
the longevity of the lighting kit.
Heat Shrink Tube
1
2
DISCLAIMER
Scan for tutorial videos, troubleshooting tips,
and more.
Colors
Modes
Door Assist
Support
Ability to control up to
4 devices at once
-
-
-
-
-
QR Code to download
OPT7 Lighting is not liable for damages or personal injuries while
installing this product. The Installation Guide is intended as assistance
to reduce setup time. OPT7 Lighting assumes no responsibility for
improper installation.
If you are unfamiliar with your vehicle or inexperienced with
aftermarket upgrades, please seek professional assistance.
OPT 7 AURA APP
NEED SUPPORT?
You may choose the desire color choice directly on the Aura app.
* NOTE: Trigger wire for door light is recommended if your dome light lights up progressively
when opening door.
This feature will activate when the aux wiring is connected to the
trigger wire for door light or positive wire of dome light.
AUX WIRING FOR A DOOR/DOME LIGHT
/
