Kamstrup Valve Quick start guide

Brand: Kamstrup

Model: Valve

Type: Quick start guide

Below you will find brief information for Valve, Meter. This document provides a quick guide for installing Kamstrup Valve and Meter. The guide includes steps for unpacking, assembling, and installing unit and checking the installation. Note: assemble meter and valve as a unit. The installation includes mounting the coupler on the meter, inserting the gasket, and then mounting the valve on the meter. It covers correct and incorrect placements, with the valve not to be installed in the inlet. The final step involves checking the installation and opening the water supply by pushing a button three times to open the valve.

Below you will find brief information for Valve, Meter. This document provides a quick guide for installing Kamstrup Valve and Meter. The guide includes steps for unpacking, assembling, and installing unit and checking the installation. Note: assemble meter and valve as a unit. The installation includes mounting the coupler on the meter, inserting the gasket, and then mounting the valve on the meter. It covers correct and incorrect placements, with the valve not to be installed in the inlet. The final step involves checking the installation and opening the water supply by pushing a button three times to open the valve.

Install the unit in the installation 3

Check the installation 4

Kmsrup Vlve

Insllion quick guide

Kmstrup

kmstrup.com · info@kmstrup.com

Kmstrup A/S • 55122215_A1_GB_02.2018

Think forward

Kamstrup A/S

Industrivej 28, Stilling

DK-8660 Skanderborg

T: +45 89 93 10 00

F: +45 89 93 10 01

[email protected]

kamstrup.com

Preconditions – Unpack the valve 1.1

1

1

2

NOTE! Assemble meter and valve as a unit 2

Meer

Preconditions – Check list 1.2

Vlve

SpnnerCoupler

Gske

Quick Guide Installation Steps

NOTE! Assemble meter and valve as a unit 2

Preconditions 1

3

2.11st: Mount the coupler on the meter

Buckle clockwise

2

Moun he prsFind he prs

Insll uni in insllion Tighen

mx. 30 Nm

2nd: Insert the gasket in the coupler 3rd: Mount the valve on the meter2.2 2.3

Buckle meer

clockwise

Tighen

mx. 30 Nm

1

1

2

32

Check the installation 4

Install the unit in the installation

Install the unit in the installation

3.1

3.2

21

1

Insllion is complee Push he buon 3 imes Vlve is closed

Vlve is open

Open for wer supply

www.kmsrup.com

Vlve is in process of opening

2

3

Insll he uni in he

following posiions. Roe

360 degrees s desired.

goo.gl/nUGsYV

Red more bou he ge-

nerl direcions regrding

insllion of Kmsrup

wer meers.

Use QR or URL bove.

Insll ccording o ﬂow direcion

Do no insll he vlve in he inle

Correc plcemen in insllion Wrong plcemen in insllion

Wrong plcemen in insllion Wrong plcemen in insllion

1
2

Kamstrup Valve Quick start guide

Brand: Kamstrup

Model: Valve

Type: Quick start guide

Below you will find brief information for Valve, Meter. This document provides a quick guide for installing Kamstrup Valve and Meter. The guide includes steps for unpacking, assembling, and installing unit and checking the installation. Note: assemble meter and valve as a unit. The installation includes mounting the coupler on the meter, inserting the gasket, and then mounting the valve on the meter. It covers correct and incorrect placements, with the valve not to be installed in the inlet. The final step involves checking the installation and opening the water supply by pushing a button three times to open the valve.

Download PDF

Related papers