2. JasonL
  3. 8020ME

JasonL 8020ME, MY-OE-03SB, MY-OE-PB Operating instructions

  • Hello! I've reviewed the user manual for the Planter Box. This document provides detailed assembly instructions, including hardware information and notes on the correct orientation of panels. I'm ready to answer your questions about the assembly process or any other aspect of the planter box.
  • What should be the orientation of the bottom panel?
    Where should the screw holes be visible after assembly?
    How to lock the Minifix cam?
Planter
Box
TOP PANEL
Qty : 1 pc
BASE PANEL
Qty : 1 pc
FRONT PANEL
Qty : 1 pc
SIDE PANEL L
Qty : 1 pc
SIDE PANEL R
Qty : 1 pc
BACK PANEL
Qty : 1 pc
1 2
34
5
6
1
2
3
4
5
6
Components:
Hardware:
Assembly instruction
Step 1.
Assemble component follow sequence number
Note:
The bottom panel
should be facing down.
Screws holes must be seen
from the outside only.
Bottom view
Step 2.
Insert collar stud into boring hole
Complete
assembly
Collar Stud
262.24.710
4 pcs
Minifix Steel
Bolt 10259
16 pcs
Note For Minifix Cam
Important: Function of Klix cam
1/4 RIGHT TURN FOR
LOCKING Make Sure The Arrow Is Pointing
Upwards Before Inserting Into The Panel's Hole
DECO-CAP
16x5
16 pcs
Insert Collar Stud
into Boring Hole
/