Safety Warnings
• Don’t disassemble the keyboard or remove any parts.
• Don’t put the keyboard into water or any liquid.
• Don’t use the keyboard close to heat sources or expose to high
temperatures.
• Don’t use the keyboard where strong electromagnetic waves are
present. Strong electromagnetic waves will cause damage to the
keyboard.
• Keep the keyboard away from direct sunlight, moisture, dirt or
abrasive chemical products (cleaning products etc).
Wireless Devices:
Before boarding any aircraft or packing a wireless device in luggage
that will be checked, remove the batteries from the wireless device.
Wireless devices can transmit radio frequency (RF) energy, whenever
batteries are installed and the wireless device is turned on (If it has an
On/O switch).
Battery-Powered Devices:
Improper use of batteries may result in battery uid leakage,
overheating, or explosion.
Released battery uid is corrosive and may be toxic. It can cause skin
and eye burns, and is harmful if swallowed.
To Reduce the Risk of Injury:
• Keep batteries out of the reach of children.
• Do not heat, open, puncture, mutilate, or dispose of batteries in re.
• Do not mix new and old batteries or batteries of dierent types.
• Do not allow metal objects to touch the battery terminals on the
device; they can become hot and cause burns.
Unpacking
Remove all packaging from the unit. Retain the packaging.
If you dispose of it please do so according to local
regulations.
The following items are included:
• Keyboard
• Dongle
• USB Charging Cable
• Instruction Manual
Thank you for purchasing your new
Sandstrøm Keyboard.
We recommend that you spend some time reading
this instruction manual so that you fully understand
all the operational features it oers. You will also
nd some hints and tips to help you resolve any
issues.
Read all the safety instructions carefully before
use and keep this instruction manual for future
reference.
Charging the Keyboard
Your keyboard will need charging before you can use it.
1. Connect the USB charging cable to the keyboard.
2. Connect the other end of the USB charging cable to a
powered USB device.
3. The charging indicator light will switch on to show the
keyboard is charging. The indicator light will turn o
when the keyboard is fully charged.
If the indicator starts to ash the battery power is getting
low. Charge the keyboard as shown above.
Connecting the USB Dongle
1. Plug the dongle directly and fully into your computer’s
USB port.
2. Switch the ON/OFF button on the bottom of the
keyboard to the ON position.
3. Adjust the angle of the keyboard by lifting the feet.
Instruction Manual
Wireless Touchpad
Keyboard
SMEDIAKB
SMEDIAKB_IB_RC_140805_Zell.indd 2-5 5/8/14 6:14 pm