Wireless Mouse
SMOUWIN8
UNPACKING
INSTALLING THE BATTERY
ACTIVATING THE WIRELESS MOUSE
CONNECTING THE NANO RECEIVER
SYSTEM REQUIREMENTS
PRODUCT OVERVIEW
Switch the ON/OFF switch to ON, the mouse will automatically activate. This
could take a few seconds.
Thank you for purchasing your new Sandstrøm Wireless Mouse.
Before commencing the installation and set up, please check that you have all the items
and familiarise yourself with this Quick Start Guide.
Mouse
Nano Receiver
1. Press and lift the
battery cover.
2. Insert
1 x AA battery
3. Close the battery
cover.
Remove all packaging from the unit. Retain the packaging. If you dispose of it, please
do so according to local regulations.
The following items are included:
If items are missing, or damaged please contact Partmaster (UK only).
Tel: 0844 800 3456 for assistance.
Operating Systems: Microsoft
®
Windows
®
2000/ XP/ Vista™ / 7 (4 button function-
ality only) & Windows
®
8
Hardware: 1 available USB port
To save energy, switch the ON/OFF switch
to the OFF position to turn o the mouse.
Quick Start Guide
Instruction manual
1 x AA Size Battery
Right Button
Left Button
Scroll Wheel
App Button
Charm Button
Scroll up or down to view a
page on the internet browser.
Press to scroll through
all open Apps
®
(Windows 8 only)
Press to view the Charm menu
OFF
ON
Connect
Nano Receiver
Connect Button
ON/OFF Switch
Battery Cover
Please ensure the battery’s polarities(+/—) match the battery compartment’s polarities.
Plug the Nano Receiver directly
into your computer’s USB port.
It will install a mouse and keyboard driver.
You need both for your mouse to function
properly.
The Nano Receiver
can be found
in the battery
compartment.
OFF
ON
Connect
OFF
ON
Connect
SMOUWIN8_QSG_130112_Pauline.pdf 1 12/01/2013 6:06 PM
HINTS AND TIPS SAFETY WARNINGS
Mouse Not Working:
1. Check that the power switch is in the ON position.
2. Make sure the Nano Receiver is plugged into a USB port and the computer is on
or try the Nano Receiver in a dierent USB port.
3. Check battery installation. Replace battery if needed.
4. If mouse performance is slow or intermittent around a wireless network, unplug
the Nano Receiver from the USB port and then reinsert it. To reactivate the
mouse, switch it on, o and on again using the ON/OFF switch on the bottom
of the mouse.
5. Repeat the connection procedure. You can also try moving the mouse closer to
the Nano Receiver.
6. The mouse has lost connection, press the CONNECT button to reconnect it.
7. If the mouse is moving erratically change the working surface which the mouse
is operating on.
8. If the APP and CHARM buttons are not working, remove the dongle, then plug it
back in.
To Reduce the Risk of Injury:
•
Keep batteries out of the reach of children.
•
Do not heat, open, puncture, mutilate, or dispose of batteries in re.
•
Do not allow metal objects to touch the battery terminals on the device; they can
become hot and cause burns.
•
Never point the optical sensor toward the face, particularly the eyes, to avoid
possible injury.
•
While the mouse is functioning, optical light is visible to the naked eye.
•
Avoid looking directly into the emitter hole while the mouse is active.
Wireless Devices:
Before boarding any aircraft or packing a wireless device in luggage that will be
checked, remove the batteries from the wireless device.
Wireless devices can transmit radio frequency (RF) energy, whenever batteries are
installed and the wireless device is turned on (If it has an On/O switch).
Battery-Powered Devices:
Improper use of batteries may result in battery uid leakage,
overheating, or explosion.
Released battery uid is corrosive and may be toxic. It can cause skin and eye
burns, and is harmful if swallowed.
Features and specications are subject to change without prior notice.
Windows is a registered trademark of Microsoft Corporation in the United
States and other countries.
DSG International Sourcing declares that the wireless mouse comply with
the essential requirements and other relevant provisions of Directive
1999/5/EC.
Visit Partmaster.co.uk today for the easiest
way to buy electrical spares and accesso-
ries. With over 1 million spares and
accessories available we can deliver direct to your door the very
next day. Visit www.partmaster.co.uk or call 0844 800 3456 (UK
customers only) Calls charged at National Rate.
This symbol on the product or in the instructions means
that your electrical and electronic equipment should be
disposed at the end of its life separately from your
household waste. There are separate collection systems
for recycling in the EU. For more information, please
contact the local authority or your retailer where you
purchased the product.
(QSG-SMOUWIN8-130112V1)
• Your product complies with CE rules.
•
This product has no serviceable parts. Use of controls
or adjustments of procedures other than the Quick
Start Guide may result in danger.
•
While the mouse is functioning, the LED beam is not
visible to the naked eye. Avoid looking directly into
the emitter hole while the mouse is active.
DSG Retail Ltd. (co. no. 504877)
Maylands Avenue, Hemel Hempstead, Herts., HP2 7TG, UK
SMOUWIN8_QSG_130112_Pauline.pdf 2 12/01/2013 6:06 PM
-
1
-
2
