7
Activating the Wireless Mouse
Switch the ON/OFF button to
power on the mouse and then
the mouse will automatically
connect to the Nano Dongle
plugged into your computer.
• If the mouse does not use for a long period,
switch the ON/OFF switch into the OFF
position to conserve energy.
• The mouse switches o if a transmission
signal is no longer received. If necessary,
remove the nano dongle and insert it in the
dongle dock on the bottom of the mouse
as the dongle is very small and can be
easily lost.
Energy Saving
If the mouse is not activated for approx. 3 seconds, it
switches to energy saving mode with a current ow of
up to 0.3 mA. After 10 minutes of no activity, the LED
switches o and the current ow drops to 0.03 mA. To
wake up the mouse, press any button.