Midmark Integra™ Operatory Cabinetry - Side Cabinetry Installation guide

Integra™ Operatory Cabinetry - Side Cabinetry
Midmark
Brand
Midmark
Model
Integra™ Operatory Cabinetry - Side Cabinetry
Type
Installation guide

Midmark Integra™ Operatory Cabinetry - Side Cabinetry offers versatile storage solutions for your dental operatory. With its durable construction, adjustable shelves, and a variety of cabinet options, it provides ample storage space for instruments, supplies, and patient files. The cabinetry's sleek design and seamless integration with other Midmark products create a cohesive and efficient workspace. It enhances organization, streamlines workflow, and improves overall productivity in your dental practice.

Midmark Integra™ Operatory Cabinetry - Side Cabinetry offers versatile storage solutions for your dental operatory. With its durable construction, adjustable shelves, and a variety of cabinet options, it provides ample storage space for instruments, supplies, and patient files. The cabinetry's sleek design and seamless integration with other Midmark products create a cohesive and efficient workspace. It enhances organization, streamlines workflow, and improves overall productivity in your dental practice.

1
DA2159i
3.25"
(8.3 cm)
3" [min]
(7.6 cm)
PENCIL
MARK
EDGE OF
CEILING
HANGER
BRA
CKET
DESIRED HEIGHT
OF CABINET
(MUST BE
AT LEAST
3" FROM CEILING)
SHIM
EDGE OF
FLOOR
1.63"
(4.1 cm)
DA2158i
003-1941-00 Rev.A
12” 15” 18” 24” 30” Upper Storage Unit Installation
Applies to Models:
OUC (012, 015, 018)
OUC (024, 030)
Special Tools:
Level
Stud Finder
Step 1: Measure up 71 1/2”
(181.6 cm) from
highest point on floor.
Step 2: Measure down 1.63” (4.1cm) from
71 1/2” (181.6 cm) mark. Using a
level, mark a line along the entire
length of the storage unit.
Step 3: Align bottom of bracket
with mark. Secure with
appropriate hardware
using shims if necessary.
Note
If necessary to form bracket to
wall, use double-sided tape
and shims behind bracket.
Note
Midmark recommends
that bottom of cabinet
should be 18” (45.7 cm)
above counter top.
OUC012 (12” Upper Storage Unit)
OUC015 (15” Upper Storage Unit)
OUC018 (18” Upper Storage Unit)
OUC024 (24” Upper Storage Unit)
OUC030 (30” Upper Storage Unit)
NextNext
2
DA2161i
2.5 in
(6.4 cm)
Attaching Additional Upper Storage Unit
Step 1: Measure over 2.5” (6.4 cm)
from side of storage unit
and place a mark.
Step 2: Position mounting bracket as
shown. Level and secure to wall
as described on previous page.
Step 3: Place unit on bracket and
connect using special hex bolts.
Special hex bolts
(#10-24 X 3/4”)
NextNext
BackBack
3
DA2160i
DOOR ADJUSTMENT / SHELF INSTALLATION
Vertical Adjustment
A) Loosen both screws.
B) Move up or down.
C) Retighten screws.
Horizontal Adjustment
A) Turn cam screw to move
panel side to side.
Depth Adjustment
A) Turn cam screw to move
panel front to back.
Shelf Installation
Install shelf brackets and
shelves in desired locations.
Note
Doors should be adjusted for the
gap specified on the illustration.
NextNext
BackBack
4
BackBack
Midmark Corporation
For contact information, go to:
www.midmark.com
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4

Midmark Integra™ Operatory Cabinetry - Side Cabinetry Installation guide

Integra™ Operatory Cabinetry - Side Cabinetry
Midmark
Brand
Midmark
Model
Integra™ Operatory Cabinetry - Side Cabinetry
Type
Installation guide

Midmark Integra™ Operatory Cabinetry - Side Cabinetry offers versatile storage solutions for your dental operatory. With its durable construction, adjustable shelves, and a variety of cabinet options, it provides ample storage space for instruments, supplies, and patient files. The cabinetry's sleek design and seamless integration with other Midmark products create a cohesive and efficient workspace. It enhances organization, streamlines workflow, and improves overall productivity in your dental practice.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents