Hampton Bay HBF1129P-258 Operating instructions

Brand: Hampton Bay

Model: HBF1129P-258

Type: Operating instructions

Hampton Bay HBF1129P-258 is a one-light outdoor wall lantern with a clear seeded glass shade that brings charm and character to your outdoor space. It features a rust-resistant aluminum frame with a handsome bronze finish, making it a durable and stylish addition to your home. The clear seeded glass shade adds a touch of elegance, while allowing light to shine brightly, creating a warm and inviting ambiance. This wall lantern is ideal for illuminating entryways, patios, and other outdoor areas, providing both style and functionality.

INSTRUCTIONS MANUAL

FLUORESCENT CEILING FLUSH MOUNT FIXTURE

Page 1

HOME DEPOT SKU# 286-792 (UPC# 046335949768)

Page 2

Thank you for purchasing this Hampton Bay Fluorescent Ceiling Flush

Mount Fixture. This product has been manufactured with the highest

standards of safety and quality.

FEATURES:

Before returning to your local Home Depot, please call our Customer

Service Team at 1-877-527-0313 or visit www.homedepot.com. Please

reference your SKU (286-792) or UPC (046335949768).

QUESTIONS, PROBLEMS, MISSING PARTS:

1. Easy to install.

2. Handsome Sienna finish with Alabaster acrylic lens.

Page 3

CAUTION:

1. Before starting installation of this fixture or removal of a previous

fixture, disconnect the power by turning off the circuit breaker or by

removing the fuse at the fuse box.

2. CONSULT A QUALIFIED ELECTRICIAN IF YOU HAVE ANY

ELECTRICAL QUESTIONS OR NEED TO REPLACE THE

BALLAST. If you have any non-electrical questions about this

fixture, please call our Customer Service Team at 1-877-527-0313 or

visit www.homedepot.com. Please reference your SKU (286-792) or

UPC (046335949768).

3. KEEP your receipt and these Instructions for Proof of Purchase.

TOOLS REQUIRED FOR INSTALLATION AND ASSEMBLY (not

included):

Safety

goggles

Wire

strippers

Phillips

screwdriver

Electrical

tape

Wire

cutters

Flathead

screwdriver

PARTS INCLUDED FOR ASSEMBLY (parts are not to scale):

ASSEMBLY INSTRUCTIONS:

1 ea Fixture Pan (#1)

1 ea 22 W Fluorescent

Light Bulb (#2)

1. Carefully unpack the fixture. Lay out all parts on a clean surface.

2. Before continuing Assembly, please proceed to the Installation Instructions.

3. Connect the provided 22 W Fluorescent Light Bulb (#2) to one of the Ballast

Lamp Connectors (#4). Connect the provided 32 W Fluorescent Light Bulb

(#3) to the remaining Ballast Lamp Connector (#4). Attach the 22 W

Fluorescent Light Bulb (#2)to the Fixture Pan (#1) by snapping it into the

provided Lamp Clips (#5). Similarly, attach the 32 W Fluorescent Light Bulb

(#3) to the Fixture Pan (#1) using the remaining Lamp Clips (#5). (Fig. 1)

4. Slide the Diffuser (#17) onto the Fixture Pan (#1) making sure the open ends

of the Recessed Grooves (#18) of the Diffuser (#17) align with the Groove

Pins (#19) of the Fixture Pan (#1). Turn the Diffuser (#17) clockwise to lock

it onto the Fixture Pan (#1). (Fig. 2)

1 ea 32 W Fluorescent

Light Bulb(#3)

1 ea Diffuser (#17)

Page 4

ASSEMBLY:

Page 5

17. Diffuser

5. Lamp

Clips

2. 22 W Fluorescent

Light Bulb

3. 32 W Fluorescent

Light Bulb

4. Ballast Lamp

Connector

1. Fixture Pan

18. Recessed

Groove

19. Groove Pin

Fig. 1

Fig. 2

PARTS INCLUDED FOR INSTALLATION (parts are not to scale):

INSTALLATION INSTRUCTIONS:

3 ea Wire Nuts (#10) 2 ea Mounting Screws (#8)

1. Thread the Mounting Screws (#8) into the Outlet Box (#6) so that they extend

approximately ½” below the Ceiling (#7). (Fig. 3)

2. Pull the power supply wires out from the Outlet Box (#6). Attach the Black

Supply Wire (#14) to the Black Fixture Wire (#15) and the White Supply

Wire (#9) to the White Fixture Wire (#11) using Wire Nuts (#10). Connect

the Fixture Ground Wire (#12) and the Supply Ground Wire (#13) together

using a Wire Nut (#10). (Fig. 3) Wrap all wire connections with electrical

tape for a more secure connection. Note: If you ha ve electrical questions,

consult your local electrical code for approved grounding methods.

3. Carefully, tuck all the wires and wire connections into the Outlet Box (#6).

Place the Fixture Pan (#1) over the Outlet Box (#6) and onto the Mounting

Screws (#8), making sure they feed through the Keyhole Slots (#16). (Fig. 4)

4. Slide the Fixture Pan (#1) in a direction, such that the Mounting Screws (#8)

slide into the narrow ends of the Keyhole Slots (#16). Tighten the Mounting

Screws (#8) so that the Fixture Pan is secured flush against the Ceiling (#7).

(Fig. 5 and 5-1)

5. Proceed to Step 3 of the Assembly Instructions.

6. Installation is complete. Turn on power at the circuit breaker or fuse box.

Turn the light switch on to activate the fixture.

Page 6

Page 7

INSTALLATION:

11. White Fixture Wire

12. Fixture Ground Wire

10. Wire Nut

9. White Supply

Wire

14. Black Supply Wire

13. Supply Ground Wire

8. Mounting Screw

15. Black Fixture Wire

6. Outlet Box

7. Ceiling

1. Fixture Pan

Fig. 3

INSTALLATION (CONT.):

6. Outlet Box

8. Mounting Screw

1. Fixture

Pan

6. Outlet Box

1. Fixture

Pan

8. Mounting

Screw

16. Keyhole

Slot

8. Mounting

Screw

16. Keyhole

Slot

Bottom View

7. Ceiling

Fig. 4

Fig. 5

Fig. 5-1

Page 8

Possible Cause Corrective Action

1. Power is off. 1. Make sure power supply is on.

2. Faulty switch. 2. Test or replace switch.

3. Faulty wire connection. 3. Check wiring.

Fuse blows or circuit breaker

trips when light is turned on.

1. Crossed wires or power wire is grounding

out.

1. Check wire connections.

Light will not turn on.

TROUBLESHOOTING:

PRODUCT MAINTENANCE:

1. To clean the outside of the fixture, use a dry or slightly dampened clean cloth (use clean

water, never a solvent) to wipe the surface of the fixture.

2. To clean the inside of the fixture, first disconnect power to the fixture by turning off the

circuit breaker or by removing the fuse at the fuse box. Next, use a dry or slightly

dampened clean cloth (use clean water, never a solvent) to wipe the interior surface of the

fixture.

3. Do not use any cleaners with chemicals, solvents or harsh abrasives. Use only a dry soft

cloth to dust or wipe carefully.

LIMITED WARRANTY

The manufacturer warrants this lighting fixture to be free from defects in materials and workmanship for a

period of three (3) years from date of purchase. This warranty applies only to the original consumer

purchaser and only to products used in normal use and service. If this product is found to be defective, the

manufacturer’s only obligation, and your exclusive remedy, is the repair or replacement of of the product at

the manufacturer’s discretion, provided that the product has not been damaged through misuse, abuse,

accident, modifications, alterations, neglect or mishandling. This warranty shall not apply to any product

that is found to have been improperly installed, set-up, or used in any way not in accordance with the

instructions supplied with the product. This warranty shall not apply to a failure of the product as a result of

an accident, misuse, abuse, negligence, alteration, or faulty installation, or any other failure not relating to

faulty material or workmanship. This warranty shall not apply to the finish on any portion of the product,

such as surface and/or weathering, as this is considered normal wear and tear. The manufacturer does not

warrant and specially disclaims any warranty, whether expressed or implied, of fitness for a particular

purpose, other than the warranty contained herein. The manufacturer specifically disclaims any

liability and shall not be liable for any consequential or incidental loss or damage, including but not

limited to any labor/expense costs involved in the replacement or repair of said product.

Page 9

BALLAST REPLACEMENT:

This product is ENERGY STAR® listed. The ballast can be replaced without having to cut

wires. Please contact a qualified electrician if ballast replacement is needed.

Page 10

LUMINARIO DE TECHO CON LUZ FLUORESCENTE

HOME DEPOT SKU# 286-792 (UPC# 046335949768)

MANUAL DE INSTRUCCIONES

Page is loading ...

MODE D’INSTALLATION

PLAFONNIER À LUMIÈRE FLUORESCENTE

Page 19

HOME DEPOT UGS Nº 286-792 (CUP Nº 046335949768)

Page is loading ...

Hampton Bay HBF1129P-258 Operating instructions

Brand: Hampton Bay

Model: HBF1129P-258

Type: Operating instructions

Download PDF

report

in other languages

français: Hampton Bay HBF1129P-258 Mode d'emploi
español: Hampton Bay HBF1129P-258 Instrucciones de operación

Hampton Bay HBF1129P-258 Operating instructions

Hampton Bay HBF1129P-258 Operating instructions

in other languages

Related papers

Other documents