Hampton Bay HBF1332-273 Installation guide

Brand: Hampton Bay

Model: HBF1332-273

Type: Installation guide

Hampton Bay HBF1332-273 is a fluorescent ceiling flush mount fixture that can be installed in your home or office. It features easy installation that can be done by following the included instructions. The fixture can accommodate four 32W T8 fluorescent light bulbs, providing ample illumination for your space. It has a durable construction with a steel frame and acrylic diffuser that will provide long-lasting performance. The fixture is also energy-efficient, helping you save on energy costs.

INSTRUCTIONS MANUAL

FLUORESCENT CEILING FLUSH

MOUNT FIXTURE

Page 1

HOME DEPOT SKU# 536-196 (UPC# 046335935792)

Page 2

Thank you for purchasing this Hampton Bay Fluorescent Ceiling Flush

Mount Fixture. This product has been manufactured with the highest

standards of safety and quality.

FEATURES:

Before returning to your local Home Depot, please call our Customer

Service Team at 1-877-527-0313 or visit www.homedepot.com. Please

reference your SKU (536-196) or UPC (046335935792).

QUESTIONS, PROBLEMS, MISSING PARTS:

1. Easy to install.

Page 3

CAUTION:

1. Before starting installation of this fixture or removal of a previous

fixture, disconnect the power by turning off the circuit breaker or by

removing the fuse at the fuse box.

2. CONSULT A QUALIFIED ELECTRICIAN IF YOU HAVE ANY

ELECTRICAL QUESTIONS OR NEED TO REPLACE THE

BALLAST. If you have any non-electrical questions about this

fixture, please call our Customer Service Team at 1-877-527-0313 or

visit www.homedepot.com. Please reference your SKU (536-196) or

UPC (046335935792).

3. KEEP your receipt and these Instructions for Proof of Purchase.

TOOLS REQUIRED FOR INSTALLATION AND ASSEMBLY (not

included):

Safety

goggles

Wire

strippers

Phillips

screwdriver

Electrical

tape

Wire

cutters

Drill ¼” Drill

bit

Pencil

Hammer

PARTS INCLUDED FOR ASSEMBLY (parts are not to scale):

ASSEMBLY INSTRUCTIONS:

1. Carefully unpack the fixture. Lay out all parts on a clean surface.

2. Before continuing Assembly, please proceed to the Installation

Instructions.

3. Insert 32 W T8 Fluorescent Light Bulbs (#2) into the provided Lamp

Sockets (#3). (Fig. 1)

4. Secure the Frame (#20) to the Fixture Pan (#1) using the Thumb Nuts

(#19), as shown. (Fig. 2)

1 ea Fixture Pan (#1)

4 ea 32 W Fluorescent Light

Bulb(#2) (not included)

4 ea Thumb Nuts (#19)

1 ea Frame (#20)

Page 4

ASSEMBLY:

Page 5

4. 32 W Fluorescent

Light Bulb

1. Fixture Pan

Fig. 1

1. Fixture Pan

19. Thumb Nuts

Fig. 2

3. Lamp

Socket

20. Frame

Page 6

PARTS INCLUDED FOR INSTALLATION (parts are not to scale):

INSTALLATION INSTRUCTIONS:

3 ea Wire Nuts (#10) 2 ea Mounting Screws (#8)

1. Place the Fixture Pan (#1) onto the desired location, centering it over

the Outlet Box (#6). Mark the location of all the Keyhole Slots

(#16).

2. Remove the Fixture Pan (#1) from the Ceiling (#7). Drill

appropriately sized Holes (#17) at the marked keyhole locations.

Insert the Ceiling Anchors (#18) into the Holes (#17). Thread the

Mounting Screws (#8) halfway into the Ceiling Anchors (#18). (Fig.

3. Pull all the supply wires from the Outlet Box (#6) and feed them

through the center hole of the Cover Plate (#21). Secure the Cover

Plate (#21) to the Outlet Box (#6) using the Cover Plate Screws

(#22). (Fig. 4)

2 ea Ceiling Anchors (#18)

1 ea Cover Plate (#21)

2 ea Cover Plate

Screws (#22)

INSTALLATION INSTRUCTIONS (CONT.):

4. Attach the Black Supply Wire (#14) to the Black Fixture Wire (#15)

and the White Supply Wire (#9) to the White Fixture Wire (#11)

using Wire Nuts (#10). Connect the Fixture Ground Wire (#12) and

the Supply Ground Wire (#13) together using a Wire Nut (#10). (Fig.

4) Wrap all wire connections with electrical tape for a more secure

connection. Note: If you have electrical questions, consult your

local electric al code for approved grounding methods.

5. Carefully tuck all wire connections into the Outlet Box (#6). Place

the Fixture Pan (#1) onto the desired location, making sure that the

halfway threaded Mounting Screws (#8) feed through the large

openings of the Keyhole Slots (#16). Slide the Fixture Pan (#1) so

that the Mounting Screws (#8) slide into the narrow slots of the

Keyhole Slots (#16). Tighten the Mounting Screws (#8) down to

secure the Fixture Pan (#1) in place. (Fig. 5 & 5-1)

6. Proceed to Step 3 of the Assembly Instructions.

7. Installation is complete. Turn on power at the circuit breaker or fuse

box. Turn the light switch on to activate the fixture.

Page 7

Page 8

INSTALLATION:

Fig. 3

18. Ceiling

Anchor

1. Fixture Pan

7. Ceiling

17. Hole

6. Outlet Box

Fig. 4

11. White

Fixture Wire

10. Wire Nut

9. White Supply Wire

14. Black Supply Wire

13. Supply Ground Wire

15. Black Fixture Wire

6. Outlet Box

7. Ceiling

1. Fixture Pan

8. Mounting

Screw

12. Fixture Ground Wire

21. Cover Plate

22. Cover Plate

Screws

Page 9

INSTALLATION (CONT.):

6. Outlet Box

1. Fixture

Pan

7. Ceiling

Fig. 5

16. Keyhole

Slot

8. Mounting

Screw

16. Keyhole

Slot

Bottom View

Fig. 5-1

18. Ceiling

Anchor

8. Mounting

Screw

Possible Cause Corrective Action

1. Power is off. 1. Make sure power supply is on.

2. Faulty switch. 2. Test or replace switch.

3. Faulty wire connection. 3. Check wiring.

Fuse blows or circuit breaker

trips when light is turned on.

1. Crossed wires or power wire is grounding

out.

1. Check wire connections.

Light will not turn on.

TROUBLESHOOTING:

PRODUCT MAINTENANCE:

1. To clean the outside of the fixture, use a dry or slightly dampened clean cloth (use clean

water, never a solvent) to wipe the surface of the fixture.

2. To clean the inside of the fixture, first disconnect power to the fixture by turning off the

circuit breaker or by removing the fuse at the fuse box. Next, use a dry or slightly

dampened clean cloth (use clean water, never a solvent) to wipe the interior surface of the

fixture.

3. Do not use any cleaners with chemicals, solvents or harsh abrasives. Use only a dry soft

cloth to dust or wipe carefully.

LIMITED WARRANTY

The manufacturer warrants this lighting fixture to be free from defects in materials and workmanship for a

period of three (3) years from date of purchase. This warranty applies only to the original consumer

purchaser and only to products used in normal use and service. If this product is found to be defective, the

manufacturer’s only obligation, and your exclusive remedy, is the repair or replacement of of the product at

the manufacturer’s discretion, provided that the product has not been damaged through misuse, abuse,

accident, modifications, alterations, neglect or mishandling. This warranty shall not apply to any product

that is found to have been improperly installed, set-up, or used in any way not in accordance with the

instructions supplied with the product. This warranty shall not apply to a failure of the product as a result of

an accident, misuse, abuse, negligence, alteration, or faulty installation, or any other failure not relating to

faulty material or workmanship. This warranty shall not apply to the finish on any portion of the product,

such as surface and/or weathering, as this is considered normal wear and tear. The manufacturer does not

warrant and specially disclaims any warranty, whether expressed or implied, of fitness for a particular

purpose, other than the warranty contained herein. The manufacturer specifically disclaims any

liability and shall not be liable for any consequential or incidental loss or damage, including but not

limited to any labor/expense costs involved in the replacement or repair of said product.

Page 10

BALLAST REPLACEMENT:

This product is ENERGY STAR® listed. The ballast can be replaced without having to cut

wires. Please contact a qualified electrician if ballast replacement is needed.

HOME DEPOT SKU# 536-196 (UPC# 046335935792)

LUMINARIO DE TECHO CON LUZ

FLUORESCENTE

MANUAL DE INSTRUCCIONES

Page 11

Page is loading ...

MODE D’INSTALLATION

PLAFONNIER À LUMIÈRE

FLUORESCENTE

HOME DEPOT UGS Nº 536-196 (CUP Nº 046335935792)

Page 21

Page is loading ...

Hampton Bay HBF1332-273 Installation guide

Brand: Hampton Bay

Model: HBF1332-273

Type: Installation guide

Download PDF

report

in other languages

français: Hampton Bay HBF1332-273 Guide d'installation
español: Hampton Bay HBF1332-273 Guía de instalación

Hampton Bay HBF1332-273 Installation guide

Hampton Bay HBF1332-273 Installation guide

in other languages

Related papers

Other documents