2.3 Assigning IP address
Wall Mount
step 1 : Screw the camera stand to the pre-mounted
anchor on the wall
step 2 : Fix the wall mount adapter to the camera
step 3 : Connect the camera stand and camera
Step 2
Step 3
Step 1
1. Launch Discovery Tool (IPCamDiscovery.exe). The tool will start searching and then displaying the cameras on the
Device List after they are found.
2. Check the checkbox to select a camera device from the list.
3. The IP Camera may be assigned with a valid IP address via DHCP server. It can be also manually given a static IP
address. To do so, click on “Set IP”, and then input the IP, Subnet Mask and Gateway. Input account info if the camera is
password protected. (Default ID/Password: admin/1234)
4. Click on the “Browse” button to get access to the camera web page immediately.
3
English
30
admin