Avaya M4648ML-T Installation guide

  • Hello! I am an AI chatbot trained to assist you with the Avaya M4648ML-T Installation guide. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
Catalog No. DO0726 Rev.0 February 2003 1
Avaya™ M4648ML-T Installation Guide
The Avaya M4648ML-T is a 48 10/100BASE-T port multilayer I/O module for the
Avaya™ P460 switch.
Figure 1 M4648ML-T Front Panel
Safety Information
Caution: The Avaya P460 switch and modules contain components sensitive to
electrostatic discharge. Do not touch the circuit boards unless instructed to do so.
Caution: Do not leave any slots open. Use the the blanking plates supplied to cover
empty slots.
Caution: Do not insert any objects into the P460 chassis other than specifically
designed Avaya products.
Warning: Keep your fingers and other objects clear of the fan module. The fans are
on whenever the power is on in the chassis.
Avaya
2 Avaya™ M4648ML-T Installation Guide
Installing the Module in the Avaya P460
L You can install I/O modules in slots 3 to 6 only.
Figure 2 Installing P460 I/O Modules
1 Open the locking handles at the edge of the front panel.
2 Position the module in the slot with the module name towards the top left-hand
side of the module.
3 Gently slide the module in.
L Ensure the hooks on the locking handle are aligned with the matching holes on
the chassis.
4 Close the locking handles.
X The module slides back and connects to the backplane.
5 Gently tighten the screws.
Removing the Module from the Avaya P460
1 Loosen the screws.
2 Open the locking handles.
X The module is disconnected from the backplane and slides forward.
3 Grasp the handles and pull gently but firmly towards yourself.
4 Insert another module or a blanking plate.
3
3
P460
a
b
Key
a Open locking handle
b Closed locking handle
Avaya™ M4648ML-T Installation Guide 3
Specifications
Standards compliance
IEEE
IEEE 802.3x Flow Control
IEEE 802.1q/p VLAN Tagging and 802.1p compatible
IEEE 802.1D Spanning Tree protocol
IETF
MIB-II - RFC 1213
Bridge MIB for Spanning Tree - RFC 1493
RMON - RFC 1757
SMON - RFC 2613
Power requirement
48 W
Interface
48 10/100BASE-T ports (RJ-45)
Ordering information
Product Material Code PEC Code
Avaya M4648ML-T 700255029 4545-003
4 Avaya™ M4648ML-T Installation Guide
avaya.com
© 2003 Avaya Inc. All rights reserved. All trademarks identified by the ® or TM are registered trademarks
or trademarks, respectively, of Avaya Inc. All other trademarks are the property of their respective owners
/