Carrier 76-02105-00 User manual

76-02105-00
Carrier
Brand
Carrier
Model
76-02105-00
Type
User manual

Carrier 76-02105-00 is a snow/rain cover kit compatible with Supra S6, S7, S8, S9, and S10 models. It safeguards the unit from harsh weather conditions, such as snow and rain, ensuring uninterrupted performance and extending its lifespan. To install, remove the grille, hinge brackets, and hardware. Assemble the retaining clip, support rod, and clip to the condenser support bracket. Mount the top panel using flush head screws and secure it with screws and washers. For models with eSolutions, mount the antenna using the supplied hardware and grommet.

Carrier 76-02105-00 is a snow/rain cover kit compatible with Supra S6, S7, S8, S9, and S10 models. It safeguards the unit from harsh weather conditions, such as snow and rain, ensuring uninterrupted performance and extending its lifespan. To install, remove the grille, hinge brackets, and hardware. Assemble the retaining clip, support rod, and clip to the condenser support bracket. Mount the top panel using flush head screws and secure it with screws and washers. For models with eSolutions, mount the antenna using the supplied hardware and grommet.

THIS DOCUMENT AND THE INFORMATION CO NTAINED THEREIN IS
PROPRIETARY TO CARRIER CORPORATION A ND SHALL NOT BE USED
OR DISCLOSED TO OTHERS, IN WHOLE OR IN PART, WITHOUT THE
WRITTEN AUTHORIZATION OF CARRIER COR PORATION.
Carrier Corporation
Syracuse, New York 13221
P.O. Box 4805
Carrier Transicold Division
ACCEPTANCE OF CONTRACT
DOES NOT CONSTITUTE PART PERFORMANCE OR
SUBMISSION OF THESE DRAWINGS OR DOCU MENTS
SYM REVISION RECORD DATE BY ENGR. M.E. NPCA NO.
REVDRAWING NO.
TITLE
THIRD ANGLE
PROJECTION
SEE SEPARATE PARTS LIST
CTD PART NO. VERSION
98-03383-00 NATT SNOW/RAIN COVER
A
SHEET 1 OF 3
IMPERIAL INCH FORMAT:
UNLESS OTHERWISE SPECIFIED
DIMENSIONS ARE IN INCHES WITH
METRIC CONVERSIONS IN [MILLIMETERS]
98-03383
INSTALL INSTRUCTION. SNOW/RAIN COVER
- INITIAL RELEASE. 12 JUL 2019 LT-SN MGC 71N0211P19
AMOVED INSTALLATION STEPS TO APPROPRIATE VIEWS; ADDED SHT.3,
CONTENTS CHART, AND WARNING INFORMATION; SEE SHT's 2 & 3 31 AUG 2020 MGC ECN1135359
SUPERSEDES: PART CLASSIFICATION: US EAR99
DRAWING CLASSIFICATION: US
EAR99
PART NO. MODEL DESCRIPTION KIT NUMBER
(REFERENCE)
98-03383-00 NATT SNOW/RAIN COVER
SUPRA S6, S7, S8, S9 & S10 76-02105-00
INSTRUCTIONS CONTENTS SHEET
GENERAL INFORMATION & GRILLE REMOVAL 1
TOP PANEL SUPPORT ROD INSTALLATION 2
TOP PANEL INSTALLATION 3
SHEET
INDEX
REV A A A
SHEET 1 2 3
INITIAL MODELS: SUPRA S6, S7, S8, S9 & S10
INSTALLATION PROCEDURE STEPS:
1.0 TO REMOVE THE GRILLE, FIND & REMOVE 3 QTY. OF STAUFF CLAMP, WASHER & SCREW
AT THE UPPER REAR SECTION OF THE UNIT. FIND & REMOVE 3 QTY. OF P-CLAMP
& SCREW WITH CAPTIVE WASHER AT THE UPPER FRONT SECTION OF THE UNIT.
2.0 REMOVE THE HINGE BRACKET AND ITS HARDWARE AT SHOWN LOCATION.
3.0 ASSEMBLE THE ITEM #10 (RETAINING CLIP), #20 (LINKAGE ROD) & #30 (CLIP)
IN THE CONDENSER SUPPORT BRACKET AS SHOWN.
4.0 ASSEMBLE THE ITEM #40 (TOP PANEL ASSY) USING THE HARDWARE SUPPLIED WITH IT AS SHOWN.
STEP 1
REMOVE THE GRILLE. FIND & REMOVE 3 QTY. OF STAUFF CLAMP, WASHER & SCREW
AT THE UPPER REAR SECTION OF THE UNIT. FIND & REMOVE 3 QTY. OF P-CLAMP &
SCREW WITH CAPTIVE WASHER AT THE UPPER FRONT SECTION OF THE UNIT.
REMOVE THE HINGE BRACKETS AND
HARDWARE AT LOCATIONS SHOWN.
1.0 SAFETY:
1.1 TOOLS: MAKE CERTAIN ALL TOOLS AND EQUIPMENT ARE APPROPRIATE FOR THE JOB BEING COMPLETED, AND
ARE IN PROPER WORKING CONDITION.
1.2 PERSONAL PROTECTIVE EQUIPMENT (PPE): ALWAYS UTILIZE APPROPRIATE PERSONAL PROTECTIVE EQUIPEMENT
THAT IS IN PROPER WORKING CONDITION. PERSONAL PROTECTIVE EQUIPMENT EXAMPLES INCLUDE, BUT
IS NOT LIMITED TO THE ITEMS SHOWN BELOW.
2.3 RISKS: BE AWARE OF YOUR ENVIRONMENT AND SURROUNDINGS. FOLLOW ALL LOCK OUT / TAG OUT PROCEDURE
ON ALL EQUIPMENT INVOLVED IN THIS PROCEDURE INCLUDING THE UNIT ITSELF AND ALL EXTERNAL
POWER AND/OR FUEL SOURCES.
WARNING
READ ALL INSTRUCTIONS PRIOR TO INSTALLATION
STEP 1
STEP 2
STAUFF CLAMP, WASHER & SCREW
P-CLAMP & SCREW
WITH CAPTIVE WASHER
GRILLE
HINGE BRACKETS AND
HARDWARE
THIS DOCUMENT AND THE INFORMATION CO NTAINED THEREIN IS
PROPRIETARY TO CARRIER CORPORATION A ND SHALL NOT BE USED
OR DISCLOSED TO OTHERS, IN WHOLE OR IN PART, WITHOUT THE
WRITTEN AUTHORIZATION OF CARRIER COR PORATION.
ACCEPTANCE OF CONTRACT
DOES NOT CONSTITUTE PART PERFORMANCE OR
SUBMISSION OF THESE DRAWINGS OR DOCU MENTS
SYM REVISION RECORD DATE BY ENGR. M.E. NPCA NO.
REVDRAWING NO.
TITLE
Carrier Corporation
Syracuse, New York 13221
P.O. Box 4805
Carrier Transicold Division
THIRD ANGLE
PROJECTION
10
20
30
A
SHEET 2 OF
IMPERIAL INCH FORMAT:
UNLESS OTHERWISE SPECIFIED
DIMENSIONS ARE IN INCHES WITH
METRIC CONVERSIONS IN [MILLIMETERS]
98-03383
INSTALL INSTRUCTION. SNOW/RAIN COVER
- INITIAL RELEASE. 12 JUL 2019 LT-SN MGC 71N0211P19
AADDED INSTALLATION PROCEDURE INFORMATION TO STEP 3 WAS SHOWN
ON SHT.1; PIC'T ADDED S10; MOVED STEP 4 INFO. TO SHT.3(NEW SHT.) 13 AUG 2020 MGC ECN1135359
SUPERSEDES: PART CLASSIFICATION: US EAR99
DRAWING CLASSIFICATION: US
EAR99
S10
S6, S7, S8 & S9
ASSEMBLE ITEM #10 (RETAINING CLIP), #20 (SUPPORT ROD) &
#30 (CLIP) TO THE CONDENSER SUPPORT BRACKET AS SHOWN.
STEP 3
SEE
DETAIL A
SEE
DETAIL A
DETAIL A
SCALE 0.400
THIS DOCUMENT AND THE INFORMATION CO NTAINED THEREIN IS
PROPRIETARY TO CARRIER CORPORATION A ND SHALL NOT BE USED
OR DISCLOSED TO OTHERS, IN WHOLE OR IN PART, WITHOUT THE
WRITTEN AUTHORIZATION OF CARRIER COR PORATION.
ACCEPTANCE OF CONTRACT
DOES NOT CONSTITUTE PART PERFORMANCE OR
SUBMISSION OF THESE DRAWINGS OR DOCU MENTS
SYM REVISION RECORD DATE BY ENGR. M.E. NPCA NO.
REVDRAWING NO.
TITLE
Carrier Corporation
Syracuse, New York 13221
P.O. Box 4805
Carrier Transicold Division
THIRD ANGLE
PROJECTION
ASSEMBLE ITEM #40 (TOP PANEL ASSY) AS SHOWN USING THE HARDWARE SUPPLIED.
SECURE TOP PANEL USING
SCREW & WASHER QTY. 3
AT THE UPPER FRONT
SECTION OF THE UNIT
TORQUE 6 # 1 FT-LBS
[8.1 #1.4 Nm]
ASSEMBLE ITEM 40 (TOP PANEL)
TO THE UPPER REAR SECTION
OF THE UNIT BY USING
FLUSH HEAD SCREWS
SUPPLIED (QTY. 6)
TORQUE 6 # 1 FT-LBS
[8.1 #1.4 Nm]
40
A
SHEET 3 OF
IMPERIAL INCH FORMAT:
UNLESS OTHERWISE SPECIFIED
DIMENSIONS ARE IN INCHES WITH
METRIC CONVERSIONS IN [MILLIMETERS]
98-03383
INSTALL INSTRUCTION. SNOW/RAIN COVER
A
ADDED THIS SHT.; VIEWS WERE SHOWN ON SHT.2; ADDED INSTALLATION
PROCEDURE INFORMATION TO STEP 4 WAS SHOWN ON SHT.1; ADDED VIEW
"eSOL ANTENNA MNTG"; REPLACED IT.40
13 AUG 2020 MGC ECN1135359
SUPERSEDES: PART CLASSIFICATION: US EAR99
DRAWING CLASSIFICATION: US
EAR99
STEP 4
eSOLUTIONS ANTENNA MNTG
SCALE 0.250
FOR MODELS EQUIPED WITH eSOLUTIONS,
MOUNT THE ANTENNA AS SHOWN USING HARDWARE AND
GROMMET SUPPLIED WITH eSOLUTIONS KIT.
TORQUE HARDWARE TO 18 #1.0 IN-LBS.
[2.0 # 0.1 Nm]
  • Page 1 1
  • Page 2 2
  • Page 3 3

Carrier 76-02105-00 User manual

76-02105-00
Carrier
Brand
Carrier
Model
76-02105-00
Type
User manual

Carrier 76-02105-00 is a snow/rain cover kit compatible with Supra S6, S7, S8, S9, and S10 models. It safeguards the unit from harsh weather conditions, such as snow and rain, ensuring uninterrupted performance and extending its lifespan. To install, remove the grille, hinge brackets, and hardware. Assemble the retaining clip, support rod, and clip to the condenser support bracket. Mount the top panel using flush head screws and secure it with screws and washers. For models with eSolutions, mount the antenna using the supplied hardware and grommet.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents