superbrightleds com LFB-D Series User manual

LED Ready Deck Lights

User Manual

Important: Read all instructions prior to installation. LFB-D series

4400 Earth City Expy, St. Louis, MO 63045 866-590-3533 superbrightleds.com

Rev Date: V1 04/05/2022

Safety and Notes

• This product should be installed and serviced in accordance with

applicable national, state, and local building and electrical codes.

• For use with OUTDOOR, low-voltage landscape lighting systems

ONLY.

• NOT FOR USE with submersible or pool/spa equipment.

• Do not submerge in water, the product can be damaged.

• For low voltage use only. Power supply voltage must match

installed bulb.

• These lights are designed for G4 bulbs (up to 20 W), which

are not included.

1. Remove front light cover.

2. Mark and drill holes in mounting surface.

3. With supply power o, make electrical connection.

4. Mount light housing, using additional weatherproof sealant on

rear as needed.

5. Install compatible bulb.

6. Reinstall front light cover.

Dimensional Drawings

LFB-D02