2. superbrightleds com
  3. LFB-H Series
LFB-H Series

superbrightleds com LFB-H Series User manual

  • Hello! I've reviewed the user manual for the LFB-H series LED Ready Hardscape Light, specifically model LFB-H08. This document outlines important safety precautions, installation steps, and provides a list of recommended accessories. I understand that it is designed for outdoor, low-voltage landscape lighting systems and requires G4 bulbs. I'm ready to assist you with any questions you may have about this lighting product.
  • What type of bulbs are compatible with these lights?
    Can these lights be used underwater?
    What voltage should the power supply be?
LED Ready Hardscape Light
Important: Read all instructions prior to installation. LFB-H Series
4400 Earth City Expy, St. Louis, MO 63045 866-590-3533 superbrightleds.com
Rev Date: V1 04/06/2022
User Manual
Recommended Accessories
Installation Instructions
Safety and Notes
• For use with OUTDOOR, low-voltage landscape lighting systems ONLY.
• NOT FOR USE with submersible or pool/spa equipment.
• Do not submerge in water, the product can be damaged.
• For low voltage use only. Power supply voltage must match installed bulb.
• These lights are designed for G4 bulbs (up to 20 W), which are not
included.
LFB-H08
1. Remove lens.
2. Install compatible bulb and reinstall lens.
3. Lay out xtures as they will be installed.
4. Run landscape wire (WP14-2DB or WP12-2DB) from power supply past
each light. Wire must be within a few inches of mounting location to allow
power connections to be made.
5. Install light, concealing and protecting wiring.
Part Number Description
WWN-2212 silicone lled wire nut
SFT-20 self fusing silicone tape
WP14-2DB 14 gauge landscape wire
WP12-2DB 12 gauge landscape wire
/