C50.V2010.02E-1
Brake for
wheels
Metal casters
Power fix
bracket
Slot bracket
3-speed fan
controller
Side panel
lock
14cm fan
module
Loosen the screws to remove
dust-free cover for water tube
openings.
Support liquid cooling
system
Side panels installation
Removable fan filter
1
2
Push to release
Loose the screw and pull the
latch to release the side panel.
Remove the side panel.
Loosing the two thumb screws on the fan module to release.
Removable
air filter
1. Fasten the HDD screws with
anti-vibration rubber rings to the
HDD.
2. Slide the HDD into the HDD cage
with the anti-vibration kit.
3. Press down the HDD into the
slots to secure.
Adding extra screw to
the HDD cage for extra
security.
Note:
Removable air filter
1
Chip set cooler installation Rubber protectors for aluminum
wheels.
2
Adding a lock to secure the
hardware.
Hardware list
Extension cable 12V(1)
for power supply to M/B
Power supply
holder kit(2)
PCI card holder-S(3)
PCI card holder-L(4)
Thumb screw(7)
for PCI card holder
Chip set cooler(1)+
themb screw(2)
to mount on
PCI card holder
(8)
(70
Thumb screw(8)
1
for stand off
2
Rubber protectors(4)
for wheels
Buzzer(1)
Stand off bolt(16)
for SSI CEB/EEB
for stand off bolt
for HDD extra fixing
for cable management
Thumb screw(34)
& rubber ring(34)
for fix HDD
For user who wants to use
single power supply unit,
and using the space next to
it for other purpose.
Box(1)
for spare parts
Mounting plate for dual PSUs,
Recommended to use the power supply with 80mm exhaust fan.
Loosing two thumb screws to release the M/B tray.
Secure the stand off bolts on the M/B tray which
match with the M/B fix points, place the M/B on
the copper bolt, fasten the screws to secure.
The oval hole on M/B tray
designed for special
server boards, please use
the nut to hold the copper
bolt in place.
3
Release brake
C50.V2010.02E-2
2
3-speed fan
adjustable device
L M H
3 2 1
1
for SSI CEB/EEB
VGA Card Pillar Installation Guide
1
2
3
4
PSU tray installation
Extension cable for 12V PSU to M/B
For user who wants to use
single power supply unit,
and using the space next to
it for other purpose.
Loosing two screws on the case bottom to release
long power supply support bracket.
Fasten the screws on the case bottom to
secure the power bracket.
Mounting plate for dual PSUs,
Recommended to use the power
supply with 80mm exhaust fan.
6
6
4
2
10
8
4
2
8
10
6
2
4
10
8
USB
5
5
3
1
9
7
1394
3
1
7
9
5
1
3
9
7
USB
4
2
10
6
8
3
1
9
5
7
HD AUDIO
AC'97
10
9
8
6
7
5
2
4
1
3
MIC
EAR
Blue(PORT2 L)
Black(SENSE SEND)
Yellow(PORT2 R)
Brown(PORT1 R)
Red(PORT1 L)
Green(SENSE2 RETUR)
KEY
Orange(SENSE1 RETUR)
Black(PRESENCE)
Black(GND)
Black(AGND)
NC
Yellow(R-RET)
KEY
Blue(L-RET)
Red(MIC)
Brown(MIC-PWE)
Yellow(R-OUT)
Blue(L-OUT)
KEY
Black(GND)
Green
White
Red
Black(GND)
Green
White
Red
KEY
Black(GND)
Green
White
Red
Black(GND)
Green
White
Red
Black(KEY)
White(+12V)
Green(TPB+)
Black(VG)
Blue(TPA+)
SATA Cable
USB
USB
IEEE1394
E-SATA
Connector
Black(GND)
White(+12V)
Red(TPB-)
Black(VG)
Orange(TPA-)
C50.V2010.02E-3
/
