LNC A0224101 Operating instructions

LNC
Brand
LNC
Model
A0224101
Type
Operating instructions

LNC A0224101 is a single-socket light fixture designed for indoor use. It is made of metal and has a shade made of fabric or glass. The fixture can be mounted on a wall or ceiling and requires a 120V power source. The maximum wattage for the bulb is 60W.

The fixture comes with all the necessary hardware for installation, including mounting screws, wire connectors, and a ground screw. The assembly and installation process is relatively simple and can be completed in a few steps.

Once installed, the LNC A0224101 can be used to provide ambient lighting in a variety of settings, such as bedrooms, living rooms, and hallways. It can also be used as a task light in areas such as kitchens and offices.

LNC A0224101 is a single-socket light fixture designed for indoor use. It is made of metal and has a shade made of fabric or glass. The fixture can be mounted on a wall or ceiling and requires a 120V power source. The maximum wattage for the bulb is 60W.

The fixture comes with all the necessary hardware for installation, including mounting screws, wire connectors, and a ground screw. The assembly and installation process is relatively simple and can be completed in a few steps.

Once installed, the LNC A0224101 can be used to provide ambient lighting in a variety of settings, such as bedrooms, living rooms, and hallways. It can also be used as a task light in areas such as kitchens and offices.

 Weareheretohelp:[email protected]
www.lnchome.comPage:  ‐1‐/4
ItemNumber:A0224101
WARNING(Toreducetheriskoffire,electricshock,orinjurytopersons):
1. Wesuggestinstallationbyalicensedelectrician.
2. Pleasereadtheinstructioncarefullyandsaveitasyoumayneeditatlatertime.
3. Beforeyoustart,NEVERattemptanyworkwithoutshuttingofftheelectricityuntilthe workisdone. A).Go tothe
mainfuse,orcircuitbreaker,boxinyourhome.Placethemainpowerswitchinthe“OFF”position.B).Placethewall
switchinthe“OFF”position.
4. Mounting surface should be clean, dry, flat, strong enough and 1/4”largerthanthecanopyonallside.Anygaps
betweenthemountingsurfaceandcanopyexceeding3/16”shouldbecorrectedasrequired.
5. Makesurethattheceilingorwallcanstandtheweightofthelampbeforefixture.
6. Makesurethevoltageyouareusingis120V.Themaximumwattageis60Wperbulb.
7. Keepthelampawayfromacidicandbasicobjectsincaseofdamagingthesurfaceofthelamp.
8. Whenreplacingbulb,youshouldturnofforunplugthelampandyoumustwaituntilitiscoolasbulbsgethotquickly.
9. Thesafetyinstructionsappearinginthismanualarenotmeanttocoverallpossibleconditionsthatmayoccur.Itmust
beunderstoodthatcommonsense,cautionandcaremustbeusedwithanyelectricalproducts.
IMAGEFORFINISHEDPRODUCT：
 Weareheretohelp:[email protected]
www.lnchome.comPage:  ‐2‐/4
TOOLSREQUIRED(NOTINCLUDED):
Beforedoingassemblyandinstallationpleasepreparetheneededtoolsasbelowpicture
PARTSINCLUDING:
(A) Mounting plate A (1)
(C) Green ground screw C (1)
(E) Canopy E (1)
(F) Threaded ball F (2)
(G) Socket cap G (1)
(H) Shade H (1)
( I ) Ring I
ACCESSORIESENCLOSED: 
(B) Mounting screw B (2)
(D) Plastic Wire Connectors D (3)
ASSEMBLY&INSTALLATIONINSTRUCTIONS:
1. Openthepackageandtakeoutallthepartsoraccessories,
 thenplacethemonacleanflatplace.
2.  Turnoffpower 
3.UnscrewRingIfromsocket(REFERTOCHARTA1)
 Weareheretohelp:[email protected]
www.lnchome.comPage:  ‐3‐/4
4.TightenshadeHtosocketcapGbyscrewingtheringI(REFERTOCHARTA2)
5.UnscrewthreadedballFandtakeoutmountingplate 
  AfromcanopyE.(REFERTOCHARTA2)

6.AttachmountingplateAtooutletboxbymountingscrewB(REFERTOCHARTA3)
7.Connectwireasbelow(REFERTOCHARTA4)

 Weareheretohelp:[email protected]
www.lnchome.comPage:  ‐4‐/4
IMPORTANTNOTE:
ConnectgroundwireaccordingtobelowchartConnectwiresaccordingtobelowchart
8.PushcanopyEtowall,carefullypassingmountingscrewsthroughholesincanopyE.andthentightenitwiththreaded
ballF  (REFERTOCHARTA5)
9.Installbulb(notincluded)(REFERTOCHARTA6)
10. Checkeverythinginstalledcorrect,thenyoucouldturnonthelight. 
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4

LNC A0224101 Operating instructions

LNC
Brand
LNC
Model
A0224101
Type
Operating instructions

LNC A0224101 is a single-socket light fixture designed for indoor use. It is made of metal and has a shade made of fabric or glass. The fixture can be mounted on a wall or ceiling and requires a 120V power source. The maximum wattage for the bulb is 60W.

The fixture comes with all the necessary hardware for installation, including mounting screws, wire connectors, and a ground screw. The assembly and installation process is relatively simple and can be completed in a few steps.

Once installed, the LNC A0224101 can be used to provide ambient lighting in a variety of settings, such as bedrooms, living rooms, and hallways. It can also be used as a task light in areas such as kitchens and offices.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents