LNC A03330 Operating instructions

Type
Operating instructions
Weareheretohelp:[email protected]
www.lnchome.comPage: ‐1‐/3
ItemNumber:A03330
WARNING(Toreducetheriskoffire,electricshock,orinjurytopersons):
1. Wesuggestinstallationbyalicensedelectrician.
2. Pleasereadtheinstructioncarefullyandsaveitasyoumayneeditatlatertime.
3. Beforeyoustart,NEVERattemptanyworkwithoutshuttingofftheelectricityuntiltheworkisdone.A).Gotothemain
fuse,orcircuitbreaker,boxinyourhome.Placethemainpowerswitchinthe“OFF”position.B).Placethewallswitch
inthe“OFF”position.
4. Mountingsurfaceshouldbeclean,dry,flat,strongenoughand1/4largerthanthecanopyonallside.Anygapsbetween
themountingsurfaceandcanopyexceeding3/16”shouldbecorrectedasrequired.
5. Makesurethattheceilingorwallcanstandtheweightofthelampbeforefixture.
6. Makesurethevoltageyouareusingis120V.Themaximumwattageis60Wperbulb.
7. Keepthelampawayfromacidicandbasicobjectsincaseofdamagingthesurfaceofthelamp.
8. Whenreplacingbulb,youshouldturnofforunplugthelampandyoumustwaituntilitiscoolasbulbsgethotquickly.
9. Thesafetyinstructionsappearinginthismanualarenotmeanttocoverallpossibleconditionsthatmayoccur.Itmust
beunderstoodthatcommonsense,cautionandcaremustbeusedwithanyelectricalproducts.
IMAGEFORFINISHEDPRODUCT
Weareheretohelp:[email protected]
www.lnchome.comPage: ‐2‐/3
TOOLSREQUIRED(NOTINCLUDED):
Beforedoingassemblyandinstallationpleasepreparetheneededtoolsasbelowpicture
PARTSINCLUDING:
(A) Anchor (2)
(B)Mounting plate (1)
(C)Green ground screw (1)
(F) Tapping screw (2)
(G) Back plate (1)
(H) Knob nut (2)
( I ) Ceramic socket (3)
(J) Glass shade (3)
(K) Socket ring (3)
(L) Spacer tool (1)
ACCESSORIESENCLOSED:
(E) Mounting screw (2)
(D)Plastic wire connector (3)
ASSEMBLY&INSTALLATIONINSTRUCTIONS:
1. Carefullyremovethefixturefromthecartonandcheckthatallpartsand
accessoriesareincludedasshownintheaboveillustration
2. Turnoffpower
3.Makeassembly
Weareheretohelp:[email protected]
www.lnchome.comPage: ‐3‐/3
StepA1:Unscrewtheknobnut(F)frombackplate(G)thengentlyremovemountingplate(B)
StepA2:
Secure back plate (B) to outlet box with outlet box screws (E), plastic wall anchors (A) and wood screws (F).
StepA3:Makewireconnections
Connectwiresasbelowwiresconnectingshown.TAKENOTEOFYOURWIRECOLOROFFIXTURE,NEVERCONNECT
WIRETOGROUNDWIRE
ConnectgroundwireaccordingtobelowchartConnectwiresaccordingtobelowchart
Twistplasticwireconnectoruntilwiresaretightlyjoinedtogether,wrapeachconnectorwithapprovedelectricaltapeand
carefullytuckallwiresintotheoutletbox
StepA4:Putthebackplate(G)onthescrewsandsecurethemwithballnut(F)
StepA5:
Remove socket ring (K) from socket with spacer tool (L). Then position glass shade (J) on
socket (I). And secure with socket ring (K).
Installbulb(Notincluded.Pleasedonotexceedthemaximumcapacityrecommendedonthesocket.)
4.
Checkeverythinginstalledproper,thenyoucouldturnonthelight.
CLEANING
To clean, wipe fixture with a soft cloth. Clean glass with a mild soap. Do not use abrasive materials such as
scouring pads or powders, steel wool or abrasive paper.
ORDERINGPARTS
Keep this sheet for future reference, and in case you need to order replacement parts. All parts for this fixture
can be ordered from place of purchase. Be sure to use exact wording from illustration when ordering parts.
  • Page 1 1
  • Page 2 2
  • Page 3 3

LNC A03330 Operating instructions

Type
Operating instructions

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI