Marco FRIIA C Installation guide

FRIIA C
Marco
Brand
Marco
Model
FRIIA C
Type
Installation guide

This manual is also suitable for

Marco FRIIA C (Tall) is a versatile font system that can dispense various beverages, including cold, carbonated, hot, and concentrated coffee, as well as hot and cold ready-to-drink options. It features easy operation with push-and-hold or push-and-release buttons for precise dispensing. The font includes accessories like a cold button, carbonated button, font cold coffee button, hot coffee button, concentrate coffee button, and more. Installation requires counter cut-outs of either 32mm/1 ¼” or 100mm/4”, depending on whether a drip tray is used.

Marco FRIIA C (Tall) is a versatile font system that can dispense various beverages, including cold, carbonated, hot, and concentrated coffee, as well as hot and cold ready-to-drink options. It features easy operation with push-and-hold or push-and-release buttons for precise dispensing. The font includes accessories like a cold button, carbonated button, font cold coffee button, hot coffee button, concentrate coffee button, and more. Installation requires counter cut-outs of either 32mm/1 ¼” or 100mm/4”, depending on whether a drip tray is used.

1
Instruction Manual
Machine P/N: 1000858, 1000859
UNA FONT
2
100mm
/ 4”
32mm
/ 1 ¼”
82.5mm
Scale 1:1
For drip tray only
100mm
NOTE: Check scale of template before cutting. Scale should be 1:1
Contents
1. Font Box Contents................................................................................................2
2. Counter Cut-Out.................................................................................................2
3. Installation..........................................................................................................4
No Drip Tray...............................................................................................4
Drip Tray...................................................................................................5
Connecting Hoses......................................................................................6
4. Operating Font...................................................................................................7
5. Cleaning & Maintenance......................................................................................7
Font Box Contents
Part Number Description Qty Application
1000858/9 1B Una Font/Tall 1
1900033 Instruction Manual UNA font 1
1860384 FRIIA Cold Button 1
1860385 FRIIA Carbonated Button 1
1860398 Font Cold Coffee Button 1
1860399 Hot Coffee Button 1
1860397 Concentrate Coffee Button 1
1800630 Hose Silicone 8mm I.D. X 12mm O.D 2 Vent & SP9 hot hose
2301251 Tube FEP 5/32” ID x 1/4” OD x
500mm
1 Cold/sparkling hose
2301250 Tube FEP 6mm ID x 8mm OD x
500mm
1 MIX hot hose
1400820 8mm - 1/4” Parker Legris Reducer
Connector
1 Adaptor for cold/sparkling
hose
1401482 Plug Legris 6mm with tailpiece 1 Vent plug for cold/sparkling
1400773 Barbed Connector 5/16” - 3/8” 1 Adaptor for SP9
Counter Cut Out
• The 100mm /4” cut out is only required for the font with drip tray.
• The font without drip tray require the 32mm / 1 ¼” cut out only.
• Use a 32mm/ 1 ¼” & a 100mm /4” circular hole saw piece to make the holes.
3
100mm
/ 4”
32mm
/ 1 ¼”
82.5mm
Scale 1:1
For drip tray only
100mm
NOTE: Check scale of template before cutting. Scale should be 1:1
Counter Cut Out
4
Installation
32mm / 1 ¼”
1. No Drip Tray
130 - 500mm
130 - 500mm
50mm
Hosing should be trimmed to ensure
continuous drop from font to boiler
5
Installation
The drain outlet on the drip
tray should be plumbed to
waste.
32mm/ 1 ¼”
100mm/ 4”
2. Drip Tray (sold seperately p/n. 2300268)
130 - 500mm
130 - 500mm
50mm
Hosing should be trimmed to ensure
continuous drop from font to boiler
6
Hot Water
Power
Vent2301250
Connecting Hoses
Vent
Hot Water
SP9 Boiler
1400773
1800630
1800630
Hot Cold / Sparkling
SP9 Boiler Connection
Power
1401482
1400820
Cold/Sparkling
Water
2301251
7
Power
1401482
1400820
Cold/Sparkling
Water
2301251
Hot / Cold Ready to drink
If using urn use
hard tubing
Power
font to control box
Concentrate shot
hot or cold source
to coffee source
Power
font to control box
Concentrate source
(soft tubing for BIB
Hard tubing for urn)
UNA FONT - Connecting Hoses
1400824
1400820
1400773
8
Operating Font
Cleaning & Maintenance
RISK OF SCALDING
Turn off the boiler before cleaning to
prevent accidental triggering of a
dispense.
Beware of accidentally operating the font –
especially when cleaning around the push
buttons.
The exterior of this font may be cleaned
with a damp cloth and a light detergent.
Twist off and wash out flow straightener.
Do not use abrasive cloths or creams, as
this will spoil the finish of the font.
1. Push & Hold 2. Push & Release
85°
100
9
Marco Beverage Systems Limited.
63d Heather Road,
Sandyford Industrial Estate,
Dublin 18
t: +353 (0)1 295 2674
f: +353 (0)1 295 3715
e: sales@marco.ie
www.marcobeveragesystems.com
NSF/ANSI 4
E337347
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9

Marco FRIIA C Installation guide

FRIIA C
Marco
Brand
Marco
Model
FRIIA C
Type
Installation guide
This manual is also suitable for

Marco FRIIA C (Tall) is a versatile font system that can dispense various beverages, including cold, carbonated, hot, and concentrated coffee, as well as hot and cold ready-to-drink options. It features easy operation with push-and-hold or push-and-release buttons for precise dispensing. The font includes accessories like a cold button, carbonated button, font cold coffee button, hot coffee button, concentrate coffee button, and more. Installation requires counter cut-outs of either 32mm/1 ¼” or 100mm/4”, depending on whether a drip tray is used.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents