Marco MIX font – 3 Button Installation guide

Marco
Brand
Marco
Model
MIX font – 3 Button
Type
Installation guide

This manual is also suitable for

Marco MIX font – 3 Button: a versatile beverage dispenser for your commercial needs. With its three buttons, you can dispense hot water, cold water, and mixed drinks effortlessly. Installation is simple, with options for both drip tray and no-drip tray configurations. Cleaning and maintenance are a breeze, thanks to the font's durable construction and easy-to-clean exterior.

Marco MIX font – 3 Button: a versatile beverage dispenser for your commercial needs. With its three buttons, you can dispense hot water, cold water, and mixed drinks effortlessly. Installation is simple, with options for both drip tray and no-drip tray configurations. Cleaning and maintenance are a breeze, thanks to the font's durable construction and easy-to-clean exterior.

1
Instruction Manual
Machine P/N: 1000878# , 1000879# & 1000879FB
2
100mm
/ 4”
32mm
/ 1 ¼”
82.5mm
Scale 1:1
For drip tray only
100mm
NOTE: Check scale of template before cutting. Scale should be 1:1
Contents
1. Font Box Contents................................................................................................2
2. Counter Cut-Out.................................................................................................2
3. Installation..........................................................................................................4
No Drip Tray...............................................................................................4
Drip Tray...................................................................................................5
Connecting Hoses......................................................................................6
4. Operating Font...................................................................................................7
5. Cleaning & Maintenance......................................................................................7
Font Box Contents
3 & 4 Button Models
• MIX Font
• Vent Hosing
• Hot Water Hose
• Cold Water Hose
• Instruction Manual
•Button Identifier Tag
•Button Identifier Clip
Counter Cut Out
• The 105mm /4 ⅛” cut out is only required for the font with drip tray.
• The font without drip tray require the 32mm / 1 ¼” cut out only.
• Use a 32mm/ 1 ¼” & a 105mm /4 ⅛” circular hole saw piece to make the holes.
Single Button Model
• MIX Font
• Vent Hosing
• Hot Water Hose
• Instruction Manual
• SP9 Adaptor Kit
3
100mm
/ 4”
32mm
/ 1 ¼”
82.5mm
Scale 1:1
For drip tray only
100mm
NOTE: Check scale of template before cutting. Scale should be 1:1
Counter Cut Out
4
Installation
32mm / 1 ¼”
1. No Drip Tray
130 - 500mm
130 - 500mm
50mm
Hosing should be trimmed to ensure
continuous drop from font to boiler
5
Installation
The drain outlet on the drip
tray should be plumbed to
waste.
32mm/ 1 ¼”
100mm/ 4”
2. Drip Tray (sold seperately p/n. 2300268)
130 - 500mm
130 - 500mm
50mm
Hosing should be trimmed to ensure
continuous drop from font to boiler
6
Hot Water
Vent
Power
Cold Water
Hot Water
Vent
Power
Connecting Hoses
Vent
Hot Water
SP9 Boiler
3 & 4 Button Font Connections Single Button Font Connections
SP9 Boiler Connection
7
Operating Font
Cleaning & Maintenance
RISK OF SCALDING
Turn off the boiler before cleaning to
prevent accidental triggering of a
dispense.
Beware of accidentally operating the font –
especially when cleaning around the push
buttons.
The exterior of this font may be cleaned
with a damp cloth and a light detergent.
Do not use abrasive cloths or creams, as
this will spoil the finish of the font.
1. Push & Hold
2. Push & Release
Quantity
85°
100
Marco Beverage Systems Limited.
63d Heather Road,
Sandyford Industrial Estate,
Dublin 18
t: +353 (0)1 295 2674
f: +353 (0)1 295 3715
e: sales@marco.ie
www.marcobeveragesystems.com
NSF/ANSI 4
E337347
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8

Marco MIX font – 3 Button Installation guide

Marco
Brand
Marco
Model
MIX font – 3 Button
Type
Installation guide
This manual is also suitable for

Marco MIX font – 3 Button: a versatile beverage dispenser for your commercial needs. With its three buttons, you can dispense hot water, cold water, and mixed drinks effortlessly. Installation is simple, with options for both drip tray and no-drip tray configurations. Cleaning and maintenance are a breeze, thanks to the font's durable construction and easy-to-clean exterior.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents