Dakota Digital VLK-51F Mounting Manual

Manual # 650407A

VLC/VLK-51F

Dakota Digital Clock Installation

For ‘51 Ford Car

Your new VLC/VLK-51F kit includes:

Installation

CAT5 Cable

(BOTH VLK &VLC)

VLK Clock

Installation Manuals

1. Remove the original clock by removing

the two nuts that secure it to the dash.

Save the nuts for reassembly

VLC Clock

12V Power Harness

(VLC ONLY)

3-Pin Switch Harness

(VLK ONLY)

Manual # 650407A

WARNING: This product can expose you to chemicals including lead, which is known to the State of

California to cause cancer and birth defects or other reproductive harm. For more information go to

www.P65Warnings.ca.gov

3. Connect the CAT5 cable and the 3-pin

switch harness or 12V power harness

to the clock. Refer to enclosed clock

operating manual for these

connections and setup.

2. With the original clock removed, carefully maneuver the VLK or VLC clock in place from

behind the dash while lining up the mounting holes of the clock to the studs behind the

dash making sure not to scratch the chrome bezel or clear lens, and then secure the

clock in place by using the stock mounting nuts.

VLK Clock

VLC Clock