Dakota Digital VLC-40F Mounting Manual

Manual 650409A

VLC/VLK-40F

Dakota Digital VLK Instrument Installation

For 1940 Ford car

Your new VLC/VLK-40F kit includes:

Installation

(4) Mounting

screws

CAT5 Cable

Installation Manuals

VLK Display

1. Remove the four screws holding the clock to the glove box on the back side.

VLC Display

Power Harness

(VLC ONLY)

Manual 650409A

2. Remove the clock assembly and rear housing.

3. Carefully position the new clock from the backside to avoid scratching the chrome. With

the four screws provided, secure the new clock to your original glove box.

Manual 650409A

WARNING: This product can expose you to chemicals including lead, which is known to the State of

California to cause cancer and birth defects or other reproductive harm. For more information go to

www.P65Warnings.ca.gov

4. Connect the CAT5 cable to the new clock;

with the VLC, connect the power harness

as well. Take care when routing this cable

to the control box.

5. Refer to the Operating Manual to complete the clock setup.

VLK shown

This manual is also suitable for

Download PDF