2. MOUNTUP
  3. MP0010-B
MP0010-B

MOUNTUP MP0010-B Installation guide

  • Hello! I am an AI chatbot trained to assist you with the MOUNTUP MP0010-B Installation guide. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
Safety Caution
Extra Tools You Need (Not Supplied)
Band
Tape
2M
Socket
Wrench
ScrewdriverPencil Electrodrill
Stud
Finder
HammerAwl Wood
Drill Bit
Masonry
Drill Bit
For Wood Studs For Concrete Wall
1/2"
(13mm)
3/8"
(10mm)
7/32"
(5.5mm)
Must Check Before Getting Started
Min. 8"
(203mm)
Solid concrete wall
<16mm(5/8")
Max.
16"(406mm)
Drywall with wood studs
Please read this instruction carefully before installation.
If you do not understand these instructions or have doubts about the safety of the installation, assembly or
use of this product, please contact us.
● This product is designed for use in wood stud or solid concrete wall.
- DO NOT install into drywall WITHOUT WOOD STUDS.
● The wall must be capable of supporting five times the weight of the TV and mount combined.
● Incorrect installation may result in product damage or body injury.
WARNING: This product contains small items that could be a choking hazard if swallowed.
Before starting assembly, verify all parts are included and undamaged. If any parts are missing or damaged,
do not return the damaged item to your dealer; please contact our customer service team. Never use
damaged parts!
STEP 1 Attach the TV Brackets STEP 2 Attach Wall Plate to Wall
Supplied Parts and Hardware
OPTION A: Wood Stud Installation
Locate the wood studs
Align & mark mounting holes with wood studs.
1-3 Attach the TV Brackets
No!
1-1 Select TV Screws.
1-2 With or without spacers.
No, just choose the screws, washers.
TV screws specification can be found in your TV user manual
TV back
Bracket
Long Screw
Spacer
Washer
Bracket Washer
TV back
Short Screw
TV Brackets
x2
E
Not for M8 Screws
optional
ME
MD or MF
MA or MB or MC
E
E
TOP OF TV
A-1
A-2
x4x4 x4x4 x4x4
Philips Screws
M4 x 12mm
M4 x 30mm
Philips Screws
M6 x 15mm
M6 x 30mm
Philips Screws
M8 x 25mm
M8 x 45mm
MA MB MC
x8
Spacers
M8 x 10mm
MD
x4
Washers
M6
ME
x8
Spacers
M8 x 5mm
MF
TV Screws / Spacers / Washers
1 2
345
Phillips
Screwdriver
STEP 1 (Continued)
NOTE: Not all hardware included will be used.
If you have any questions, please feel free to contact us via Amazon.
Velcro Cable Ties ×3 Bubble Level ×1
Max:
99LBS
(45KG)
Max: 400x400mm/16x16"
Min: 75x75mm/3x3"
01 040302
For more spacing
between bracket and TV
For raised back TV For Counterbore of TV To avoid the
blocked input
MAX:400mm/16"
MAX:
400mm/16"
Max:
99LBS
(45KG)
Bubble
Level
Center line Min. Wood Stud Size:
nominal 4"(102mm)
actual 3 1/2"(89mm)
Wall before Wood Stud
<16mm(5/8")
Min. Wood Stud Size:
nominal 2"(51mm)
actual 1 1/2"(38mm)
Max.
16"(406mm)
Lag Bolt
ST8x65mm
x4
A
M8 Washer
x4
B
Hardware (Wall / Product)
M8
M6
M4
INSTALLATION INSTRUCTION
YZ1204-ET-US1
Correct Correct
Too LongToo Short Not Vertical
16"/406mm
10"/254mm
5.12"
/130mm
x1
Wall Plate
Unit
D
CAUTION: DO NOT install into drywall WITHOUT WOOD STUDS.
x1
Open-end
Wrench
C
STEP 4 Adjustments
10
Leveling adjustment
If needed, TV can be leveled by ±3 degrees via adjusting the 4 nuts with the
open-end wrench .
Tighten
±3°
Tilting adjustment
If needed, TV can be tilted by +5~-13 degrees via adjusting the 2 nuts with
the open-end wrench .
+5°
-13°
Tighten
Tighten
C
C
C
3/8"
(10mm)
Product DimensionsSTEP 3 Hang and Secure TV to Wall Plate
+45°/-45°
Before hanging TV, please conduct "wall plate installation integrity test" first.
3-1 Wall Plate Installation Integrity Test
3-2 Hang and Secure TV to Wall Plate
Release preassembled screws down on brackets, hang TV with brackets onto the
Plate, then fasten the safety screws.
99 LBS (45KG)
2.75"(70mm)
OPTION B: Solid Concrete or Brick Wall Installation
A-3 Drill pilot holes
A-4
B-1 Min. 8"
(203mm)
DANGER
B-2
B-3
B-4
2.75"(70mm)
678
911
STEP 2 (Continued)STEP 2 (Continued) STEP 2 (Continued)
CAUTION: To avoid potential personal
injury or property damage:
All 4 lag bolts MUST BE firmly tightened
to prevent unwanted movement of the wall
plate assembly. Ensure the wall plate
assembly is securely fastened to the wall
before continuing on to the next step.
To prevent the TV falling down, the Arrow
Must Keep UP at this step!!
A
No! Install wall plate using lag bolts,
washer and anchor with Socket
Wrench, NO Electrodrill.
7/32"
(5.5mm)
UP
A
BB
A
UP
TV
1 2
TV must be hanged
up by two person
Bubble
Level
CAUTION: Do not use
in drywall or wood.
No!
Install wall plate using lag bolts
and washer with Socket Wrench,
NO Electrodrill.
CAUTION: To avoid potential personal
injury or property damage:
All 4 lag bolts MUST BE firmly tightened
to prevent unwanted movement of the wall
plate assembly. Ensure the wall plate
assembly is securely fastened to the wall
before continuing on to the next step.
To prevent the TV falling down, the Arrow
Must Keep UP at this step!!
A
+3°/-3°
Contact us to have
these additional pieces
shipped directly to you.
Ф10×61mm
Concrete wall anchor (NOT INCLUED)
435mm/17.13"
184mm
/7.24"
130mm
/5.12"
33.5mm
/1.32"
406mm/16"
254mm/10"
110mm/4.33"
MIN:
74mm
/2.91"
MAX:397mm/15.63"
75mm/2.95"
MAX:400mm/16"
MIN:75mm/3"
435mm/17.13"
130mm
/5.12"
Φ
8.5mm/0.33"
MAX:
400mm/16"
MIN:
75mm/3"
430mm
/16.93"
+5° -13°
Ensure the lag bolts to be screwed
into the studs tightly and securely.
Safety
Screw
Phillips
Screwdriver
Loosen
Loosen
Loosen
/