VIA Technologies VIPRO VP7710 User manual

VIPRO VP7710

VIPRO VP7710VIPRO VP7710

VIPRO VP7710

U

UU

U

SER

SERSER

SER

’

’’

’

S

S S

S

M

MM

M

ANUAL

ANUALANUAL

ANUAL

Version 1.06

November 24, 2008

Copyright

CopyrightCopyright

Copyright

No part of this document may be reproduced, transmitted, transcribed, stored in a retrieval system, or

translated into any language, in any form or by any means, electronic, mechanical, magnetic, optical,

chemical, manual or otherwise without the prior written permission of VIA Technologies, Incorporated.

Trademarks

TrademarksTrademarks

Trademarks

All trademarks are the property of their respective holders.

Macrovision

MacrovisionMacrovision

Macrovision

Apparatus Claims of U.S. Patent Nos. 4,631,603; 4,819,098; 4,907,093; 5,315,448; 6,516,132 licensed for

limited viewing uses only. This product incorporates copyright protection technology that is protected by

certain U.S. patents and other intellectual property rights owned by Macrovision and other rights owners.

Use of this copyright protection technology must be authorized by Macrovision, and is intended for home

and other limited viewing uses only unless otherwise authorized by Macrovision. Reverse engineering or

disassembly is prohibited.

Disclaimer

DisclaimerDisclaimer

Disclaimer

No license is granted, implied or otherwise, under any patent or patent rights of VIA Technologies. VIA

Technologies makes no warranties, implied or otherwise, in regard to this document and to the products

described in this document. The information provided in this document is believed to be accurate and

reliable as of the publication date of this document. However, VIA Technologies assumes no responsibility

for the use or misuse of the information in this document and for any patent infringements that may arise

from the use of this document. The information and product specifications within this document are subject

to change at any time, without notice and without obligation to notify any person of such change.

FCC

FCCFCC

FCC-

--

-B

BB

B Radio Frequency Interference Statement

Radio Frequency Interference Statement Radio Frequency Interference Statement

Radio Frequency Interference Statement

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1)

this device may not cause harmful interference, and (2) this device must accept any interference received,

including interference that may cause undesired operation.

Notice 1

Notice 1Notice 1

Notice 1

The changes or modifications not expressly approved by the party responsible for compliance could void the

user's authority to operate the equipment.

Notice 2

Notice 2Notice 2

Notice 2

Shielded interface cables and A.C. power cord, if any, must be used in order to comply with the emission

limits.

S

SS

S

AFETY

AFETY AFETY

AFETY

I

II

I

NSTRUCTIONS

NSTRUCTIONSNSTRUCTIONS

NSTRUCTIONS



Lay this equipment on a reliable flat surface before setting it up.



Always unplug the power cord before inserting any add-on card or module.



Make sure the voltage of the power source and adjust properly 110/220V

before connecting the equipment to the power inlet.



Place the power cord in such a way that people cannot step on it. Do not

place anything over the power cord.



Wear a grounded wrist strap when installing components.



Hold components by the edges to prevent damage to the components.



Do not flex or stress the components.



Use the correct screws with the correct threading. Do not over tighten

screws.



If any of the following situations arises, get the equipment checked by a

service personnel:

 The power cord or plug is damaged.

 Liquid has penetrated into the equipment.

 The equipment has been exposed to moisture.

 The equipment has not worked well or you cannot get it work

according to User's Manual.

 The equipment has dropped and damaged.

 If the equipment has obvious sign of breakage.



The openings on the enclosure are for air convection hence protects the

equipment from overheating. Do not cover the openings.



Never pour any liquid into the opening. Liquid can cause damage or

electrical shock.



Keep this equipment away from humidity.



Do not leave this equipment in an environment unconditioned or in a

storage temperature above 60

o

C (140

o

F). The equipment may be damaged.



Keep the original packaging and anti-static bag in case the unit has to be

returned.



Do not attempt to power-on the system if there is damage to any of its

components.

Caution

CautionCaution

Caution:

::

:

Only use the appropriate battery specified for this product.

Do not reuse, recharge, or reheat an old battery.

Do not attempt to force open the battery.

Do not discard used batteries with regular trash.

Discard used batteries according to local regulations.

P

PP

P

ACKAGE

ACKAGE ACKAGE

ACKAGE

C

CC

C

HECK

HECK HECK

HECK

L

LL

L

IST

ISTIST

IST



VIPRO VP7710 system unit x 1



Driver Utility



SATA data cable x 1



IDE data cable x 1



Power Cable, DIN-jack to DC-plug x 1



Panel mounting plate

T

TT

T

ABLE OF

ABLE OF ABLE OF

ABLE OF

C

CC

C

ONTENTS

ONTENTSONTENTS

ONTENTS

VIPRO VP7710 Overview................................................................................................ 1

Specifications.................................................................................................................2

Processor System....................................................................................................2

Graphics......................................................................................................................3

LCD Display ...............................................................................................................3

Touch Screen ............................................................................................................3

Ethernet.......................................................................................................................4

Audio............................................................................................................................4

Serial.............................................................................................................................4

Storage........................................................................................................................4

System Indicator......................................................................................................5

Watchdog Timer......................................................................................................5

System I/O .................................................................................................................5

Power Supply............................................................................................................6

Environmental Specification...............................................................................7

Mechanical.................................................................................................................8

Layout ...............................................................................................................................9

Installation..........................................................................................................................11

Removing the back plate....................................................................................... 11

Installing Memory..................................................................................................... 12

Installing the Hard Drive ........................................................................................ 14

Installing the CF Memory ...................................................................................... 16

Installing the WLAN Module (optional)........................................................... 18

Mounting Options ..........................................................................................................21

VESA Mounting Holes............................................................................................. 21

Desktop Stand (optional)....................................................................................... 22

Panel Mounting Kit................................................................................................... 23

Wall Mounting Kit (optional)................................................................................ 26

VIPRO VP7710 BIOS SETUP.........................................................................................27

Main Menu................................................................................................................... 27

Standard CMOS Features ...................................................................................... 29

IDE Drives ..................................................................................................................... 30

Advanced BIOS Features........................................................................................ 31

CPU Feature................................................................................................................. 34

Hard Disk Boot Priority........................................................................................... 35

Advanced Chipset Features .................................................................................. 36

AGP & P2P Bridge Control.................................................................................... 37

CPU & PCI Bus Control ........................................................................................... 39

TV Output Connector.............................................................................................. 40

Integrated Peripherals............................................................................................. 41

VIA OnChip PCI Device ........................................................................................... 42

USB Device Setting................................................................................................... 43

Power Management Setup ................................................................................... 45

Wakeup Event Detect.............................................................................................. 48

PnP/PCI Configurations.......................................................................................... 50

IRQ Resources ............................................................................................................ 52

PC Health Status........................................................................................................ 53

Frequency / Voltage Control................................................................................ 54

DRAM Clock/Drive Control ................................................................................... 55

Load Optimized Defaults ....................................................................................... 58

Set Supervisor / User Password .......................................................................... 59

Save & Exit Setup...................................................................................................... 60

Exit Without Saving.................................................................................................. 61

Appendix A ........................................................................................................................62

Introduction of VIPRO VP7710 External I/O Connectors ......................... 63

VIPRO VP7710 Bottom System External I/O Connectors......................... 64

Power Input Connector ..................................................................................... 64

Power ON/OFF Switch Button........................................................................ 64

Audio Connector.................................................................................................. 65

5V/12V switch for COM 2 and COM4 ......................................................... 65

RS-422/485 switch for COM1 ......................................................................... 65

LED indicators........................................................................................................ 65

COM2 and COM4 Connector ......................................................................... 66

COM1 Connector................................................................................................. 67

VGA Connector..................................................................................................... 68

VIPRO VP7710 Side System External I/O connectors ................................ 69

PS/2 Keyboard and PS/2 Mouse Connector............................................. 69

USB Connectors.................................................................................................... 70

Ethernet Connector (LAN)................................................................................ 71

VIPRO VP7710 User’s Manual

1

11

1

VIPRO VP7710

VIPRO VP7710VIPRO VP7710

VIPRO VP7710

Overview

OverviewOverview

Overview

The VIPRO VP7710 Fanless Panel PC is an embedded panel computer

with a 10.4” TFT LCD and resistive touch screen. The VIPRO VP7710 has

a NanoBGA2 central processor (VIA Eden ULV 1.6 GHz or C7 1.0 GHz) —

making it an ideal solution for applications that require low power

consumption, fanless and noise-free operation, and multiple IO ports.

It accepts a wide range of DC power input voltages (from DC 7V – 30V).

The VIPRO VP7710 Panel PC is equipped with one DDR2 533 MHz

SODIMM socket that supports up to 1 GB of memory, three COM ports

(one RS-422/485 and two RS-232 with a 5V/12V selector), one Gigabit

LAN, and two USB 2.0 ports.

The VIPRO VP7710 has an external VGA port that enables dual

independent displays and high definition audio ports that makes it good

for multimedia applications. Storage can be integrated into its internal

Compact Flash socket and 2.5" internal HDD drive bay. It also includes a

variety of mounting options that make it a flexible system to install.

These features make the VIPRO VP7710 Fanless Panel PC suitable for a

wide variety of embedded, multimedia, and industrial HMI (Human

Machine Interface) applications including factory automation systems,

precision machinery, production process control, terminal information

systems, entertainment management systems, and car park automation

systems…etc. The VIPRO VP7710 is a reliable, cost-effective solution that

can shorten your application development time.

VIPRO VP7710 User’s Manual

2

22

2

Specifications

SpecificationsSpecifications

Specifications

Processor System

Processor

ProcessorProcessor

Processor

• VIA Eden ULV 1.6 GHz (for VP-7710-R1E16A1)

o 800 MHz FSB

o 128 KB L2 cache

o NanoBGA2 package

• VIA C7

®

1.0 GHz (for VP-7710-R1C10A1)

o 400 MHz FSB

o 128 KB L2 cache

o NanoBGA2 package

Chipset

ChipsetChipset

Chipset

• VIA CX700M2 Unified Digital IGP chipset

BIOS

BIOSBIOS

BIOS

• Award 4-Mbit Flash BIOS

System Power Management

System Power ManagementSystem Power Management

System Power Management

• Timer Power On

• ACPI Support

System

System System

System Memory

MemoryMemory

Memory

• 1 x 200-pin DDR2 533 SDRAM SODIMM socket

• Supports up to 1 GB of DDR2 SDRAM

VIPRO VP7710 User’s Manual

3

33

3

Graphics

Controller

ControllerController

Controller

• Integrated VIA UniChrome™ Pro II 3D/2D AGP graphics with

MPEG-2/4 and WMV9 video decoding acceleration

Display Memory

Display MemoryDisplay Memory

Display Memory

• Optimized Shared Memory Architecture, supports up to 128

MB frame buffer using system memory

LCD Display

LCD Type

LCD TypeLCD Type

LCD Type

• 10.4” Color TFT LCD panel

Resolution/Color

Resolution/ColorResolution/Color

Resolution/Color

• Up to 800 X 600 @ 262K

Pixel pitch (mm)

Pixel pitch (mm)Pixel pitch (mm)

Pixel pitch (mm)

• 0.264 x 0.264

Viewing angle

Viewing angleViewing angle

Viewing angle

• 70° (right), 70° (left), 50° (up) and 60° (down)

Luminance

LuminanceLuminance

Luminance

• 230 cd/m

2

Backlight MTBF

Backlight MTBFBacklight MTBF

Backlight MTBF

• 30,000 hours (typical)

Touch Screen

Type

TypeType

Type

• Analog Resistive, continuous resolution

(up to 1 million touches)

Light Transmission

Light TransmissionLight Transmission

Light Transmission

• 82.5% (Typical)

Controller

ControllerController

Controller

• USB interface

VIPRO VP7710 User’s Manual

4

44

4

Ethernet

Controller

ControllerController

Controller

• VIA VT6122 Gigabit Ethernet

Interface

InterfaceInterface

Interface

• Supports one RJ45 connector

• Supports Wake On LAN (WOL)

• Supports Pre-boot Execution Environment (PXE)

Audio

Controller

ControllerController

Controller

• VIA VT1708A High Definition Audio Codec

Interface

InterfaceInterface

Interface

• Supports Line-in, Speaker-out, and Mic-in connectors

Serial

USB

USBUSB

USB

• 2 x USB ports, USB 2.0 compliant

Serial Ports

Serial PortsSerial Ports

Serial Ports

• 3 x COM ports consisting of 2 x RS-232 and 1 x RS-422/485

• 5V/12V selectable

Storage

HDD

HDDHDD

HDD

• 1 x 2.5 inch drive bay

Compact Flash

Compact FlashCompact Flash

Compact Flash

• 1 x Type I socket

VIPRO VP7710 User’s Manual

5

55

5

System Indicator

Power Status LED

Power Status LEDPower Status LED

Power Status LED

• 1 x orange color LED

HDD Activity LED

HDD Activity LEDHDD Activity LED

HDD Activity LED

• 1 x blue color LED

Watchdog Timer

Output

OutputOutput

Output

• System reset

Interval

IntervalInterval

Interval

• Programmable 1~255 seconds

System I/O

Bottom I/O ports

Bottom I/O portsBottom I/O ports

Bottom I/O ports

• 1 x VGA connector

• 1 x RS-422/485 serial port (COM1)

• 2 x RS-232 serial ports (COM2 and COM4)

• 1 x 5V/12V selectable switch for COM2 and COM4

• 3 x Audio jacks consisting of Line-out, Line-in, and Mic-in

• 1 x ATX power button

• 1 x 2-pole, DC DIN jack power input connector

• 1 x antenna hole for the optional WLAN

Side I/O ports

Side I/O portsSide I/O ports

Side I/O ports

• 1 x PS/2 mouse connector

• 1 x PS/2 keyboard connector

• 2 x USB 2.0 connectors

• 1 x RJ45 connector

Note:

Note: Note:

Note:

Refer to Appendix A for the pin assignments of the system I/O ports.

VIPRO VP7710 User’s Manual

6

66

6

Power Supply

Sub

SubSub

Sub-

--

-Model

ModelModel

Model

V

VV

VP

PP

P7710

77107710

7710-

--

-R1E16A1

R1E16A1R1E16A1

R1E16A1

VP7710

VP7710VP7710

VP7710-

--

-R1C10A1

R1C10A1R1C10A1

R1C10A1

Power Consumption

Maximum 32w

Typical 24.6W

Maximum 28w

Typical 22.8W

Input Voltage

7V

DC

~ 30V

DC

Typical

7V

DC

@ 4.57A

12V

DC

@ 2.66A

16V

DC

@ 1.93A

19V

DC

@ 1.68A

24V

DC

@ 1.33A

30V

DC

@ 1.1A

7V

DC

~ 30V

DC

Typical

7V

DC

@ 3.25A

12V

DC

@ 1.9A

16V

DC

@ 1.42A

19V

DC

@ 1.2A

24V

DC

@ 0.95A

30V

DC

@ 0.76A

Input Power Protection

Support Over Voltage protection

Support Over Current Protection

Support Under Voltage Protection

VIPRO VP7710 User’s Manual

7

77

7

Environmental Specification

Operating Temperature

Operating TemperatureOperating Temperature

Operating Temperature

• 0°C ~ 45 °C

Sto

StoSto

Storage

ragerage

rage Temperature

Temperature Temperature

Temperature

• -20°C ~ 70 °C

Relative Humidity

Relative HumidityRelative Humidity

Relative Humidity

• 0 ~ 90% @ 45°C, non-condensing

Vibration Loading during operation

Vibration Loading during operationVibration Loading during operation

Vibration Loading during operation

• When the system is only equipped with a Compact Flash Disk:

5 Grms, IEC 60068-2-64, random, 5 ~ 500 Hz, 1 Oct./min, 1

hr/axis

Shock durin

Shock durinShock durin

Shock during operation

g operationg operation

g operation

• When system equipped with 2.5-inch Hard Disk Drive:

20 G, IEC 60068-2-27, half size, 11 ms duration

• When system equipped with Compact Flash Disk:

50 G, IEC 60068-2-27, half size, 11 ms duration

Front Panel Protection

Front Panel ProtectionFront Panel Protection

Front Panel Protection

• IP 65 compliant

EMC Ap

EMC ApEMC Ap

EMC Approved

provedproved

proved

• CE/FCC Class B

Safety Approved

Safety ApprovedSafety Approved

Safety Approved

• UL/CB

VIPRO VP7710 User’s Manual

8

88

8

Mechanical

Construction

ConstructionConstruction

Construction

• Aluminum mixed with heavy-duty steel

Mounting

MountingMounting

Mounting

• Panel/Wall/Table/VESA mountable

Weight

WeightWeight

Weight

• 3.6 kg (7.9 lbs)

Dimensions (W x H x D)

Dimensions (W x H x D)Dimensions (W x H x D)

Dimensions (W x H x D)

• 300.4 mm x 205.9 mm x 55.2 mm (11.82” x 8.1” x 2.17”)

• VESA MIS-D 100 mounting interface (100 mm x 100 mm)

Note:

Note: Note:

Note:

Specifications are subject to change without prior notice.

Unit: mm

Unit: mmUnit: mm

Unit: mm

VIPRO VP7710 User’s Manual

9

99

9

Layout

LayoutLayout

Layout

VIPRO VP7710 User’s Manual

10

1010

10

VIPRO VP7710 User’s Manual

11

1111

11

I

II

In

nn

nstall

stallstall

stallation

ationation

ation

Removing the

Removing the Removing the

Removing the back plate

back plateback plate

back plate

Remove the screws and lift off the back plate.

VIPRO VP7710 User’s Manual

12

1212

12

Installing

Installing Installing

Installing Memory

MemoryMemory

Memory

Step 1

Step 1Step 1

Step 1

Locate the memory slot.

VIPRO VP7710 User’s Manual

13

1313

13

Step

Step Step

Step 2

22

2

Align the notch on the SODIMM with the memory slot.

Step

Step Step

Step 3

33

3

Insert the SODIMM at a 45 degree angle. Then push the SODIMM down

until it snaps into the locking mechanism.

Note:

Note:Note:

Note:

Due to certain hardware limitations, DDR2 SDRAM modules

organized as 8 banks of 128 MB are not supported.

VIPRO VP7710 User’s Manual

14

1414

14

Installing the

Installing the Installing the

Installing the H

HH

Hard

ard ard

ard D

DD

Drive

riverive

rive

Step 1

Step 1Step 1

Step 1

Remove the four flat screws and the hard drive mounting plate.

Step

Step Step

Step 2

22

2

Attach the 2.5 inch hard disk to the hard drive mounting plate.

Page is loading ...

VIA Technologies VIPRO VP7710 User manual

VIA Technologies VIPRO VP7710 User manual

Related papers

Other documents